diff --git a/common/report.h b/common/report.h index 45f5c0b881..a73e0aba18 100644 --- a/common/report.h +++ b/common/report.h @@ -78,6 +78,11 @@ along with this program. If not, see . # define REPORT_KEYS 6 #endif + +#ifdef __cplusplus +extern "C" { +#endif + typedef struct { uint8_t mods; uint8_t rserved; @@ -92,4 +97,8 @@ typedef struct { int8_t h; } __attribute__ ((packed)) report_mouse_t; +#ifdef __cplusplus +} +#endif + #endif diff --git a/common/usb_keycodes.h b/common/usb_keycodes.h index 9b6cce1532..04b398fa2a 100644 --- a/common/usb_keycodes.h +++ b/common/usb_keycodes.h @@ -24,6 +24,7 @@ along with this program. If not, see . #define IS_ERROR(code) (KB_ROLL_OVER <= (code) && (code) <= KB_UNDEFINED) +#define IS_ANY(code) (KB_A <= (code)) #define IS_KEY(code) (KB_A <= (code) && (code) <= KB_EXSEL) #define IS_MOD(code) (KB_LCTRL <= (code) && (code) <= KB_RGUI) #define IS_FN(code) (KB_FN0 <= (code) && (code) <= KB_FN7) diff --git a/converter/usb_usb/Makefile b/converter/usb_usb/Makefile new file mode 100644 index 0000000000..4565ca508a --- /dev/null +++ b/converter/usb_usb/Makefile @@ -0,0 +1,131 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = usb_usb + +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# MCU name +MCU = atmega32u4 + + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) +# Interrupt driven control endpoint task +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + + +# Build Options +# comment out to disable the options. +# +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Media control and System control +CONSOLE_ENABLE = yes # Console for debug +#NKRO_ENABLE = yes # USB Nkey Rollover + +# Boot Section Size in bytes +# Teensy halfKay 512 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +#OPT_DEFS += -DBOOT_SIZE=4096 + + + +SRC = \ + keymap.c \ + matrix.c \ + led.c \ + main.cpp + +CONFIG_H = config.h + + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) +#VPATH += $(TOP_DIR)/common + + + +# program Leonardo +PROGRAM_CMD = avrdude -p$(MCU) -cavr109 -P$(DEV) -b57600 -Uflash:w:$(TARGET).hex + + + +include $(TOP_DIR)/protocol/usb_hid.mk +include $(TOP_DIR)/protocol/lufa.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk diff --git a/converter/usb_usb/config.h b/converter/usb_usb/config.h new file mode 100644 index 0000000000..c2230fb570 --- /dev/null +++ b/converter/usb_usb/config.h @@ -0,0 +1,40 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0xCAFE +#define DEVICE_VER 0x0814 +#define MANUFACTURER t.m.k. +#define PRODUCT USB to USB keyboard converter + + +#define DESCRIPTION Product from t.m.k. keyboard firmware project + + +/* matrix size */ +#define MATRIX_ROWS 32 +#define MATRIX_COLS 8 + + +/* key combination for command */ +#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT))) + +#endif diff --git a/converter/usb_usb/keymap.c b/converter/usb_usb/keymap.c new file mode 100644 index 0000000000..4061974504 --- /dev/null +++ b/converter/usb_usb/keymap.c @@ -0,0 +1,251 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include +#include "usb_keycodes.h" +#include "util.h" +#include "keymap.h" + + +#define KEYMAP( \ + K29,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41,K42,K43,K44,K45, K46,K47,K48, \ + K35,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K2D,K2E,K2A, K49,K4A,K4B, K53,K54,K55,K56, \ + K2B,K14,K1A,K08,K15,K17,K1C,K18,K0C,K12,K13,K2F,K30,K31, K4C,K4D,K4E, K5F,K60,K61, \ + K39,K04,K16,K07,K09,K0A,K0B,K0D,K0E,K0F,K33,K34, K28, K5C,K5D,K5E,K57, \ + KE1,K1D,K1B,K06,K19,K05,K11,K10,K36,K37,K38, KE5, K52, K59,K5A,K5B, \ + KE0,KE3,KE2, K2C, KE6,KE7,K65,KE4, K50,K51,K4F, K62, K63,K58 \ +) { \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_##K04, KB_##K05, KB_##K06, KB_##K07 }, /* 00-07 */ \ + { KB_##K08, KB_##K09, KB_##K0A, KB_##K0B, KB_##K0C, KB_##K0D, KB_##K0E, KB_##K0F }, /* 08-0F */ \ + { KB_##K10, KB_##K11, KB_##K12, KB_##K13, KB_##K14, KB_##K15, KB_##K16, KB_##K17 }, /* 10-17 */ \ + { KB_##K18, KB_##K19, KB_##K1A, KB_##K1B, KB_##K1C, KB_##K1D, KB_##K1E, KB_##K1F }, /* 18-1F */ \ + { KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_##K27 }, /* 20-27 */ \ + { KB_##K28, KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_##K2F }, /* 28-2F */ \ + { KB_##K30, KB_##K31, KB_NO, KB_##K33, KB_##K34, KB_##K35, KB_##K36, KB_##K37 }, /* 30-37 */ \ + { KB_##K38, KB_##K39, KB_##K3A, KB_##K3B, KB_##K3C, KB_##K3D, KB_##K3E, KB_##K3F }, /* 38-3F */ \ + { KB_##K40, KB_##K41, KB_##K42, KB_##K43, KB_##K44, KB_##K45, KB_##K46, KB_##K47 }, /* 40-47 */ \ + { KB_##K48, KB_##K49, KB_##K4A, KB_##K4B, KB_##K4C, KB_##K4D, KB_##K4E, KB_##K4F }, /* 48-4F */ \ + { KB_##K50, KB_##K51, KB_##K52, KB_##K53, KB_##K54, KB_##K55, KB_##K56, KB_##K57 }, /* 50-57 */ \ + { KB_##K58, KB_##K59, KB_##K5A, KB_##K5B, KB_##K5C, KB_##K5D, KB_##K5E, KB_##K5F }, /* 58-5F */ \ + { KB_##K60, KB_##K61, KB_##K62, KB_##K63, KB_NO, KB_##K65, KB_NO, KB_NO }, /* 60-67 */ \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, /* 68-6F */ \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, /* 70-77 */ \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, /* 78-7F */ \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, /* 80-87 */ \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, /* 88-8F */ \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, /* 90-97 */ \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, /* 98-9F */ \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, /* A0-A7 */ \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, /* A8-AF */ \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, /* B0-B7 */ \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, /* B8-BF */ \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, /* C0-C7 */ \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, /* C8-CF */ \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, /* D0-D7 */ \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, /* D8-DF */ \ + { KB_##KE0, KB_##KE1, KB_##KE2, KB_##KE3, KB_##KE4, KB_##KE5, KB_##KE6, KB_##KE7 }, /* E0-E7 */ \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, /* E8-EF */ \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, /* F0-F7 */ \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, /* F8-FF */ \ +} + + +// Layers to switch by holding Fn key(0-7) +static const uint8_t PROGMEM fn_layer[] = { 5, 6, 0, 0, 0, 0, 0, 0 }; + +// Codes to register by clicking Fn key(0-7) +static const uint8_t PROGMEM fn_keycode[] = { KB_SCLN, KB_SLSH, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }; + +static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: default + * ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,-----------. + * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|Slp|Wak| + * `---' `---------------' `---------------' `---------------' `-----------' `-----------' + * ,-----------------------------------------------------------. ,-----------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| |Ins|Hom|PgU| |NmL| /| *| -| + * |-----------------------------------------------------------| |-----------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| | + * |-----------------------------------------------------------| `-----------' |-----------| +| + * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| | + * |-----------------------------------------------------------| ,---. |---------------| + * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| | + * |-----------------------------------------------------------| ,-----------. |-----------|Ent| + * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| | 0| .