1
0
Fork 0

Improve mouse keys docs and constant speed mode

This commit is contained in:
Markus Weimar 2018-10-17 10:40:52 +02:00 committed by Drashna Jaelre
parent 74af596d8a
commit e3a940026e
3 changed files with 136 additions and 114 deletions

View file

@ -1,114 +1,121 @@
# Mousekeys # Mouse keys
Mouse keys is a feature that allows you to emulate a mouse using your keyboard. You can move the pointer at different speeds, press 5 buttons and scroll in all 8 directions.
Mousekeys is a feature that allows you to emulate a mouse using your keyboard. You can move the pointer around, click up to 5 buttons, and even scroll in all 4 directions. ## Adding mouse keys to your keyboard
There are 2 ways to define how the mousekeys behave, using "[auto-accelerating](#configuring-the-behavior-of-mousekeys-with-auto-accelerated-movement)" or "[3-speed constant](#configuring-the-behavior-of-mousekeys-with-3-speed-constant-movement)" behavior. To use mouse keys, you must at least enable mouse keys support and map mouse actions to keys on your keyboard.
In either case, you will need to enable mousekeys in your makefile, ### Enabling mouse keys
and add the relevant [keycodes](#mapping-mouse-actions-to-keyboard-keys) to your keymap.
#### Enable Mousekeys To enable mouse keys, add the following line to your keymaps `rules.mk`:
To enable the mousekey functionality, add the following line to your keymap's `rules.mk`: ```c
```
MOUSEKEY_ENABLE = yes MOUSEKEY_ENABLE = yes
``` ```
#### Mapping Mouse Actions to Keyboard Keys ### Mapping mouse actions
You can use these keycodes within your keymap to map button presses to mouse actions: In your keymap you can use the following keycodes to map key presses to mouse actions:
|Key |Aliases |Description | |Key |Aliases |Description |
|----------------|---------|-----------------------------------| |----------------|---------|-----------------|
|`KC_MS_UP` |`KC_MS_U`|Mouse Cursor Up | |`KC_MS_UP` |`KC_MS_U`|Move cursor up |
|`KC_MS_DOWN` |`KC_MS_D`|Mouse Cursor Down | |`KC_MS_DOWN` |`KC_MS_D`|Move cursor down |
|`KC_MS_LEFT` |`KC_MS_L`|Mouse Cursor Left | |`KC_MS_LEFT` |`KC_MS_L`|Move cursor left |
|`KC_MS_RIGHT` |`KC_MS_R`|Mouse Cursor Right | |`KC_MS_RIGHT` |`KC_MS_R`|Move cursor right|
|`KC_MS_BTN1` |`KC_BTN1`|Mouse Button 1 | |`KC_MS_BTN1` |`KC_BTN1`|Press button 1 |
|`KC_MS_BTN2` |`KC_BTN2`|Mouse Button 2 | |`KC_MS_BTN2` |`KC_BTN2`|Press button 2 |
|`KC_MS_BTN3` |`KC_BTN3`|Mouse Button 3 | |`KC_MS_BTN3` |`KC_BTN3`|Press button 3 |
|`KC_MS_BTN4` |`KC_BTN4`|Mouse Button 4 | |`KC_MS_BTN4` |`KC_BTN4`|Press button 4 |
|`KC_MS_BTN5` |`KC_BTN5`|Mouse Button 5 | |`KC_MS_BTN5` |`KC_BTN5`|Press button 5 |
|`KC_MS_WH_UP` |`KC_WH_U`|Mouse Wheel Up | |`KC_MS_WH_UP` |`KC_WH_U`|Move wheel up |
|`KC_MS_WH_DOWN` |`KC_WH_D`|Mouse Wheel Down | |`KC_MS_WH_DOWN` |`KC_WH_D`|Move wheel down |
|`KC_MS_WH_LEFT` |`KC_WH_L`|Mouse Wheel Left | |`KC_MS_WH_LEFT` |`KC_WH_L`|Move wheel left |
|`KC_MS_WH_RIGHT`|`KC_WH_R`|Mouse Wheel Right | |`KC_MS_WH_RIGHT`|`KC_WH_R`|Move wheel right |
|`KC_MS_ACCEL0` |`KC_ACL0`|Set mouse acceleration to 0(slow) | |`KC_MS_ACCEL0` |`KC_ACL0`|Set speed to 0 |
|`KC_MS_ACCEL1` |`KC_ACL1`|Set mouse acceleration to 1(medium)| |`KC_MS_ACCEL1` |`KC_ACL1`|Set speed to 1 |
|`KC_MS_ACCEL2` |`KC_ACL2`|Set mouse acceleration to 2(fast) | |`KC_MS_ACCEL2` |`KC_ACL2`|Set speed to 2 |
For an example, see [the mouse layer in this keymap](https://github.com/qmk/qmk_firmware/blob/1df10ae3bfc146805c75b06dc0c126cd1ef3a60a/keyboards/clueboard/66/keymaps/mouse_keys/keymap.c#L40).
