Keyboard: Add YMD96 instructions for Linux + Backlight Fixes (#3908)

* Add flashing instructions for Linux

* Make device/manufacturer name consistent for ymd96

* Disable command mode by default for YMD96

* Add function call to fix backlight for YMD96

* Add personal YMD96 config

* Replace include with QMK macro

* Move KEYMAP macro to keymap-level folder

* Move custom KEYMAP macro to global LAYOUT_iso macro

* Change transparent keymappings to global definition

* Remove unecessary import and change to pragma once

 - (instead of repeated ifdef)

* Remove global keymap/layout definition

keyboards/ymd96/README.md

@@ -31,17 +31,23 @@ This firmware was modified from [ps2avrGB](https://github.com/qmk/qmk_firmware/t
 
 ## Installing and Building
 
-Since the YMD96 uses an ATmega32a chip instead of the 32u4, you need to download [HIDBootFlash v.1.0](http://vusb.wikidot.com/project:hidbootflash) for Windows. If anyone knows of a Linux/Mac bootflasher that works, edit this readme!  
+Since the YMD96 uses an ATmega32a chip instead of the 32u4, you need to download [HIDBootFlash v.1.0](http://vusb.wikidot.com/project:hidbootflash) for Windows. For Linux you can use the [bootloadHID](https://www.obdev.at/products/vusb/bootloadhid.html) utility (which will require building). Arch Linux users can alternatively install this from the [AUR](https://aur.archlinux.org/packages/bootloadhid/).
 On Windows, I use [MINGw](http://www.mingw.org/) to compile the keymaps. On Linux, you can simply use the terminal. 
 
 Once you have those two pieces of software:
-Build the keyboard with  
+Build the keyboard by navigating to the root folder of the QMK repo and running
 ```
-$ make ymd96-default  
+$ make ymd96:default  
 ```  
 If you make your own layout, change the `default` word to whatever your layout is.  
 
-And flash the compiled hex file with `HIDBootFlash`. Simply put the board in flashing mode by plugging it in while holding control, and click `find device`. Then you can specify the .hex file and flash it to the device. 
+To flash the compiled hex file, simply put the board in flashing mode by plugging it in while holding control. 
+In `HIDBootFlash` first click `find device`, then you can specify the .hex file and flash it to the device. 
+For `bootloadHID`, from a terminal that is in the same folder as your firmware file, run
+```
+$ sudo bootloadHID ymd96_default.hex
+```
+Again replacing default with your custom keymap name if required.
 
 ## Troubleshooting
 

keyboards/ymd96/config.h

@@ -23,7 +23,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define VENDOR_ID       0x20A0
 #define PRODUCT_ID      0x422D
-// TODO: share these strings with usbconfig.h
 // Edit usbconfig.h to change these.
 #define MANUFACTURER    ymdkey
 #define PRODUCT         ymd96

keyboards/ymd96/keymaps/AnthonyWharton/README.md

@@ -0,0 +1,16 @@
+# Personal Config by @AnthonyWharton
+
+The keymap and layout macro's in the main repository are for the following
+keyboard:
+
+![@AnthonyWharton's YMD96](https://i.imgur.com/uhKmkBz.jpg)
+
+**Note:** This setup has locking Caps Lock and Num Lock keys, so if you wish
+to use this layout and do not have such keys, you should :
+
+ - Change the keys `KC_LCAP` and `KC_LNUM` to `KC_CAPS`  and `KC_NUMLOCK` 
+   respectively.
+ - Remove the `LOCKING_SUPPORT_ENABLE` and `LOCKING_RESYNC_ENABLE` lines
+   from `config.h`.
+
+For any other questions, find my latest contact information on my github page.

