1
0
Fork 0

ScrabblePad Support (#2760)

* Initial commit for donutcat's 15x15 monstrosity

* modify readmes to be more descriptive

* Add info.json to support QMK Configurator

* Update copyright and change REPLACE_WITH_YOUR_NAME to MechMerlin

* update naming convention for ScrabblePad

* remove .vscode directory as per Jack's comments
This commit is contained in:
MechMerlin 2018-04-19 08:31:50 -07:00 committed by Jack Humbert
parent 75360ebdae
commit eaa0b24335
9 changed files with 488 additions and 0 deletions

View file

@ -0,0 +1,190 @@
/*
Copyright 2018 MechMerlin
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x0000
#define DEVICE_VER 0x0001
#define MANUFACTURER Donut Cables
#define PRODUCT ScrabblePad
#define DESCRIPTION 15x15 Ortholinear Board
/* key matrix size */
#define MATRIX_ROWS 15
#define MATRIX_COLS 15
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { D3, F1, C7, F2, C6, F3, C5, F4, C4, F5, C3, F6, C2, F7, C1 }
#define MATRIX_COL_PINS { D4, D5, D7, B7, D0, D1, D2, C0, F0, B4, B5, B6, E1, E7, E0 }
#define UNUSED_PINS
/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
#define DIODE_DIRECTION COL2ROW
// #define BACKLIGHT_PIN B7
// #define BACKLIGHT_BREATHING
// #define BACKLIGHT_LEVELS 3
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
*/
// #define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* key combination for magic key command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1 H
//#define MAGIC_KEY_HELP2 SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0_ALT1 ESC
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER PAUSE
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
/*
* MIDI options
*/
/* Prevent use of disabled MIDI features in the keymap */
//#define MIDI_ENABLE_STRICT 1
/* enable basic MIDI features:
- MIDI notes can be sent when in Music mode is on
*/
//#define MIDI_BASIC
/* enable advanced MIDI features:
- MIDI notes can be added to the keymap
- Octave shift and transpose
- Virtual sustain, portamento, and modulation wheel
- etc.
*/
//#define MIDI_ADVANCED
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
#endif

