1
0
Fork 0

[Keyboard] Add Quasar SSK Controller (#6201)

* Begin work

* Finalize files

* Fix readme

* Update readme.md

* Add configurator support

* Update keyboards/ai03/quasar/rules.mk

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Remove tailing backslashes in keymaps
This commit is contained in:
ai03 2019-06-29 02:52:26 +09:00 committed by Drashna Jaelre
parent 064bdf7b6c
commit e4b91cffea
10 changed files with 668 additions and 0 deletions

View file

@ -0,0 +1,251 @@
/*
Copyright 2019 Ryota Goto
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xA103
#define PRODUCT_ID 0x0010
#define DEVICE_VER 0x0001
#define MANUFACTURER Ryota Goto
#define PRODUCT Quasar
#define DESCRIPTION SSK Controller
/* key matrix size */
#define MATRIX_ROWS 8
#define MATRIX_COLS 16
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5, D4, D6, D7 }
#define MATRIX_COL_PINS { B0, B1, B2, B3, B7, F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4 }
#define UNUSED_PINS
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
/*
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
*/
#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
// #define BACKLIGHT_PIN B7
// #define BACKLIGHT_BREATHING
// #define BACKLIGHT_LEVELS 3
// #define RGB_DI_PIN E2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 16
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== all animations enable ==*/
// #define RGBLIGHT_ANIMATIONS
// /*== or choose animations ==*/
// #define RGBLIGHT_EFFECT_BREATHING
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
// #define RGBLIGHT_EFFECT_SNAKE
// #define RGBLIGHT_EFFECT_KNIGHT
// #define RGBLIGHT_EFFECT_CHRISTMAS
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
// #define RGBLIGHT_EFFECT_RGB_TEST
// #define RGBLIGHT_EFFECT_ALTERNATING
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
*/
// #define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* key combination for magic key command */
/* defined by default; to change, uncomment and set to the combination you want */
// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP H
//#define MAGIC_KEY_HELP_ALT SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER0_ALT GRAVE
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER B
//#define MAGIC_KEY_BOOTLOADER_ALT ESC
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
/*
* MIDI options
*/
/* Prevent use of disabled MIDI features in the keymap */
//#define MIDI_ENABLE_STRICT 1
/* enable basic MIDI features:
- MIDI notes can be sent when in Music mode is on
*/
//#define MIDI_BASIC
/* enable advanced MIDI features:
- MIDI notes can be added to the keymap
- Octave shift and transpose
- Virtual sustain, portamento, and modulation wheel
- etc.
*/
//#define MIDI_ADVANCED
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
/*
* HD44780 LCD Display Configuration
*/
/*
#define LCD_LINES 2 //< number of visible lines of the display
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
#if LCD_IO_MODE
#define LCD_PORT PORTB //< port for the LCD lines
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
#define LCD_RS_PORT LCD_PORT //< port for RS line
#define LCD_RS_PIN 3 //< pin for RS line
#define LCD_RW_PORT LCD_PORT //< port for RW line
#define LCD_RW_PIN 2 //< pin for RW line
#define LCD_E_PORT LCD_PORT //< port for Enable line
#define LCD_E_PIN 1 //< pin for Enable line
#endif
*/
/* Bootmagic Lite key configuration */
// #define BOOTMAGIC_LITE_ROW 0
// #define BOOTMAGIC_LITE_COLUMN 0

