[Keyboard] LFKPad refactor (#8079)

keyboards/lfkeyboards/lfkpad/config.h

@@ -15,31 +15,56 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
+#pragma once
-#define CONFIG_H
 
 #include "config_common.h"
 
+/* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x6060
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    LFKeyboards
 #define PRODUCT         LFKPad 21
-#define DESCRIPTION     QMK keyboard firmware for LFKPad LFK_REV_STRING
+#define DESCRIPTION     QMK keyboard firmware for LFKPad
 
-#define DIODE_DIRECTION COL2ROW
+/* key matrix size */
 #define MATRIX_ROWS 6
 #define MATRIX_COLS 4
-#define MATRIX_ROW_PINS { D5, F4, F6, F7, C7, C6}
+
-#define MATRIX_COL_PINS { F1, F0, D4, D6}
+/*
-#define UNUSED_PINS { }
+ * Keyboard Matrix Assignments
-#define RGBLED_NUM 28     // Number of LEDs
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { D5, F4, F6, F7, C7, C6 }
+#define MATRIX_COL_PINS { F1, F0, D4, D6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+//#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
 
 #define RGB_DI_PIN C7  // Have to set it to something to get the ws2812 code to compile
-#define RGBLIGHT_ANIMATIONS
+#ifdef RGB_DI_PIN
-#define RGBLIGHT_HUE_STEP 10
+#    define RGBLED_NUM 28
-#define RGBLIGHT_SAT_STEP 17
+#    define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_VAL_STEP 17
+#    define RGBLIGHT_SAT_STEP 17
+#    define RGBLIGHT_VAL_STEP 17
+#    define RGBLIGHT_ANIMATIONS
+#endif
 
 #define TAPPING_TERM 200
 
@@ -49,13 +74,16 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* define if matrix has ghost (lacks anti-ghosting diodes) */
 //#define MATRIX_HAS_GHOST
 
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
 /*
  * Force NKRO
  *
@@ -89,6 +117,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -98,8 +130,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP           H
-//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_HELP_ALT       SLASH
 //#define MAGIC_KEY_DEBUG          D
 //#define MAGIC_KEY_DEBUG_MATRIX   X
 //#define MAGIC_KEY_DEBUG_KBD      K
@@ -107,9 +139,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define MAGIC_KEY_VERSION        V
 //#define MAGIC_KEY_STATUS         S
 //#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
 //#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
 //#define MAGIC_KEY_LAYER1         1
 //#define MAGIC_KEY_LAYER2         2
 //#define MAGIC_KEY_LAYER3         3
@@ -119,9 +150,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define MAGIC_KEY_LAYER7         7
 //#define MAGIC_KEY_LAYER8         8
 //#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
 //#define MAGIC_KEY_LOCK           CAPS
 //#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
 //#define MAGIC_KEY_NKRO           N
 //#define MAGIC_KEY_SLEEP_LED      Z
 
@@ -140,7 +173,63 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
 
+/* disable these deprecated features by default */
+#ifndef LINK_TIME_OPTIMIZATION_ENABLE
+  #define NO_ACTION_MACRO
+  #define NO_ACTION_FUNCTION
 #endif
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/lfkeyboards/lfkpad/info.json

@@ -6,7 +6,29 @@
     "height": 6,
     "layouts": {
         "LAYOUT_numpad_6x4": {
-      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"Tab", "x":1, "y":0}, {"label":"=", "x":2, "y":0}, {"label":"Fn", "x":3, "y":0}, {"label":"Num Lock", "x":0, "y":1}, {"label":"/", "x":1, "y":1}, {"label":"*", "x":2, "y":1}, {"label":"-", "x":3, "y":1}, {"label":"7", "x":0, "y":2}, {"label":"8", "x":1, "y":2}, {"label":"9", "x":2, "y":2}, {"label":"4", "x":0, "y":3}, {"label":"5", "x":1, "y":3}, {"label":"6", "x":2, "y":3}, {"label":"+", "x":3, "y":2, "h":2}, {"label":"1", "x":0, "y":4}, {"label":"2", "x":1, "y":4}, {"label":"3", "x":2, "y":4}, {"label":"0", "x":0, "y":5, "w":2}, {"label":".", "x":2, "y":5}, {"label":"Enter", "x":3, "y":4, "h":2}]
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":0, "y":1},
+                {"x":1, "y":1},
+                {"x":2, "y":1},
+                {"x":3, "y":1},
+                {"x":0, "y":2},
+                {"x":1, "y":2},
+                {"x":2, "y":2},
+                {"x":0, "y":3},
+                {"x":1, "y":3},
+                {"x":2, "y":3},
+                {"x":3, "y":2, "h":2},
+                {"x":0, "y":4},
+                {"x":1, "y":4},
+                {"x":2, "y":4},
+                {"x":0, "y":5, "w":2},
+                {"x":2, "y":5},
+                {"x":3, "y":4, "h":2}
+            ]
         }
     }
 }