View file

@ -0,0 +1,12 @@
{
"keyboard_name": "scrabblepad",
"url": "",
"maintainer": "qmk",
"width": 15,
"height": 15,
"layouts": {
"LAYOUT": {
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":13, "y":2}, {"x":14, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":7, "y":4}, {"x":8, "y":4}, {"x":9, "y":4}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":0, "y":5}, {"x":1, "y":5}, {"x":2, "y":5}, {"x":3, "y":5}, {"x":4, "y":5}, {"x":5, "y":5}, {"x":6, "y":5}, {"x":7, "y":5}, {"x":8, "y":5}, {"x":9, "y":5}, {"x":10, "y":5}, {"x":11, "y":5}, {"x":12, "y":5}, {"x":13, "y":5}, {"x":14, "y":5}, {"x":0, "y":6}, {"x":1, "y":6}, {"x":2, "y":6}, {"x":3, "y":6}, {"x":4, "y":6}, {"x":5, "y":6}, {"x":6, "y":6}, {"x":7, "y":6}, {"x":8, "y":6}, {"x":9, "y":6}, {"x":10, "y":6}, {"x":11, "y":6}, {"x":12, "y":6}, {"x":13, "y":6}, {"x":14, "y":6}, {"x":0, "y":7}, {"x":1, "y":7}, {"x":2, "y":7}, {"x":3, "y":7}, {"x":4, "y":7}, {"x":5, "y":7}, {"x":6, "y":7}, {"x":7, "y":7}, {"x":8, "y":7}, {"x":9, "y":7}, {"x":10, "y":7}, {"x":11, "y":7}, {"x":12, "y":7}, {"x":13, "y":7}, {"x":14, "y":7}, {"x":0, "y":8}, {"x":1, "y":8}, {"x":2, "y":8}, {"x":3, "y":8}, {"x":4, "y":8}, {"x":5, "y":8}, {"x":6, "y":8}, {"x":7, "y":8}, {"x":8, "y":8}, {"x":9, "y":8}, {"x":10, "y":8}, {"x":11, "y":8}, {"x":12, "y":8}, {"x":13, "y":8}, {"x":14, "y":8}, {"x":0, "y":9}, {"x":1, "y":9}, {"x":2, "y":9}, {"x":3, "y":9}, {"x":4, "y":9}, {"x":5, "y":9}, {"x":6, "y":9}, {"x":7, "y":9}, {"x":8, "y":9}, {"x":9, "y":9}, {"x":10, "y":9}, {"x":11, "y":9}, {"x":12, "y":9}, {"x":13, "y":9}, {"x":14, "y":9}, {"x":0, "y":10}, {"x":1, "y":10}, {"x":2, "y":10}, {"x":3, "y":10}, {"x":4, "y":10}, {"x":5, "y":10}, {"x":6, "y":10}, {"x":7, "y":10}, {"x":8, "y":10}, {"x":9, "y":10}, {"x":10, "y":10}, {"x":11, "y":10}, {"x":12, "y":10}, {"x":13, "y":10}, {"x":14, "y":10}, {"x":0, "y":11}, {"x":1, "y":11}, {"x":2, "y":11}, {"x":3, "y":11}, {"x":4, "y":11}, {"x":5, "y":11}, {"x":6, "y":11}, {"x":7, "y":11}, {"x":8, "y":11}, {"x":9, "y":11}, {"x":10, "y":11}, {"x":11, "y":11}, {"x":12, "y":11}, {"x":13, "y":11}, {"x":14, "y":11}, {"x":0, "y":12}, {"x":1, "y":12}, {"x":2, "y":12}, {"x":3, "y":12}, {"x":4, "y":12}, {"x":5, "y":12}, {"x":6, "y":12}, {"x":7, "y":12}, {"x":8, "y":12}, {"x":9, "y":12}, {"x":10, "y":12}, {"x":11, "y":12}, {"x":12, "y":12}, {"x":13, "y":12}, {"x":14, "y":12}, {"x":0, "y":13}, {"x":1, "y":13}, {"x":2, "y":13}, {"x":3, "y":13}, {"x":4, "y":13}, {"x":5, "y":13}, {"x":6, "y":13}, {"x":7, "y":13}, {"x":8, "y":13}, {"x":9, "y":13}, {"x":10, "y":13}, {"x":11, "y":13}, {"x":12, "y":13}, {"x":13, "y":13}, {"x":14, "y":13}, {"x":0, "y":14}, {"x":1, "y":14}, {"x":2, "y":14}, {"x":3, "y":14}, {"x":4, "y":14}, {"x":5, "y":14}, {"x":6, "y":14}, {"x":7, "y":14}, {"x":8, "y":14}, {"x":9, "y":14}, {"x":10, "y":14}, {"x":11, "y":14}, {"x":12, "y":14}, {"x":13, "y":14}, {"x":14, "y":14}]
}
}
}

View file

@ -0,0 +1,24 @@
/* Copyright 2018 MechMerlin
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "config_common.h"
// place overrides here
#endif

View file

@ -0,0 +1,72 @@
/* Copyright 2018 MechMerlin
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "scrabblepad.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT( /* Base */
KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC \
),
};
const uint16_t PROGMEM fn_actions[] = {
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
switch(id) {
case 0:
if (record->event.pressed) {
register_code(KC_RSFT);
} else {
unregister_code(KC_RSFT);
}
break;
}
return MACRO_NONE;
};
void matrix_init_user(void) {
}
void matrix_scan_user(void) {
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return true;
}
void led_set_user(uint8_t usb_led) {
}

View file

@ -0,0 +1,6 @@
# The default keymap for ScrabblePad
This is the default keymap for the ScrabblePad.
On each row, each key is used to spell out each character in
the following string: "donutcat rules ".