## Configuring the Behavior of Mousekeys with auto-accelerated movement ## Configuring mouse keys
This behavior is intended to emulate the X Window System MouseKeysAccel feature. You can read more about it [on Wikipedia](https://en.wikipedia.org/wiki/Mouse_keys). Mouse keys supports two different modes to move the cursor:
The default speed for controlling the mouse with the keyboard is intentionally slow. You can adjust these parameters by adding these settings to your keymap's `config.h` file. All times are specified in milliseconds (ms). * **Accelerated (default):** Holding movement keys accelerates the cursor until it reaches its maximum speed.
* **Constant:** Holding movement keys moves the cursor at constant speeds.
``` The same principle applies to scrolling.
#define MOUSEKEY_DELAY 300
#define MOUSEKEY_INTERVAL 50
#define MOUSEKEY_MAX_SPEED 10
#define MOUSEKEY_TIME_TO_MAX 20
#define MOUSEKEY_WHEEL_MAX_SPEED 8
#define MOUSEKEY_WHEEL_TIME_TO_MAX 40
```
#### `MOUSEKEY_DELAY` Configuration options that are times, intervals or delays are given in milliseconds. Scroll speed is given as multiples of the default scroll step. For example, a scroll speed of 8 means that each scroll action covers 8 times the length of the default scroll step as defined by your operating system or application.
When one of the mouse movement buttons is pressed this setting is used to define the delay between that button press and the mouse cursor moving. Some people find that small movements are impossible if this setting is too low, while settings that are too high feel sluggish. ### Accelerated mode
#### `MOUSEKEY_INTERVAL` This is the default mode. You can adjust the cursor and scrolling acceleration using the following settings in your keymaps `config.h` file:
When a movement key is held down this specifies how long to wait between each movement report. Lower settings will translate into an effectively higher mouse speed. |Define |Default|Description |
|----------------------------|-------|---------------------------------------------------------|
|`MOUSEKEY_DELAY` |300 |Delay between pressing a movement key and cursor movement|
|`MOUSEKEY_INTERVAL` |50 |Time between cursor movements |
|`MOUSEKEY_MAX_SPEED` |10 |Maximum cursor speed at which acceleration stops |
|`MOUSEKEY_TIME_TO_MAX` |20 |Time until maximum cursor speed is reached |
|`MOUSEKEY_WHEEL_MAX_SPEED` |8 |Maximum number of scroll steps per scroll action |
|`MOUSEKEY_WHEEL_TIME_TO_MAX`|40 |Time until maximum scroll speed is reached |
#### `MOUSEKEY_MAX_SPEED` Tips:
As a movement key is held down the speed of the mouse cursor will increase until it reaches `MOUSEKEY_MAX_SPEED`. * Setting `MOUSEKEY_DELAY` too low makes the cursor unresponsive. Setting it too high makes small movements difficult.
* For smoother cursor movements, lower the value of `MOUSEKEY_INTERVAL`. If the refresh rate of your display is 60Hz, you could set it to `16` (1/60). As this raises the cursor speed significantly, you may want to lower `MOUSEKEY_MAX_SPEED`.
* Setting `MOUSEKEY_TIME_TO_MAX` or `MOUSEKEY_WHEEL_TIME_TO_MAX` to `0` will disable acceleration for the cursor or scrolling respectively. This way you can make one of them constant while keeping the other accelerated, which is not possible in constant speed mode.