keyboards/lfkeyboards/lfkpad/keymaps/default/config.h

@@ -1,3 +0,0 @@
-#pragma once
-
-// place overrides here

keyboards/lfkeyboards/lfkpad/keymaps/default/keymap.c

@@ -1,41 +1,31 @@
 #include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [0] = LAYOUT_numpad_6x4( /* Base */
+    /* Base */
-    KC_ESC,   KC_TAB,   KC_PEQL,  MO(1),   \
+    [0] = LAYOUT_numpad_6x4(
-    KC_LNUM,  KC_PSLS,  KC_PAST,  KC_PMNS, \
+        KC_ESC,  KC_TAB,  KC_PEQL, MO(1),
-    KC_P7,    KC_P8,    KC_P9,             \
+        KC_LNUM, KC_PSLS, KC_PAST, KC_PMNS,
-    KC_P4,    KC_P5,    KC_P6,    KC_PPLS, \
+        KC_P7,   KC_P8,   KC_P9,
-    KC_P1,    KC_P2,    KC_P3,             \
+        KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
-      KC_P0,            KC_PDOT,  KC_PENT  \
+        KC_P1,   KC_P2,   KC_P3,
+            KC_P0,        KC_PDOT, KC_PENT
     ),
 
-  [1] = LAYOUT_numpad_6x4( /* RGB */
+    /* RGB */
-    RGB_SAI,  RGB_VAI,  RGB_HUI,  _______,  \
+    [1] = LAYOUT_numpad_6x4(
-    RGB_SAD,  RGB_VAD,  RGB_HUD,  _______,  \
+        RGB_SAI, RGB_VAI, RGB_HUI, _______,
-    RGB_M_X,  RGB_M_G,  RGB_MOD,            \
+        RGB_SAD, RGB_VAD, RGB_HUD, _______,
-    RGB_M_SW, RGB_M_SN, RGB_M_K,  RGB_RMOD, \
+        RGB_M_X, RGB_M_G, RGB_MOD,
-    RGB_M_P,  RGB_M_B,  RGB_M_R,            \
+        RGB_M_SW,RGB_M_SN,RGB_M_K, RGB_RMOD,
-      XXXXXXX,          XXXXXXX,  RGB_TOG   \
+        RGB_M_P, RGB_M_B, RGB_M_R,
-  ),
+            XXXXXXX,      XXXXXXX, RGB_TOG
+    )
 };
 
 void matrix_init_user(void) {
     // This keymap only has a single base layer, so reset the default if needed
-    if(eeconfig_read_default_layer() > 1){
+    if (eeconfig_read_default_layer() > 1) {
         eeconfig_update_default_layer(1);
         default_layer_set(1);
     }
 }
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/lfkeyboards/lfkpad/keymaps/default/readme.md

@@ -1 +1 @@
-# The default keymap LFKPad 21
+# The default keymap for the LFKPad 21

keyboards/lfkeyboards/lfkpad/lfkpad.c

@@ -1,112 +1,117 @@
-#include <avr/sfr_defs.h>
+#include "lfkpad.h"
+
+#include "quantum.h"
+
 #include <avr/timer_avr.h>
 #include <avr/wdt.h>
-#include "lfkpad.h"
-#include "keymap.h"
 #include "issi.h"
 #include "TWIlib.h"
 #include "lighting.h"
-#include "debug.h"
-#include "quantum.h"
 
 uint16_t click_hz = CLICK_HZ;
 uint16_t click_time = CLICK_MS;
 uint8_t click_toggle = CLICK_ENABLED;
 
-
+void matrix_init_kb(void) {
-void matrix_init_kb(void)
-{
     matrix_init_user();
+
 #ifndef AUDIO_ENABLE
     // If we're not using the audio pin, drive it low
-    sbi(DDRC, 6);
+    setPinOutput(C6);
-    cbi(PORTC, 6);
+    writePinLow(C6);
 #endif
 
 #ifdef ISSI_ENABLE
     issi_init();
 #endif
+
 #ifdef WATCHDOG_ENABLE
     // This is done after turning the layer LED red, if we're caught in a loop
     // we should get a flashing red light
     wdt_enable(WDTO_500MS);
 #endif
-
 }
 