keyboards/ymd96/keymaps/AnthonyWharton/config.h

@@ -0,0 +1,63 @@
+/*
+Base Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+Modified 2017 Andrew Novak <ndrw.nvk@gmail.com>
+Modified 2018 Anthony Wharton <th3ant@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define VENDOR_ID       0x20A0
+#define PRODUCT_ID      0x422D
+// Edit usbconfig.h to change these.
+#define MANUFACTURER    ymdkey
+#define PRODUCT         ymd96
+
+/* Matrix Size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 15
+#define DIODE_DIRECTION COL2ROW
+
+/* Required for MX Locks installed */
+#define LOCKING_SUPPORT_ENABLE
+#define LOCKING_RESYNC_ENABLE
+
+#define PREVENT_STUCK_MODIFIERS
+#define TAPPING_TOGGLE 3
+#define NO_UART 1
+
+#define BACKLIGHT_LEVELS 12
+
+/* RGB Underglow  */
+// The RGB_DI_PING value seems to be shared between all PS2AVRGB boards.
+// The same pin is used on the JJ40, at least.
+#define RGBLED_NUM 18
+#define RGB_DI_PIN E2 // NOTE: for PS2AVRGB boards, underglow commands are send
+                      //       via I2C to 0xB0
+
+#define RGBLIGHT_ANIMATIONS
+
+#define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1.0-2.7
+#define RGBLIGHT_EFFECT_BREATHE_MAX 255     // 1-255
+#define RGBLIGHT_EFFECT_SNAKE_LENGTH 7
+#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 3
+#define RGBLIGHT_EFFECT_KNIGHT_OFFSET 0
+#define RGBLIGHT_EFFECT_KNIGHT_LED_NUM RGBLED_NUM
+#define RGBLIGHT_EFFECT_CHRISTMAS_STEP 1
+#define RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL 500
+
+/* key combination for command */
+#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+

keyboards/ymd96/keymaps/AnthonyWharton/keymap.c

@@ -0,0 +1,47 @@
+/*
+Base Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+Modified 2017 Andrew Novak <ndrw.nvk@gmail.com>
+Modified 2018 Anthony Wharton <th3ant@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public LicensezZZ
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+#define _DEFLT 0
+#define _RAISE 1
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	
+	/* Layer 0, default layer */	
+	[_DEFLT] = LAYOUT_iso(
+		KC_ESC,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_HOME, KC_END,  KC_INS,  KC_DEL,  KC_PGUP, \
+		KC_GRV,   KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,      KC_BSPC,      KC_LNUM, KC_PSLS, KC_PAST, KC_PGDN, \
+		KC_TAB,   KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,       KC_ENT,     KC_P7,   KC_P8,   KC_P9,   KC_PMNS, \
+		KC_LCAP,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS,                   KC_P4,   KC_P5,   KC_P6,   KC_PPLS, \
+		KC_LSFT,  KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,       KC_RSFT,    KC_UP,   KC_P1,   KC_P2,   KC_P3,   KC_PENT, \
+		KC_LCTL,  KC_LGUI, KC_LALT,                              KC_SPC,                        MO(_RAISE),      KC_RCTL,     KC_LEFT, KC_DOWN, KC_RGHT, KC_P0,   KC_PDOT           \
+	),
+
+	/* Layer 1, raise layer */ 
+	[_RAISE] = LAYOUT_iso(
+		_______,  KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_F17,  KC_F18,  KC_F19,  KC_F20,  KC_F21,  KC_F22,  KC_F23,   KC_F24,  _______, KC_PAUS, KC_SLCK, _______, _______, _______,  \
+		_______,  RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW,RGB_M_SN,RGB_M_K, RGB_M_X, RGB_M_G, BL_OFF,  BL_ON,   BL_DEC,   BL_INC,       _______,     _______, _______, _______, _______,  \
+		_______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAD,  RGB_VAI,      KC_MUTE,     _______, KC_VOLU, _______, _______,  \
+		_______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG,  BL_TOGG,                   KC_MPRV, KC_MPLY, KC_MNXT, _______,  \
+		_______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,       _______,     KC_PGUP, _______, KC_VOLD, _______, KC_LOCK,  \
+		_______,  _______, KC_RALT,                               _______,                           _______,      _______,    KC_HOME, KC_PGDN, KC_END,  _______, _______            \
+	)
+};

keyboards/ymd96/matrix.c

@@ -50,20 +50,8 @@ void matrix_init(void) {
         matrix[row] = 0x00;
         matrix_debouncing[row] = 0x00;
     }
-/*}
 
     matrix_init_quantum();  // missing from original port by Luiz
-void matrix_set_row_status(uint8_t row) {
-    DDRB = (1 << row);
-    PORTB = ~(1 << row);
-}*/
-
-
-/*uint8_t bit_reverse(uint8_t x) {
-    x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa);
-    x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc);
-    x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0);
-    return x;*/
 }
 
 uint8_t matrix_scan(void) {

keyboards/ymd96/rules.mk

@@ -35,7 +35,7 @@ BOOTMAGIC_ENABLE = no
 MOUSEKEY_ENABLE = no
 EXTRAKEY_ENABLE = yes
 CONSOLE_ENABLE = no
-COMMAND_ENABLE = yes
+COMMAND_ENABLE = no
 