#### `MOUSEKEY_TIME_TO_MAX` Cursor acceleration uses the same algorithm as the X Window System MouseKeysAccel feature. You can read more about it [on Wikipedia](https://en.wikipedia.org/wiki/Mouse_keys).
How long you want to hold down a movement key for until `MOUSEKEY_MAX_SPEED` is reached. This controls how quickly your cursor will accelerate. ### Constant mode
#### `MOUSEKEY_WHEEL_MAX_SPEED` In this mode you can define multiple different speeds for both the cursor and the mouse wheel. There is no acceleration. `KC_ACL0`, `KC_ACL1` and `KC_ACL2` change the cursor and scroll speed to their respective setting.
The top speed for scrolling movements. You can choose whether speed selection is momentary or tap-to-select:
#### `MOUSEKEY_WHEEL_TIME_TO_MAX` * **Momentary:** The chosen speed is only active while you hold the respective key. When the key is raised, mouse keys returns to the unmodified speed.
* **Tap-to-select:** The chosen speed is activated when you press the respective key and remains active even after the key has been raised. The default speed is that of `KC_ACL1`. There is no unmodified speed.
How long you want to hold down a scroll key for until `MOUSEKEY_WHEEL_MAX_SPEED` is reached. This controls how quickly your scrolling will accelerate. The default speeds from slowest to fastest are as follows:
* **Momentary:** `KC_ACL0` < `KC_ACL1` < *unmodified* < `KC_ACL2`
* **Tap-to-select:** `KC_ACL0` < `KC_ACL1` < `KC_ACL2`
## Configuring the Behavior of Mousekeys with 3-speed constant movement To use constant speed mode, you must at least define `MK_3_SPEED` in your keymaps `config.h` file:
In your keymap's `config.h`, you must add the line: ```c
```
#define MK_3_SPEED #define MK_3_SPEED
``` ```
Then you can precisely define 3 different speeds for both the cursor and the mouse wheel, and also whether speed selection is momentary or tap-to-select.
For each speed, you can specify how many milliseconds you want between reports(interval), and how far you want to it to move per report(offset).
For example: To enable momentary mode, also define `MK_MOMENTARY_ACCEL`:
``` ```c
#define MK_3_SPEED #define MK_MOMENTARY_ACCEL
#define MK_MOMENTARY_ACCEL // comment this out for tap-to-select acceleration
// cursor speeds:
#define MK_C_OFFSET_SLOW 1 // pixels
#define MK_C_INTERVAL_SLOW 100 // milliseconds
#define MK_C_OFFSET_MED 4
#define MK_C_INTERVAL_MED 16
#define MK_C_OFFSET_FAST 12
#define MK_C_INTERVAL_FAST 16
// scroll wheel speeds:
#define MK_W_OFFSET_SLOW 1 // wheel clicks
#define MK_W_INTERVAL_SLOW 400 // milliseconds
#define MK_W_OFFSET_MED 1
#define MK_W_INTERVAL_MED 200
#define MK_W_OFFSET_FAST 1
#define MK_W_INTERVAL_FAST 100
``` ```
Medium values will be used as the default or unmodified speed. Use the following settings if you want to adjust cursor movement or scrolling:
The speed at which both the cursor and scrolling move can be selected with KC_ACL0, KC_ACL1, KC_ACL2 for slow, medium, and fast. However, if you leave MK_MOMENTARY_ACCEL defined then there is no need to ever send KC_ACL1, since that will be the unmodified speed.