| | + * `-----------------------------------------------------------' `-----------' `---------------' + * ; = Fn0(to Layer 5) + * / = Fn1(to Layer 6) + */ + KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, + CAPS,A, S, D, F, G, H, J, K, L, FN0, QUOT, ENT, P4, P5, P6, PPLS, + LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN1, RSFT, UP, P1, P2, P3, + LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT + ), + + /* 1: plain Qwerty without layer switching + * ,-----------------------------------------------------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| + * |-----------------------------------------------------------| + * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| + * `-----------------------------------------------------------' + */ + KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, + CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS, + LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, + LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT + ), + + /* 2: Colemak http://colemak.com + * ,-----------------------------------------------------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| + * |-----------------------------------------------------------| + * |Tab | Q| W| F| P| G| J| L| U| Y| ;| [| ]| \| + * |-----------------------------------------------------------| + * |BackSp| A| R| S| T| D| H| N| E| I| O| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| K| M| ,| ,| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| + * `----------------------------------------------------------' + */ + KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, + TAB, Q, W, F, P, G, J, L, U, Y, SCLN,LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, + BSPC,A, R, S, T, D, H, N, E, I, O, QUOT, ENT, P4, P5, P6, PPLS, + LSFT,Z, X, C, V, B, K, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, + LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT + ), + + /* 3: Dvorak http://en.wikipedia.org/wiki/Dvorak_Simplified_Keyboard + * ,-----------------------------------------------------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| [| ]|Backspa| + * |-----------------------------------------------------------| + * |Tab | '| ,| .| P| Y| F| G| C| R| L| /| =| \| + * |-----------------------------------------------------------| + * |BackSp| A| O| E| U| I| D| H| T| N| S| -|Return | + * |-----------------------------------------------------------| + * |Shift | ;| Q| J| K| X| B| M| Wl V| Z|Shift | + * |-----------------------------------------------------------| + * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| + * `-----------------------------------------------------------' + */ + KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, LBRC,RBRC,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, + TAB, QUOT,COMM,DOT, P, Y, F, G, C, R, L, SLSH,EQL, BSLS, DEL, END, PGDN, P7, P8, P9, + CAPS,A, O, E, U, I, D, H, T, N, S, MINS, ENT, P4, P5, P6, PPLS, + LSFT,SCLN,Q, J, K, X, B, M, W, V, Z, RSFT, UP, P1, P2, P3, + LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT + ), + + /* 4: Workman http://viralintrospection.wordpress.com/2010/09/06/a-different-philosophy-in-designing-keyboard-layouts/ + * ,-----------------------------------------------------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| + * |-----------------------------------------------------------| + * |Tab | Q| D| R| W| B| J| F| U| P| ;| [| ]| \| + * |-----------------------------------------------------------| + * |CapsLo| A| S| H| T| G| Y| N| E| O| I| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| M| C| V| K| L| ,| ,| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| + * `-----------------------------------------------------------' + */ + KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, + TAB, Q, D, R, W, B, J, F, U, P, SCLN,LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, + BSPC,A, S, H, T, G, Y, N, E, O, I, QUOT, ENT, P4, P5, P6, PPLS, + LSFT,Z, X, M, C, V, K, L, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, + LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT + ), + + /* 5: Mouse keys + * ,-----------------------------------------------------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa| + * |-----------------------------------------------------------| + * |Tab |MwL|MwU|McU|WwU|WwR|MwL|MwD|MwU|MwR| | | | \| + * |-----------------------------------------------------------| + * |CapsLo| |McL|McD|McR| |McL|McD|McU|McR|Fn0| |Return | + * |-----------------------------------------------------------| + * |Shift |VoD|VoU|Mut|Mb2|Mb3|Mb2|Mb1|VoD|VoU|Mut|Shift | + * |-----------------------------------------------------------| + * |Ctrl |Gui |Alt | Mb1 |Alt |Gui |Menu|Ctrl| + * `-----------------------------------------------------------' + * Mc = mouse cursor, Mw = mouse wheel, Mb = mouse button + * Vo = Volume, Mut = Mute + */ + KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, + TAB, WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO, NO, NO, BSLS, DEL, END, PGDN, P7, P8, P9, + CAPS,NO, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN0, NO, ENT, P4, P5, P6, PPLS, + LSFT,VOLD,VOLU,MUTE,BTN2,BTN3,BTN2,BTN1,VOLD,VOLU,MUTE, RSFT, UP, P1, P2, P3, + LCTL,LGUI,LALT, BTN1, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT + ), + + /* 6: Cursor keys + * ,-----------------------------------------------------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa| + * |-----------------------------------------------------------| + * |Tab |Hom|PgU| Up|PgU|End|Hom|PgD|PgU|End| | | | \| + * |-----------------------------------------------------------| + * |CapsLo| |Lef|Dow|Rig| |Lef|Dow| Up|Rig| | |Return | + * |-----------------------------------------------------------| + * |Shift | | | | | |Hom|PgD|PgU|End|Fn1|Shift | + * |-----------------------------------------------------------| + * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| + * `-----------------------------------------------------------' + */ + KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, + TAB, NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, NO, NO, BSLS, DEL, END, PGDN, P7, P8, P9, + CAPS,NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, P4, P5, P6, PPLS, + LSFT,VOLD,VOLU,MUTE,NO, NO, HOME,PGDN,PGUP,END, FN1, RSFT, UP, P1, P2, P3, + LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT + ), +}; + + + +uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col) +{ + return pgm_read_byte(&keymaps[(layer)][(row)][(col)]); +} + +uint8_t keymap_fn_layer(uint8_t fn_bits) +{ + return pgm_read_byte(&fn_layer[biton(fn_bits)]); +} + +uint8_t keymap_fn_keycode(uint8_t fn_bits) +{ + return pgm_read_byte(&fn_keycode[(biton(fn_bits))]); +} diff --git a/converter/usb_usb/led.c b/converter/usb_usb/led.c new file mode 100644 index 0000000000..fc0eeb0ff7 --- /dev/null +++ b/converter/usb_usb/led.c @@ -0,0 +1,24 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "stdint.h" +#include "led.h" + + +void led_set(uint8_t usb_led) +{ +} diff --git a/converter/usb_usb/main.cpp b/converter/usb_usb/main.cpp new file mode 100644 index 0000000000..00d2d59b6a --- /dev/null +++ b/converter/usb_usb/main.cpp @@ -0,0 +1,95 @@ +#include +#include +#include +#include +#include + +// USB HID host +#include "Usb.h" +#include "hid.h" +#include "hidboot.h" +#include "parser.h" + +// LUFA +#include "lufa.h" + +#include "debug.h" +#include "keyboard.h" + +#include "leonardo_led.h" + + +static USB usb_host; +static HIDBoot kbd(&usb_host); +static KBDReportParser kbd_parser; + +static void LUFA_setup(void) +{ + /* Disable watchdog if enabled by bootloader/fuses */ + MCUSR &= ~(1 << WDRF); + wdt_disable(); + + /* Disable clock division */ + clock_prescale_set(clock_div_1); + + // Leonardo needs. Without this USB device is not recognized. + USB_Disable(); + + USB_Init(); + + // for Console_Task + USB_Device_EnableSOFEvents(); +} + +static void HID_setup() +{ + if (usb_host.Init() == -1) { + debug("HID init: failed\n"); + LED_TX_OFF; + } + + _delay_ms(200); + + kbd.SetReportParser(0, (HIDReportParser*)&kbd_parser); +} + +int