Add support for GeminiPR steno protocol.

This protocol breaks out "duplicate" keys into their own entry in the packet so that more complicated logic can be done on the software side, including support for additional languages and alternative theories.

keyboards/planck/keymaps/steno/Makefile

@@ -3,5 +3,5 @@ ifndef QUANTUM_DIR
 endif
 
 MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
-STENO_ENABLE = yes					# Enable TX Bolt protocol for Stenography, requires VIRTSER and may not work with mouse keys
+STENO_ENABLE = yes          # Additional protocols for Stenography(+1700), requires VIRTSER
-
+AUDIO_ENABLE = no           # Audio output on port C6

keyboards/planck/keymaps/steno/keymap.c

@@ -41,6 +41,9 @@ enum planck_keycodes {
   EXT_PLV
 };
 
+#define ST_BOLT QK_STENO_BOLT
+#define ST_GEM  QK_STENO_GEMINI
+
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* Qwerty
@@ -166,7 +169,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_ADJUST] = {
   {_______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL },
   {_______, _______, MU_MOD,  AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  PLOVER,  _______},
-  {_______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______},
+  {_______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, ST_BOLT, ST_GEM},
   {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
 }
 

quantum/keymap_extras/keymap_steno.h

@@ -18,8 +18,12 @@
 
 #include "keymap.h"
 
+// List of keycodes for the steno keyboard. To prevent
+// errors, this must be <= 42 total entries in order to
+// support the GeminiPR protocol.
 enum steno_keycodes {
-  STN_FN  = QK_STENO,
+  STN__MIN = QK_STENO,
+  STN_FN  = STN__MIN,
   STN_NUM,
   STN_N1 = STN_NUM,
   STN_N2,
@@ -65,7 +69,8 @@ enum steno_keycodes {
   STN_NA,
   STN_NB,
   STN_NC,
-  STN_ZR
+  STN_ZR,
+  STN__MAX = STN_ZR, // must be less than QK_STENO_BOLT
 };
 
 #endif

quantum/process_keycode/process_steno.c

@@ -3,10 +3,6 @@
 #include "keymap_steno.h"
 #include "virtser.h"
 
-uint8_t state[4] = {0};
-uint8_t pressed = 0;
-
-
 // TxBolt Codes
 #define TXB_NUL 0
 #define TXB_S_L 0b00000001
@@ -41,6 +37,13 @@ uint8_t pressed = 0;
 
 #define TXB_GET_GROUP(code) ((code & TXB_GRPMASK) >> 6)
 
+#define BOLT_STATE_SIZE 4
+#define GEMINI_STATE_SIZE 6
+
+uint8_t state[MAX(BOLT_STATE_SIZE, GEMINI_STATE_SIZE)] = {0};
+uint8_t pressed = 0;
+steno_mode_t mode;
+
 uint8_t boltmap[64] = {
   TXB_NUL, TXB_NUM, TXB_NUM, TXB_NUM, TXB_NUM, TXB_NUM, TXB_NUM,
   TXB_S_L, TXB_S_L, TXB_T_L, TXB_K_L, TXB_P_L, TXB_W_L, TXB_H_L,
@@ -52,31 +55,97 @@ uint8_t boltmap[64] = {
 
 #define BOLTMAP_MASK (sizeof(boltmap) - 1)
 
-void send_steno_state(void) {
+
-  for (uint8_t i = 0; i < 4; ++i) {
+void steno_clear_state(void) {
-    if (state[i]) {
+  memset(state, 0, sizeof(state));
-      virtser_send(state[i]);
-      state[i] = 0;
-    }
-  }
-  virtser_send(0);
 }
 
-bool process_steno(uint16_t keycode, keyrecord_t *record) {
+void steno_init() {
-  if(keycode >= QK_STENO && keycode <= QK_STENO_MAX) {
+  if (!eeconfig_is_enabled()) {
-    if(IS_PRESSED(record->event)) {
+    eeconfig_init();
-      uint8_t boltcode = boltmap[keycode & BOLTMAP_MASK];
+  }
-      ++pressed;
+  mode = eeprom_read_byte(EECONFIG_STENOMODE);
+}
+
+void steno_set_mode(steno_mode_t new_mode) {
+  steno_clear_state();
+  mode = new_mode;
+  eeprom_update_byte(EECONFIG_STENOMODE, mode);
+}
+
+void send_steno_state(uint8_t size, bool send_empty) {
+  for (uint8_t i = 0; i < size; ++i) {
+    if (state[i] || send_empty) {
+      virtser_send(state[i]);
+    }
+  }
+  steno_clear_state();
+}
+
+bool update_state_bolt(uint8_t key) {
+  uint8_t boltcode = boltmap[key];
   state[TXB_GET_GROUP(boltcode)] |= boltcode;
-    } else {
-      --pressed;
-      if (pressed <= 0) {
-        pressed = 0; // protect against spurious up keys
-        send_steno_state();
-      }
-    }
   return false;
 }
 