View file

@ -0,0 +1,97 @@
{
"keyboard_name": "quasar",
"url": "https://github.com/ai03-2725/Quasar/",
"maintainer": "ai03",
"width": 18.5,
"height": 6.75,
"layouts": {
"LAYOUT": {
"layout": [
{"label":"Esc", "x":0, "y":0},
{"label":"F1", "x":2, "y":0},
{"label":"F2", "x":3, "y":0},
{"label":"F3", "x":4, "y":0},
{"label":"F4", "x":5, "y":0},
{"label":"F5", "x":6.5, "y":0},
{"label":"F6", "x":7.5, "y":0},
{"label":"F7", "x":8.5, "y":0},
{"label":"F8", "x":9.5, "y":0},
{"label":"F9", "x":11, "y":0},
{"label":"F10", "x":12, "y":0},
{"label":"F11", "x":13, "y":0},
{"label":"F12", "x":14, "y":0},
{"label":"PrtSc", "x":15.5, "y":0},
{"label":"Scroll Lock", "x":16.5, "y":0},
{"label":"Pause", "x":17.5, "y":0},
{"label":"~", "x":0, "y":1.75},
{"label":"!", "x":1, "y":1.75},
{"label":"@", "x":2, "y":1.75},
{"label":"#", "x":3, "y":1.75},
{"label":"$", "x":4, "y":1.75},
{"label":"%", "x":5, "y":1.75},
{"label":"^", "x":6, "y":1.75},
{"label":"&", "x":7, "y":1.75},
{"label":"*", "x":8, "y":1.75},
{"label":"(", "x":9, "y":1.75},
{"label":")", "x":10, "y":1.75},
{"label":"_", "x":11, "y":1.75},
{"label":"+", "x":12, "y":1.75},
{"label":"Backspace", "x":13, "y":1.75, "w":2},
{"label":"Insert", "x":15.5, "y":1.75},
{"label":"Home", "x":16.5, "y":1.75},
{"label":"PgUp", "x":17.5, "y":1.75},
{"label":"Tab", "x":0, "y":2.75, "w":1.5},
{"label":"Q", "x":1.5, "y":2.75},
{"label":"W", "x":2.5, "y":2.75},
{"label":"E", "x":3.5, "y":2.75},
{"label":"R", "x":4.5, "y":2.75},
{"label":"T", "x":5.5, "y":2.75},
{"label":"Y", "x":6.5, "y":2.75},
{"label":"U", "x":7.5, "y":2.75},
{"label":"I", "x":8.5, "y":2.75},
{"label":"O", "x":9.5, "y":2.75},
{"label":"P", "x":10.5, "y":2.75},
{"label":"{", "x":11.5, "y":2.75},
{"label":"}", "x":12.5, "y":2.75},
{"label":"|", "x":13.5, "y":2.75, "w":1.5},
{"label":"Delete", "x":15.5, "y":2.75},
{"label":"End", "x":16.5, "y":2.75},
{"label":"PgDn", "x":17.5, "y":2.75},
{"label":"Caps Lock", "x":0, "y":3.75, "w":1.25},
{"label":"A", "x":1.75, "y":3.75},
{"label":"S", "x":2.75, "y":3.75},
{"label":"D", "x":3.75, "y":3.75},
{"label":"F", "x":4.75, "y":3.75},
{"label":"G", "x":5.75, "y":3.75},
{"label":"H", "x":6.75, "y":3.75},
{"label":"J", "x":7.75, "y":3.75},
{"label":"K", "x":8.75, "y":3.75},
{"label":"L", "x":9.75, "y":3.75},
{"label":":", "x":10.75, "y":3.75},
{"label":"\"", "x":11.75, "y":3.75},
{"label":"Enter", "x":12.75, "y":3.75, "w":2.25},
{"label":"Shift", "x":0, "y":4.75, "w":2.25},
{"label":"Z", "x":2.25, "y":4.75},
{"label":"X", "x":3.25, "y":4.75},
{"label":"C", "x":4.25, "y":4.75},
{"label":"V", "x":5.25, "y":4.75},
{"label":"B", "x":6.25, "y":4.75},
{"label":"N", "x":7.25, "y":4.75},
{"label":"M", "x":8.25, "y":4.75},
{"label":"<", "x":9.25, "y":4.75},
{"label":">", "x":10.25, "y":4.75},
{"label":"?", "x":11.25, "y":4.75},
{"label":"Shift", "x":12.25, "y":4.75, "w":2.75},
{"label":"\u2191", "x":16.5, "y":4.75},
{"label":"Ctrl", "x":0, "y":5.75, "w":1.5},
{"label":"Alt", "x":2.5, "y":5.75, "w":1.5},
{"x":4, "y":5.75, "w":7},
{"label":"Alt", "x":11, "y":5.75, "w":1.5},
{"label":"Ctrl", "x":13.5, "y":5.75, "w":1.5},
{"label":"\u2190", "x":15.5, "y":5.75},
{"label":"\u2193", "x":16.5, "y":5.75},
{"label":"\u2192", "x":17.5, "y":5.75}
]
}
}
}

View file

@ -0,0 +1,61 @@
/* Copyright 2019 Ryota Goto
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
/*
* K702, K503, K504, K604, K704, K706, K708, K609, K509, K506, K406, K411, K412, K415, K315, K114, \
* K502, K402, K403, K404, K405, K505, K507, K407, K408, K409, K410, K510, K508, K606, K512, K514, K513, \
* K602, K302, K303, K304, K305, K605, K607, K307, K308, K309, K310, K610, K608, K206, K511, K414, K413, \
* K603, K202, K203, K204, K205, K705, K707, K207, K208, K209, K210, K710, K106, \
* K601, K102, K103, K104, K105, K005, K007, K107, K108, K109, K010, K101, K714, \
* K500, K715, K006, K015, K100, K014, K011, K012 \
*/
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT( /* Base */
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS,
KC_LGUI, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
KC_LCTL, KC_LALT, KC_SPC, KC_GRV, KC_DEL, KC_LEFT, KC_DOWN, KC_RGHT
),
[1] = LAYOUT( /* FN */
RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, _______, _______, _______,
KC_CAPS, _______, KC_UP, _______, _______, _______, _______, _______, KC_PGUP, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______,
_______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_VOLU, KC_VOLD, KC_HOME, KC_PGDN, KC_END, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_PGUP,
_______, _______, _______, _______, KC_BSPC, KC_HOME, KC_PGDN, KC_END
)
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return true;
}
void matrix_init_user(void) {
}
void matrix_scan_user(void) {
}
void led_set_user(uint8_t usb_led) {
}

View file

@ -0,0 +1,3 @@
# The ai03 keymap for Quasar
Focuses functionality mainly into the 60% cluster.

