1
0
Fork 0

Merge remote-tracking branch 'origin/master' into develop

This commit is contained in:
QMK Bot 2021-06-26 04:42:38 +00:00
commit f8c01a8e5a
11 changed files with 248 additions and 0 deletions

93
keyboards/nk1/config.h Normal file
View file

@ -0,0 +1,93 @@
/* Copyright 2021 Yiancar
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x8968
#define PRODUCT_ID 0x4E4D
#define DEVICE_VER 0x0001
#define MANUFACTURER Yiancar-Designs
#define PRODUCT NK1
/* key matrix size */
#define MATRIX_ROWS 1
#define MATRIX_COLS 1
/* Keyboard Matrix Assignments */
#define DIRECT_PINS { \
{ D4 } \
}
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
*/
// #define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
#define RGB_DI_PIN F0
#ifdef RGB_DI_PIN
#define RGBLED_NUM 9
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#define RGBLIGHT_ANIMATIONS
#endif
/* There is only 1 Button so limiting VIA to 1 layer */
#define DYNAMIC_KEYMAP_LAYER_COUNT 1

12
keyboards/nk1/info.json Executable file
View file

@ -0,0 +1,12 @@
{
"keyboard_name": "NK1",
"url": "www.yiancar-designs.com",
"maintainer": "yiancar",
"width": 1,
"height": 1,
"layouts": {
"LAYOUT_ortho_1x1": {
"layout": [{"x": 0, "y": 0}]
}
}
}

View file

@ -0,0 +1,21 @@
/* Copyright 2021 Yiancar
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT_ortho_1x1( /* Base */
KC_ENT)
};

View file

@ -0,0 +1 @@
# The default keymap for NK1

View file

@ -0,0 +1,21 @@
/* Copyright 2021 Yiancar
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT_ortho_1x1( /* Base */
KC_ENT)
};

View file

@ -0,0 +1 @@
# The default keymap for NK1 with VIA enabled

View file

@ -0,0 +1 @@
VIA_ENABLE = yes

17
keyboards/nk1/nk1.c Normal file
View file

@ -0,0 +1,17 @@
/* Copyright 2021 Yiancar
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "nk1.h"

25
keyboards/nk1/nk1.h Normal file
View file

@ -0,0 +1,25 @@
/* Copyright 2021 Yiancar
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
#define LAYOUT_ortho_1x1( \
K00 \
) { \
{ K00 } \
}

32
keyboards/nk1/readme.md Normal file
View file

@ -0,0 +1,32 @@
# NK1
A big switch keypad!
* Keyboard Maintainer: [Yiancar](https://yiancar-designs.com/) and on [GitHub](https://github.com/yiancar)
* Hardware Supported: A BIG keypad with ATmega 32u4
* Hardware Availability: https://novelkeys.xyz/
## Instructions
### Build
Make example for this keyboard (after setting up your build environment):
make nk1:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
### Reset
- Unplug
- Hold the key
- Plug In
- Unplug
- Release the key
### Flash
- Unplug
- Hold the key
- Plug In
- Flash using QMK Toolbox or dfu-util (`make nk1:<keymap>:flash`)

24
keyboards/nk1/rules.mk Normal file
View file

@ -0,0 +1,24 @@
# MCU name
MCU = atmega32u4
# Bootloader selection
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
BLUETOOTH_ENABLE = no # Enable Bluetooth
AUDIO_ENABLE = no # Audio output
LAYOUTS = ortho_1x1