-void matrix_scan_kb(void)
+void matrix_scan_kb(void) {
-{
 #ifdef WATCHDOG_ENABLE
     wdt_reset();
 #endif
+
 #ifdef ISSI_ENABLE
     // switch/underglow lighting update
     static uint32_t issi_device = 0;
     static uint32_t twi_last_ready = 0;
-    if(twi_last_ready > 1000){
+
-        // Its been way too long since the last ISSI update, reset the I2C bus and start again
+    if (twi_last_ready > 1000) {
+        // It's been way too long since the last ISSI update, reset the I2C bus and start again
         dprintf("TWI failed to recover, TWI re-init\n");
         twi_last_ready = 0;
         TWIInit();
         force_issi_refresh();
     }
-    if(isTWIReady()){
+
+    if (isTWIReady()) {
         twi_last_ready = 0;
         // If the i2c bus is available, kick off the issi update, alternate between devices
         update_issi(issi_device, issi_device);
-        if(issi_device){
+
+        if (issi_device) {
             issi_device = 0;
-        }else{
+        } else {
             issi_device = 3;
         }
-    }else{
+    } else {
         twi_last_ready++;
     }
 #endif
+
     matrix_scan_user();
 }
 
-void click(uint16_t freq, uint16_t duration){
+void click(uint16_t freq, uint16_t duration) {
 #ifdef AUDIO_ENABLE
-    if(freq >= 100 && freq <= 20000 && duration < 100){
+    if (freq >= 100 && freq <= 20000 && duration < 100) {
         play_note(freq, 10);
-        for (uint16_t i = 0; i < duration; i++){
+
+        for (uint16_t i = 0; i < duration; i++) {
             _delay_ms(1);
         }
+
         stop_all_notes();
     }
 #endif
 }
 
-bool process_record_kb(uint16_t keycode, keyrecord_t* record)
+bool process_record_kb(uint16_t keycode, keyrecord_t* record) {
-{
+    if (click_toggle && record->event.pressed) {
-    if (click_toggle && record->event.pressed){
         click(click_hz, click_time);
     }
+
     if (keycode == RESET) {
         reset_keyboard_kb();
-    } else {
     }
+
     return process_record_user(keycode, record);
 }
 
-void action_function(keyrecord_t *event, uint8_t id, uint8_t opt)
+void action_function(keyrecord_t *event, uint8_t id, uint8_t opt) {
-{
 #ifdef AUDIO_ENABLE
     int8_t sign = 1;
 #endif
-    if(id == LFK_ESC_TILDE){
+
+    if (id == LFK_ESC_TILDE) {
         // Send ~ on shift-esc
         void (*method)(uint8_t) = (event->event.pressed) ? &add_key : &del_key;
-        uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT));
+        uint8_t shifted = get_mods() & MOD_MASK_SHIFT;
-        if(layer_state == 0){
+
+        if (layer_state == 0) {
             method(shifted ? KC_GRAVE : KC_ESCAPE);
-        }else{
+        } else {
             method(shifted ? KC_ESCAPE : KC_GRAVE);
         }
         send_keyboard_report();
-    }else if(event->event.pressed){
+    } else if (event->event.pressed) {
-        switch(id){
+        switch (id) {
             case LFK_SET_DEFAULT_LAYER:
                 // set/save the current base layer to eeprom, falls through to LFK_CLEAR
                 eeconfig_update_default_layer(1UL << opt);
@@ -123,11 +128,11 @@ void action_function(keyrecord_t *event, uint8_t id, uint8_t opt)
                 click(click_hz, click_time);
                 break;
             case LFK_CLICK_TOGGLE:
-                if(click_toggle){
+                if (click_toggle) {
                     click_toggle = 0;
                     click(4000, 100);
                     click(1000, 100);
-                }else{
+                } else {
                     click_toggle = 1;
                     click(1000, 100);
                     click(4000, 100);
@@ -144,22 +149,18 @@ void action_function(keyrecord_t *event, uint8_t id, uint8_t opt)
     }
 }
 
-void reset_keyboard_kb(){
+void reset_keyboard_kb() {
 #ifdef WATCHDOG_ENABLE
     MCUSR = 0;
     wdt_disable();
     wdt_reset();
 #endif
+
     reset_keyboard();
 }
 
-void led_set_kb(uint8_t usb_led)
-{
-    led_set_user(usb_led);
-}
-
 // LFK lighting info
-const uint8_t rgb_matrices[] = {0, 1};
+const uint8_t rgb_matrices[] = { 0, 1 };
 const uint8_t rgb_sequence[] = {
     32,  1,  2,  3,
     31, 30,  5,  6,
@@ -172,5 +173,4 @@ const uint8_t rgb_sequence[] = {
      4,         25,
     13,         24,
           20
-
 };

keyboards/lfkeyboards/lfkpad/lfkpad.h

@@ -1,23 +1,6 @@
-#ifndef LFKPAD_H
+#pragma once
-#define LFKPAD_H
-
-/* if the kb.h file exists (because we're running from qmkbuilder) include it */
-#if __has_include("kb.h")
-#include "kb.h"
-#endif
 