View file

@ -0,0 +1,61 @@
/* Copyright 2019 Ryota Goto
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
/*
* K702, K503, K504, K604, K704, K706, K708, K609, K509, K506, K406, K411, K412, K415, K315, K114, \
* K502, K402, K403, K404, K405, K505, K507, K407, K408, K409, K410, K510, K508, K606, K512, K514, K513, \
* K602, K302, K303, K304, K305, K605, K607, K307, K308, K309, K310, K610, K608, K206, K511, K414, K413, \
* K603, K202, K203, K204, K205, K705, K707, K207, K208, K209, K210, K710, K106, \
* K601, K102, K103, K104, K105, K005, K007, K107, K108, K109, K010, K101, K714, \
* K500, K715, K006, K015, K100, K014, K011, K012 \
*/
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT( /* Base */
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS,
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
KC_LCTL, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
),
[1] = LAYOUT( /* FN */
RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______
)
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return true;
}
void matrix_init_user(void) {
}
void matrix_scan_user(void) {
}
void led_set_user(uint8_t usb_led) {
}

View file

@ -0,0 +1,4 @@
# The default keymap for Quasar
Caps lock behaves as Fn/Layer. Press caps+esc for reset, caps+tab for caps lock.
The rest is basic WKL TKL.

View file

@ -0,0 +1,51 @@
/* Copyright 2019 Ryota Goto
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "quasar.h"
// Optional override functions below.
// You can leave any or all of these undefined.
// These are only required if you want to perform custom actions.
/*
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_user();
}
void matrix_scan_kb(void) {
// put your looping keyboard code here
// runs every cycle (a lot)
matrix_scan_user();
}
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
// put your per-action keyboard code here
// runs for every action, just before processing by the firmware
return process_record_user(keycode, record);
}
void led_set_kb(uint8_t usb_led) {
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
led_set_user(usb_led);
}
*/

View file

@ -0,0 +1,45 @@
/* Copyright 2019 Ryota Goto
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
/* This a shortcut to help you visually see your layout.
*
* The first section contains all of the arguments representing the physical
* layout of the board and position of the keys.
*
* The second converts the arguments into a two-dimensional array which
* represents the switch matrix.
*/
#define LAYOUT( \
K702, K503, K504, K604, K704, K706, K708, K609, K509, K506, K406, K411, K412, K415, K315, K114, \
K502, K402, K403, K404, K405, K505, K507, K407, K408, K409, K410, K510, K508, K606, K512, K514, K513, \
K602, K302, K303, K304, K305, K605, K607, K307, K308, K309, K310, K610, K608, K206, K511, K414, K413, \
K603, K202, K203, K204, K205, K705, K707, K207, K208, K209, K210, K710, K106, \
K601, K102, K103, K104, K105, K005, K007, K107, K108, K109, K010, K101, K714, \
K500, K715, K006, K015, K100, K014, K011, K012 \
) \
{ \
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K005, K006, K007, KC_NO, KC_NO, K010, K011, K012, KC_NO, K014, K015 }, \
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, KC_NO, KC_NO, KC_NO, KC_NO, K114, KC_NO }, \
{ KC_NO, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
{ KC_NO, KC_NO, K302, K303, K304, K305, KC_NO, K307, K308, K309, K310, KC_NO, KC_NO, KC_NO, KC_NO, K315 }, \
{ KC_NO, KC_NO, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, K415 }, \
{ K500, KC_NO, K502, K503, K504, K505, K506, K507, K508, K509, K510, K511, K512, K513, K514, KC_NO }, \
{ KC_NO, K601, K602, K603, K604, K605, K606, K607, K608, K609, K610, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
{ KC_NO, KC_NO, K702, KC_NO, K704, K705, K706, K707, K708, KC_NO, K710, KC_NO, KC_NO, KC_NO, K714, K715 } \
}

View file

@ -0,0 +1,15 @@
# Quasar
![Quasar](https://i.imgur.com/XIbX2Pw.jpg)
Replacement controller for the IBM Model M Space Saving keyboard
Keyboard Maintainer: [ai03](https://github.com/ai03-2725)
Hardware Supported: The Quasar PCB
Hardware Availability: [Source available on GitHub](https://github.com/ai03-2725/Quasar/)
Make example for this keyboard (after setting up your build environment):
make ai03/quasar:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View file

@ -0,0 +1,80 @@
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# atmega32a bootloadHID
BOOTLOADER = atmel-dfu
# If you don't know the bootloader type, then you can specify the
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
# OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)