+bool send_state_bolt(void) {
+  send_steno_state(BOLT_STATE_SIZE, false);
+  virtser_send(0); // terminating byte
+  return false;
+}
+
+bool update_state_gemini(uint8_t key) {
+  state[key / 7] |= 1 << (6 - (key % 7));
+  return false;
+}
+
+bool send_state_gemini(void) {
+  state[0] |= 0x80; // Indicate start of packet
+  send_steno_state(GEMINI_STATE_SIZE, true);
+  return false;
+}
+
+bool process_steno(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QK_STENO_BOLT:
+      if (IS_PRESSED(record->event)) {
+        steno_set_mode(STENO_MODE_BOLT);
+      }
+      return false;
+
+    case QK_STENO_GEMINI:
+      if (IS_PRESSED(record->event)) {
+        steno_set_mode(STENO_MODE_GEMINI);
+      }
+      return false;
+
+    case STN__MIN...STN__MAX:
+      if (IS_PRESSED(record->event)) {
+        uint8_t key = keycode - QK_STENO;
+        ++pressed;
+        switch(mode) {
+          case STENO_MODE_BOLT:
+            return update_state_bolt(key);
+          case STENO_MODE_GEMINI:
+            return update_state_gemini(key);
+          default:
+            return false;
+        }
+      } else {
+        --pressed;
+        if (pressed <= 0) {
+          pressed = 0;
+          switch(mode) {
+            case STENO_MODE_BOLT:
+              return send_state_bolt();
+            case STENO_MODE_GEMINI:
+              return send_state_gemini();
+            default:
+              return false;
+          }
+        }
+      }
+
+  }
   return true;
 }

quantum/process_keycode/process_steno.h

@@ -7,6 +7,10 @@
   #error "must have virtser enabled to use steno"
 #endif
 
+typedef enum { STENO_MODE_BOLT, STENO_MODE_GEMINI } steno_mode_t;
+
 bool process_steno(uint16_t keycode, keyrecord_t *record);
+void steno_init(void);
+void steno_set_mode(steno_mode_t mode);
 
 #endif

quantum/quantum_keycodes.h

@@ -73,6 +73,8 @@ enum quantum_keycodes {
     QK_LAYER_TAP_TOGGLE_MAX = 0x58FF,
 #ifdef STENO_ENABLE
     QK_STENO              = 0x5900,
+    QK_STENO_BOLT         = 0x5930,
+    QK_STENO_GEMINI       = 0x5931,
     QK_STENO_MAX          = 0x593F,
 #endif
     QK_MOD_TAP            = 0x6000,

tmk_core/common/eeconfig.c

@@ -19,6 +19,9 @@ void eeconfig_init(void)
 #ifdef RGBLIGHT_ENABLE
     eeprom_update_dword(EECONFIG_RGBLIGHT,      0);
 #endif
+#ifdef STENO_ENABLE
+    eeprom_update_byte(EECONFIG_STENOMODE,      0);
+#endif
 }
 
 void eeconfig_enable(void)

tmk_core/common/eeconfig.h

@@ -34,6 +34,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define EECONFIG_AUDIO                              (uint8_t *)7
 #define EECONFIG_RGBLIGHT                           (uint32_t *)8
 #define EECONFIG_UNICODEMODE                        (uint8_t *)12
+#define EECONFIG_STENOMODE                          (uint8_t *)13
 
 
 /* debug bit */

tmk_core/common/keyboard.c

@@ -51,6 +51,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifdef RGBLIGHT_ENABLE
 #   include "rgblight.h"
 #endif
+#ifdef STENO_ENABLE
+#   include "process_steno.h"
+#endif
 #ifdef FAUXCLICKY_ENABLE
 #   include "fauxclicky.h"
 #endif
@@ -139,6 +142,9 @@ void keyboard_init(void) {
 #ifdef RGBLIGHT_ENABLE
     rgblight_init();
 #endif
+#ifdef STENO_ENABLE
+    steno_init();
+#endif
 #ifdef FAUXCLICKY_ENABLE
     fauxclicky_init();
 #endif