|Define |Default |Description |
|---------------------|-------------|-------------------------------------------|
|`MK_3_SPEED` |*Not defined*|Enable constant cursor speeds |
|`MK_MOMENTARY_ACCEL` |*Not defined*|Enable momentary speed selection |
|`MK_C_OFFSET_UNMOD` |16 |Cursor offset per movement (unmodified) |
|`MK_C_INTERVAL_UNMOD`|16 |Time between cursor movements (unmodified) |
|`MK_C_OFFSET_0` |1 |Cursor offset per movement (`KC_ACL0`) |
|`MK_C_INTERVAL_0` |32 |Time between cursor movements (`KC_ACL0`) |
|`MK_C_OFFSET_1` |4 |Cursor offset per movement (`KC_ACL1`) |
|`MK_C_INTERVAL_1` |16 |Time between cursor movements (`KC_ACL1`) |
|`MK_C_OFFSET_2` |32 |Cursor offset per movement (`KC_ACL2`) |
|`MK_C_INTERVAL_2` |16 |Time between cursor movements (`KC_ACL2`) |
|`MK_W_OFFSET_UNMOD` |1 |Scroll steps per scroll action (unmodified)|
|`MK_W_INTERVAL_UNMOD`|40 |Time between scroll steps (unmodified) |
|`MK_W_OFFSET_0` |1 |Scroll steps per scroll action (`KC_ACL0`) |
|`MK_W_INTERVAL_0` |360 |Time between scroll steps (`KC_ACL0`) |
|`MK_W_OFFSET_1` |1 |Scroll steps per scroll action (`KC_ACL1`) |
|`MK_W_INTERVAL_1` |120 |Time between scroll steps (`KC_ACL1`) |
|`MK_W_OFFSET_2` |1 |Scroll steps per scroll action (`KC_ACL2`) |
|`MK_W_INTERVAL_2` |20 |Time between scroll steps (`KC_ACL2`) |

View file

@ -171,28 +171,31 @@ void mousekey_off(uint8_t code) {
enum { enum {
mkspd_slow, mkspd_unmod,
mkspd_med, mkspd_0,
mkspd_fast, mkspd_1,
mkspd_2,
mkspd_COUNT mkspd_COUNT
}; };
static uint8_t mk_speed = mkspd_med; #ifndef MK_MOMENTARY_ACCEL
#ifdef MK_MOMENTARY_ACCEL static uint8_t mk_speed = mkspd_1;
static uint8_t mkspd_DEFAULT = mkspd_med; #else
static uint8_t mk_speed = mkspd_unmod;
static uint8_t mkspd_DEFAULT = mkspd_unmod;
#endif #endif
static uint16_t last_timer_c = 0; static uint16_t last_timer_c = 0;
static uint16_t last_timer_w = 0; static uint16_t last_timer_w = 0;
uint16_t c_offsets[mkspd_COUNT] = { uint16_t c_offsets[mkspd_COUNT] = {
MK_C_OFFSET_SLOW, MK_C_OFFSET_MED, MK_C_OFFSET_FAST MK_C_OFFSET_UNMOD, MK_C_OFFSET_0, MK_C_OFFSET_1, MK_C_OFFSET_2
}; };
uint16_t c_intervals[mkspd_COUNT] = { uint16_t c_intervals[mkspd_COUNT] = {
MK_C_INTERVAL_SLOW, MK_C_INTERVAL_MED, MK_C_INTERVAL_FAST MK_C_INTERVAL_UNMOD, MK_C_INTERVAL_0, MK_C_INTERVAL_1, MK_C_INTERVAL_2
}; };
uint16_t w_offsets[mkspd_COUNT] = { uint16_t w_offsets[mkspd_COUNT] = {
MK_W_OFFSET_SLOW, MK_W_OFFSET_MED, MK_W_OFFSET_FAST MK_W_OFFSET_UNMOD, MK_W_OFFSET_0, MK_W_OFFSET_1, MK_W_OFFSET_2
}; };
uint16_t w_intervals[mkspd_COUNT] = { uint16_t w_intervals[mkspd_COUNT] = {
MK_W_INTERVAL_SLOW, MK_W_INTERVAL_MED, MK_W_INTERVAL_FAST MK_W_INTERVAL_UNMOD, MK_W_INTERVAL_0, MK_W_INTERVAL_1, MK_W_INTERVAL_2
}; };