View file

@ -0,0 +1,17 @@
# ScrabblePad
The ScrabblePad is a 15x15 ortholinear keyboard designed for use with
the XDA Scrabble Board sold by [Novelkeys](https://novelkeys.xyz).
It uses a [Teensy++ 2.0](https://www.pjrc.com/store/teensypp.html)
featuring an at90usb1286 8 bit microcontroller.
Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
Hardware Supported: Teensy++ 2.0 and ScrabblePad PCB
Hardware Availability: [Donut Cables](https://donutcables.com/)
Make example for this keyboard (after setting up your build environment):
make scrabblepad:default
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

View file

@ -0,0 +1,67 @@
# MCU name
MCU = at90usb1286
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches

View file

@ -0,0 +1,43 @@
/* Copyright 2018 MechMerlin
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "scrabblepad.h"
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_user();
}
void matrix_scan_kb(void) {
// put your looping keyboard code here
// runs every cycle (a lot)
matrix_scan_user();
}
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
// put your per-action keyboard code here
// runs for every action, just before processing by the firmware
return process_record_user(keycode, record);
}
void led_set_kb(uint8_t usb_led) {
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
led_set_user(usb_led);
}

View file

@ -0,0 +1,57 @@
/* Copyright 2018 MechMerlin
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef SCRABBLEPAD_H
#define SCRABBLEPAD_H
#include "quantum.h"
// Written in the format K(row)(column) where numbering is in hexadecimal
#define LAYOUT( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \
k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, \
k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k5A, k5B, k5C, k5D, k5E, \
k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6A, k6B, k6C, k6D, k6E, \
k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7A, k7B, k7C, k7D, k7E, \
k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8A, k8B, k8C, k8D, k8E, \
k90, k91, k92, k93, k94, k95, k96, k97, k98, k99, k9A, k9B, k9C, k9D, k9E, \
kA0, kA1, kA2, kA3, kA4, kA5, kA6, kA7, kA8, kA9, kAA, kAB, kAC, kAD, kAE, \
kB0, kB1, kB2, kB3, kB4, kB5, kB6, kB7, kB8, kB9, kBA, kBB, kBC, kBD, kBE, \
kC0, kC1, kC2, kC3, kC4, kC5, kC6, kC7, kC8, kC9, kCA, kCB, kCC, kCD, kCE, \
kD0, kD1, kD2, kD3, kD4, kD5, kD6, kD7, kD8, kD9, kDA, kDB, kDC, kDD, kDE, \
kE0, kE1, kE2, kE3, kE4, kE5, kE6, kE7, kE8, kE9, kEA, kEB, kEC, kED, kEE \
) \
{ \
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, }, \
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, }, \
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, }, \
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, }, \
{ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, }, \
{ k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k5A, k5B, k5C, k5D, k5E, }, \
{ k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6A, k6B, k6C, k6D, k6E, }, \
{ k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7A, k7B, k7C, k7D, k7E, }, \
{ k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8A, k8B, k8C, k8D, k8E, }, \
{ k90, k91, k92, k93, k94, k95, k96, k97, k98, k99, k9A, k9B, k9C, k9D, k9E, }, \
{ kA0, kA1, kA2, kA3, kA4, kA5, kA6, kA7, kA8, kA9, kAA, kAB, kAC, kAD, kAE, }, \
{ kB0, kB1, kB2, kB3, kB4, kB5, kB6, kB7, kB8, kB9, kBA, kBB, kBC, kBD, kBE, }, \
{ kC0, kC1, kC2, kC3, kC4, kC5, kC6, kC7, kC8, kC9, kCA, kCB, kCC, kCD, kCE, }, \
{ kD0, kD1, kD2, kD3, kD4, kD5, kD6, kD7, kD8, kD9, kDA, kDB, kDC, kDD, kDE, }, \
{ kE0, kE1, kE2, kE3, kE4, kE5, kE6, kE7, kE8, kE9, kEA, kEB, kEC, kED, kEE } \
}
#endif