 BACKLIGHT_ENABLE = yes
 BACKLIGHT_CUSTOM_DRIVER = yes

keyboards/ymd96/usbconfig.h

@@ -242,8 +242,8 @@ section at the end of this file).
 #define USB_CFG_DEVICE_VERSION  0x00, 0x02
 /* Version number of the device: Minor number first, then major number.
  */
-#define USB_CFG_VENDOR_NAME     'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
+#define USB_CFG_VENDOR_NAME     'y','m','d','k','e','y'
-#define USB_CFG_VENDOR_NAME_LEN 13
+#define USB_CFG_VENDOR_NAME_LEN 6
 /* These two values define the vendor name returned by the USB device. The name
  * must be given as a list of characters under single quotes. The characters
  * are interpreted as Unicode (UTF-16) entities.
@@ -252,8 +252,8 @@ section at the end of this file).
  * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
  * details.
  */
-#define USB_CFG_DEVICE_NAME     'p', 's', '2', 'a', 'v', 'r', 'G', 'B'
+#define USB_CFG_DEVICE_NAME     'y','m','d','9','6'
-#define USB_CFG_DEVICE_NAME_LEN 8
+#define USB_CFG_DEVICE_NAME_LEN 5
 /* Same as above for the device name. If you don't want a device name, undefine
  * the macros. See the file USB-IDs-for-free.txt before you assign a name if
  * you use a shared VID/PID.

keyboards/ymd96/ymd96.h

@@ -76,5 +76,22 @@ K411, K410, K409, K408, K404, K405, K406, K407, K403, K402, K401, K400  \
 {      K400,       K401,       K402,       K403,       K404,       K405,       K406,       K407,       K408,       K409,       K410,       K411 },  \
 }
 
+#define LAYOUT_iso( \
+	K0500, K0502, K0503, K0504, K0505, K0600, K0610, K0710, K0700, K0511, K0512, K0513, K0514, K0113, K0214, K0013, K0706, K0709, K0708, \
+	K0400, K0401, K0402, K0403, K0404, K0405, K0601, K0611, K0711, K0701, K0410, K0411, K0412,     K0414,    K0406, K0407, K0408, K0409, \
+	  K0300,  K0301, K0302, K0303, K0304, K0305, K0602, K0612, K0712, K0702, K0310, K0311, K0312,   K0213,   K0306, K0307, K0308, K0309, \
+	    K0200,   K0201, K0202, K0203, K0204, K0205, K0603, K0613, K0713, K0703, K0210, K0211, K0212,         K0206, K0207, K0208, K0209, \
+	  K0100,  K0003, K0101, K0102, K0103, K0104, K0105, K0604, K0614, K0714, K0704, K0110,   K0111,   K0608, K0106, K0107, K0108, K0009, \
+	  K0000,  K0001,  K0002,                 K0605,                          K0705,   K0011,   K0606, K0607, K0609, K0006, K0008         \
+) { \
+	{ K0000, K0001, K0002, K0003, KC_NO, KC_NO, K0006, KC_NO, K0008, K0009, KC_NO, K0011, KC_NO, K0013, KC_NO, }, \
+	{ K0100, K0101, K0102, K0103, K0104, K0105, K0106, K0107, K0108, KC_NO, K0110, K0111, KC_NO, K0113, KC_NO, }, \
+	{ K0200, K0201, K0202, K0203, K0204, K0205, K0206, K0207, K0208, K0209, K0210, K0211, K0212, K0213, K0214, }, \
+	{ K0300, K0301, K0302, K0303, K0304, K0305, K0306, K0307, K0308, K0309, K0310, K0311, K0312, KC_NO, KC_NO, }, \
+	{ K0400, K0401, K0402, K0403, K0404, K0405, K0406, K0407, K0408, K0409, K0410, K0411, K0412, KC_NO, K0414, }, \
+	{ K0500, KC_NO, K0502, K0503, K0504, K0505, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K0511, K0512, K0513, K0514, }, \
+	{ K0600, K0601, K0602, K0603, K0604, K0605, K0606, K0607, K0608, K0609, K0610, K0611, K0612, K0613, K0614, }, \
+	{ K0700, K0701, K0702, K0703, K0704, K0705, K0706, KC_NO, K0708, K0709, K0710, K0711, K0712, K0713, K0714  }  \
+}
 
 #endif