From b56707a5177489b01ad0b79b4ef0be80c8573d23 Mon Sep 17 00:00:00 2001
From: Albert Y <76888457+filterpaper@users.noreply.github.com>
Date: Tue, 1 Feb 2022 10:07:33 +0800
Subject: [PATCH 1/2] [Keyboard] Simplify handedness for cradio (#16147)

---
 keyboards/cradio/config.h  |  3 ---
 keyboards/cradio/readme.md | 33 ++-------------------------------
 2 files changed, 2 insertions(+), 34 deletions(-)

diff --git a/keyboards/cradio/config.h b/keyboards/cradio/config.h
index 37c329a244..aba6050af1 100644
--- a/keyboards/cradio/config.h
+++ b/keyboards/cradio/config.h
@@ -67,9 +67,6 @@
 /* serial.c configuration for split keyboard */
 #define SOFT_SERIAL_PIN D2
 
-/* Split handedness */
-#define EE_HANDS
-
 /* Top left key on left half */
 #define BOOTMAGIC_LITE_ROW    0
 #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/cradio/readme.md b/keyboards/cradio/readme.md
index c6013006d4..7f3cef0969 100644
--- a/keyboards/cradio/readme.md
+++ b/keyboards/cradio/readme.md
@@ -20,40 +20,11 @@ Make example for this keyboard (after setting up your build environment):
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 
-## Setting Handedness
-
-Firmware uses [handedness by EEPROM](https://docs.qmk.fm/#/feature_split_keyboard?id=handedness-by-eeprom) as default and it must be *configured once* on each side. The make commands are:
-
-    make cradio:default:dfu-split-left
-    make cradio:default:dfu-split-right
-
-[QMK Toolbox](http://qmk.fm/toolbox) can also be used to set EEPROM handedness. Place the controller in bootloader mode and select menu option Tools -> EEPROM -> Set Left/Right Hand
-
 ## Bootloader
 
 Enter the bootloader in 3 ways:
 
-* **Bootmagic reset**: Hold down the top left key on the left half (or the top right right key on the right half) and plug in the controller on that side.
-* **Physical reset button**: Briefly press the reset button soldered on the PCB.
 * **Keycode in layout**: Press the key mapped to `RESET` if it is configured.
-
-## Swapped Pins
-
-If you have one of the PCB variant with swapped letters `Q` and `B` / `P` and `N`, add the following code to your keymap's `config.h` to swap pins `E6` and `D7` in the firmware:
-```c
-#undef DIRECT_PINS
-#define DIRECT_PINS { \
-    { D7, F7, F6, F5, F4 }, \
-    { B1, B3, B2, B6, D3 }, \
-    { D1, D0, D4, C6, E6 }, \
-    { B4, B5, NO_PIN, NO_PIN, NO_PIN } \
-}
-#undef DIRECT_PINS_RIGHT
-#define DIRECT_PINS_RIGHT { \
-    { F4, F5, F6, F7, D7 }, \
-    { D3, B6, B2, B3, B1 }, \
-    { E6, C6, D4, D0, D1 }, \
-    { B5, B4, NO_PIN, NO_PIN, NO_PIN } \
-}
-```
+* **Physical reset button**: Briefly press the reset button soldered on the PCB.
+* **Bootmagic reset**: Hold down the top left key on the left half (or the top right key on the right half) and plug in the controller on that side.
 

From 68473e66b6f9154c3f525e0928f1d22e7fb96963 Mon Sep 17 00:00:00 2001
From: Albert Y <76888457+filterpaper@users.noreply.github.com>
Date: Tue, 1 Feb 2022 10:07:57 +0800
Subject: [PATCH 2/2] [Keyboard] Typo correction in ferris sweep readme
 (#16148)

---
 keyboards/ferris/sweep/readme.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/keyboards/ferris/sweep/readme.md b/keyboards/ferris/sweep/readme.md
index b6ee790943..332ab2c790 100644
--- a/keyboards/ferris/sweep/readme.md
+++ b/keyboards/ferris/sweep/readme.md
@@ -35,7 +35,7 @@ For Elite-C or compatible controllers using `DFU` bootloader, add the line `BOOT
 
 Enter the bootloader in 3 ways:
 
-* **Bootmagic reset**: Hold down the top left key on the left half (or the top right right key on the right half) and plug in the controller on that side.
+* **Bootmagic reset**: Hold down the top left key on the left half (or the top right key on the right half) and plug in the controller on that side.
 * **Physical reset button**: Briefly press the reset button soldered on the PCB.
 * **Keycode in layout**: Press the key mapped to `RESET` if it is configured.