main(void) +{ + // LED for debug + LED_TX_INIT; + LED_TX_ON; + + print_enable = true; + debug_enable = true; + debug_matrix = true; + debug_keyboard = true; + debug_mouse = true; + + host_set_driver(&lufa_driver); + keyboard_init(); + + LUFA_setup(); + sei(); + + // wait for startup of sendchar routine + while (USB_DeviceState != DEVICE_STATE_Configured) ; + if (debug_enable) { + _delay_ms(1000); + } + + HID_setup(); + + debug("init: done\n"); + for (;;) { + keyboard_proc(); + + usb_host.Task(); + +#if !defined(INTERRUPT_CONTROL_ENDPOINT) + // LUFA Task for control request + USB_USBTask(); +#endif + } + + return 0; +} diff --git a/converter/usb_usb/matrix.c b/converter/usb_usb/matrix.c new file mode 100644 index 0000000000..1cfecde203 --- /dev/null +++ b/converter/usb_usb/matrix.c @@ -0,0 +1,133 @@ +/* +Copyright 2011 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include +#include +#include "usb_hid.h" +#include "usb_keycodes.h" +#include "util.h" +#include "print.h" +#include "debug.h" +#include "matrix.h" + +/* KEY CODE to Matrix + * + * HID keycode(1 byte): + * Higher 5 bits indicates ROW and lower 3 bits COL. + * + * 7 6 5 4 3 2 1 0 + * +---------------+ + * | ROW | COL | + * +---------------+ + * + * Matrix space(32 * 8): + * 01234567 + * 0 +--------+ + * : | | + * : | | + * 31 +--------+ + */ +#define ROW_MASK 0xF8 +#define COL_MASK 0x07 +#define CODE(row, col) (((row) << 3) | (col)) +#define ROW(code) (((code) & ROW_MASK) >> 3) +#define COL(code) ((code) & COL_MASK) +#define ROW_BITS(code) (1 << COL(code)) + + +uint8_t matrix_rows(void) { return MATRIX_ROWS; } +uint8_t matrix_cols(void) { return MATRIX_COLS; } +void matrix_init(void) {} +bool matrix_has_ghost(void) { return false; } + +static bool matrix_is_mod =false; + +uint8_t matrix_scan(void) { + static uint16_t last_time_stamp = 0; + + if (last_time_stamp != usb_hid_time_stamp) { + last_time_stamp = usb_hid_time_stamp; + matrix_is_mod = true; + } else { + matrix_is_mod = false; + } + return 1; +} + +bool matrix_is_modified(void) { + + return matrix_is_mod; +} + +bool matrix_is_on(uint8_t row, uint8_t col) { + uint8_t code = CODE(row, col); + + if (IS_MOD(code)) { + if (usb_hid_keyboard_report.mods & ROW_BITS(code)) { + return true; + } + } + for (uint8_t i = 0; i < REPORT_KEYS; i++) { + if (usb_hid_keyboard_report.keys[i] == code) { + return true; + } + } + return false; +} + +uint8_t matrix_get_row(uint8_t row) { + uint8_t row_bits = 0; + + if (IS_MOD(CODE(row, 0)) && usb_hid_keyboard_report.mods) { + row_bits |= usb_hid_keyboard_report.mods; + } + + for (uint8_t i = 0; i < REPORT_KEYS; i++) { + if (IS_ANY(usb_hid_keyboard_report.keys[i])) { + if (row == ROW(usb_hid_keyboard_report.keys[i])) { + row_bits |= ROW_BITS(usb_hid_keyboard_report.keys[i]); + } + } + } + return row_bits; +} + +uint8_t matrix_key_count(void) { + uint8_t count = 0; + + count += bitpop(usb_hid_keyboard_report.mods); + for (uint8_t i = 0; i < REPORT_KEYS; i++) { + if (IS_ANY(usb_hid_keyboard_report.keys[i])) { + count++; + } + } + return count; +} + +void matrix_print(void) { + print("\nr/c 01234567\n"); + for (uint8_t row = 0; row < matrix_rows(); row++) { + phex(row); print(": "); + pbin_reverse(matrix_get_row(row)); +#ifdef MATRIX_HAS_GHOST + if (matrix_has_ghost_in_row(row)) { + print(" + #include "parser.h" +#include "usb_hid.h" + #include "leonardo_led.h" #include "debug.h" + +report_keyboard_t usb_hid_keyboard_report; +uint16_t usb_hid_time_stamp; + + void KBDReportParser::Parse(HID *hid, bool is_rpt_id, uint8_t len, uint8_t *buf) { + ::memcpy(&usb_hid_keyboard_report, buf, sizeof(report_keyboard_t)); + usb_hid_time_stamp = millis(); + LED_TX_TOGGLE; debug("KBDReport: "); - for (uint8_t i = 0; i < len; i++) { - debug_hex(buf[i]); + debug_hex(usb_hid_keyboard_report.mods); + for (uint8_t i = 0; i < 6; i++) { debug(" "); + debug_hex(usb_hid_keyboard_report.keys[i]); } debug("\r\n"); }