 #include "quantum.h"
-#include "matrix.h"
-#include <avr/sfr_defs.h>
-
-#ifndef cbi
-#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
-#endif
-
-#ifndef sbi
-#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
-#endif
-
 
 typedef struct RGB_Color {
     uint16_t red;
@@ -57,7 +40,6 @@ void click(uint16_t freq, uint16_t duration);
 // readability
 #define ___ KC_NO
 
-
 #define LAYOUT_numpad_6x4( \
     k00, k01, k02, k03, \
     k10, k11, k12, k13, \
@@ -73,5 +55,3 @@ void click(uint16_t freq, uint16_t duration);
     { k40, k41, k42, k43 }, \
     { k50, ___, k52, ___ } \
 }
-
-#endif //LFKPAD_H

keyboards/lfkeyboards/lfkpad/readme.md

@@ -1,28 +1,15 @@
-bluepad keyboard firmware
+# LFKPad
-======================
 
-## Quantum MK Firmware
+![LFKPad](https://cdn11.bigcommerce.com/s-dvx2zpcx7r/images/stencil/500x659/products/118/385/img_0256__06462.1546304848.jpg)
 
-For the full Quantum feature list, see [the parent readme.md](/docs/README.md).
+Hotswap 21-key numpad PCB with USB-C, per-key RGB and underglow.
 
-## Building
+* Keyboard Maintainer: QMK community
+* Hardware Supported: LFKPad HS21 PCB
+* Hardware Availability: [LFKeyboards](https://www.lfkeyboards.com/lfkpad/)
 
-Download or clone the whole firmware and navigate to the keyboards/bluepad folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
+Make example for this keyboard (after setting up your build environment):
 
-Depending on which keymap you would like to use, you will have to compile slightly differently.
+    make lfkeyboards/lfkpad:default
 
-### Default
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
-
-To build with the default keymap, simply run `make`.
-
-### Other Keymaps
-
-Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
-
-To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
-
-```
-$ make keymap=[default|jack|<name>]
-```
-
-Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`

keyboards/lfkeyboards/lfkpad/rules.mk

@@ -11,26 +11,29 @@ MCU = atmega32u4
 #   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
-LAYOUTS = numpad_6x4
+# Build Options
-
+#   change yes to no to disable
+#
 BOOTMAGIC_ENABLE = no        # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = no         # Mouse keys
 EXTRAKEY_ENABLE = yes        # Audio control and System control
 CONSOLE_ENABLE = no          # Console for debug
 COMMAND_ENABLE = no          # Commands for debug and configuration
-NKRO_ENABLE = no               # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-BACKLIGHT_ENABLE = no          # Enable keyboard backlight functionality
-MIDI_ENABLE = no                # MIDI controls
-AUDIO_ENABLE = no               # Audio output on port C6
-UNICODE_ENABLE = no             # Unicode
-BLUETOOTH_ENABLE = no           # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes           # Enable WS2812 RGB underlight.
-RGBLIGHT_CUSTOM_DRIVER = yes    # RGB code is implemented in lefkeyboards, not qmk base
 SLEEP_LED_ENABLE = yes       # Breathing sleep LED during USB suspend
-TAP_DANCE_ENABLE = no
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no             # USB Nkey Rollover
+BACKLIGHT_ENABLE = no        # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not qmk base
+MIDI_ENABLE = no             # MIDI support
+BLUETOOTH_ENABLE = no        # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no            # Audio output on port C6
+FAUXCLICKY_ENABLE = no       # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no          # Enable support for HD44780 based LCDs
 
-ISSI_ENABLE = yes           # If the I2C pullup resistors aren't install this must be disabled
+ISSI_ENABLE = yes            # If the I2C pullup resistors aren't installed this must be disabled
-WATCHDOG_ENABLE = no       # Resets keyboard if matrix_scan isn't run every 250ms
+WATCHDOG_ENABLE = no         # Resets keyboard if matrix_scan() isn't run every 250ms
 
 SRC = TWIlib.c issi.c lighting.c
 
@@ -41,3 +44,5 @@ endif
 ifeq ($(strip $(WATCHDOG_ENABLE)), yes)
     TMK_COMMON_DEFS += -DWATCHDOG_ENABLE
 endif
+
+LAYOUTS = numpad_6x4