@ -254,9 +257,9 @@ void mousekey_on(uint8_t code) {
else if (code == KC_MS_BTN3) mouse_report.buttons |= MOUSE_BTN3; else if (code == KC_MS_BTN3) mouse_report.buttons |= MOUSE_BTN3;
else if (code == KC_MS_BTN4) mouse_report.buttons |= MOUSE_BTN4; else if (code == KC_MS_BTN4) mouse_report.buttons |= MOUSE_BTN4;
else if (code == KC_MS_BTN5) mouse_report.buttons |= MOUSE_BTN5; else if (code == KC_MS_BTN5) mouse_report.buttons |= MOUSE_BTN5;
else if (code == KC_MS_ACCEL0) mk_speed = mkspd_slow; else if (code == KC_MS_ACCEL0) mk_speed = mkspd_0;
else if (code == KC_MS_ACCEL1) mk_speed = mkspd_med; else if (code == KC_MS_ACCEL1) mk_speed = mkspd_1;
else if (code == KC_MS_ACCEL2) mk_speed = mkspd_fast; else if (code == KC_MS_ACCEL2) mk_speed = mkspd_2;
if (mk_speed != old_speed) adjust_speed(); if (mk_speed != old_speed) adjust_speed();
} }

View file

@ -64,42 +64,54 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#else /* #ifndef MK_3_SPEED */ #else /* #ifndef MK_3_SPEED */
#ifndef MK_C_OFFSET_SLOW #ifndef MK_C_OFFSET_UNMOD
#define MK_C_OFFSET_SLOW 1 #define MK_C_OFFSET_UNMOD 16
#endif #endif
#ifndef MK_C_INTERVAL_SLOW #ifndef MK_C_INTERVAL_UNMOD
#define MK_C_INTERVAL_SLOW 100 #define MK_C_INTERVAL_UNMOD 16
#endif #endif
#ifndef MK_C_OFFSET_MED #ifndef MK_C_OFFSET_0
#define MK_C_OFFSET_MED 4 #define MK_C_OFFSET_0 1
#endif #endif
#ifndef MK_C_INTERVAL_MED #ifndef MK_C_INTERVAL_0
#define MK_C_INTERVAL_MED 16 #define MK_C_INTERVAL_0 32
#endif #endif
#ifndef MK_C_OFFSET_FAST #ifndef MK_C_OFFSET_1
#define MK_C_OFFSET_FAST 12 #define MK_C_OFFSET_1 4
#endif #endif
#ifndef MK_C_INTERVAL_FAST #ifndef MK_C_INTERVAL_1
#define MK_C_INTERVAL_FAST 16 #define MK_C_INTERVAL_1 16
#endif
#ifndef MK_C_OFFSET_2
#define MK_C_OFFSET_2 32
#endif
#ifndef MK_C_INTERVAL_2
#define MK_C_INTERVAL_2 16
#endif #endif
#ifndef MK_W_OFFSET_SLOW #ifndef MK_W_OFFSET_UNMOD
#define MK_W_OFFSET_SLOW 1 #define MK_W_OFFSET_UNMOD 1
#endif #endif
#ifndef MK_W_INTERVAL_SLOW #ifndef MK_W_INTERVAL_UNMOD
#define MK_W_INTERVAL_SLOW 400 #define MK_W_INTERVAL_UNMOD 40
#endif #endif
#ifndef MK_W_OFFSET_MED #ifndef MK_W_OFFSET_0
#define MK_W_OFFSET_MED 1 #define MK_W_OFFSET_0 1
#endif #endif
#ifndef MK_W_INTERVAL_MED #ifndef MK_W_INTERVAL_0
#define MK_W_INTERVAL_MED 200 #define MK_W_INTERVAL_0 360
#endif #endif
#ifndef MK_W_OFFSET_FAST #ifndef MK_W_OFFSET_1
#define MK_W_OFFSET_FAST 1 #define MK_W_OFFSET_1 1
#endif #endif
#ifndef MK_W_INTERVAL_FAST #ifndef MK_W_INTERVAL_1
#define MK_W_INTERVAL_FAST 100 #define MK_W_INTERVAL_1 120
#endif
#ifndef MK_W_OFFSET_2
#define MK_W_OFFSET_2 1
#endif
#ifndef MK_W_INTERVAL_2
#define MK_W_INTERVAL_2 20
#endif #endif
#endif /* #ifndef MK_3_SPEED */ #endif /* #ifndef MK_3_SPEED */