Merge remote-tracking branch 'origin/master' into develop
This commit is contained in:
commit
f92d153532
64 changed files with 2236 additions and 8 deletions
|
@ -150,7 +150,8 @@ The PMW 3360 is an SPI driven optical sensor, that uses a built in IR LED for su
|
|||
|`PMW3360_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` |
|
||||
|`PMW3360_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `3` |
|
||||
|`PMW3360_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ |
|
||||
|`ROTATIONAL_TRANSFORM_ANGLE` | (Optional) Allows for the sensor data to be rotated +/- 127 degrees directly in the sensor. | `0` |
|
||||
|`PMW3360_LIFTOFF_DISTANCE` | (Optional) Sets the lift off distance at run time | `0x02` |
|
||||
|`ROTATIONAL_TRANSFORM_ANGLE` | (Optional) Allows for the sensor data to be rotated +/- 30 degrees directly in the sensor. | `0` |
|
||||
|
||||
The CPI range is 100-12000, in increments of 100. Defaults to 1600 CPI.
|
||||
|
||||
|
|
|
@ -186,6 +186,8 @@ bool pmw3360_init(void) {
|
|||
|
||||
spi_write_adv(REG_Angle_Tune, constrain(ROTATIONAL_TRANSFORM_ANGLE, -127, 127));
|
||||
|
||||
spi_write_adv(REG_Lift_Config, PMW3360_LIFTOFF_DISTANCE);
|
||||
|
||||
bool init_success = pmw3360_check_signature();
|
||||
|
||||
writePinLow(PMW3360_CS_PIN);
|
||||
|
|
|
@ -46,6 +46,10 @@
|
|||
# endif
|
||||
#endif
|
||||
|
||||
#ifndef PMW3360_LIFTOFF_DISTANCE
|
||||
# define PMW3360_LIFTOFF_DISTANCE 0x02
|
||||
#endif
|
||||
|
||||
#ifndef ROTATIONAL_TRANSFORM_ANGLE
|
||||
# define ROTATIONAL_TRANSFORM_ANGLE 0x00
|
||||
#endif
|
||||
|
|
|
@ -2,12 +2,15 @@
|
|||
|
||||
A 60% hotswap inswitch RGB keyboard from KP Republic.
|
||||
|
||||
* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
|
||||
* Hardware Supported: BM60HSRGB
|
||||
* Hardware Availability: [KP Republic](https://kprepublic.com/products/bm60-rgb-60-gh60-hot-swappable-pcb-programmed-qmk-firmware-type-c)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make kprepublic/bm60hsrgb/rev1:default
|
||||
for rev1: make kprepublic/bm60hsrgb/rev1:default
|
||||
for rev2: make kprepublic/bm60hsrgb/rev2:default
|
||||
|
||||
To see which revision you have, look at the PCB. If it says bm60v2 on it, it's rev2. Otherwise it's rev1
|
||||
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
|
|
13
keyboards/kprepublic/bm60hsrgb/rev1/readme.md
Normal file
13
keyboards/kprepublic/bm60hsrgb/rev1/readme.md
Normal file
|
@ -0,0 +1,13 @@
|
|||
# BM60HSRGB
|
||||
|
||||
A 60% hotswap inswitch RGB keyboard from KP Republic.
|
||||
|
||||
* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
|
||||
* Hardware Supported: BM60HSRGB/rev1
|
||||
* Hardware Availability: [KP Republic](https://kprepublic.com/products/bm60-rgb-60-gh60-hot-swappable-pcb-programmed-qmk-firmware-type-c)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make kprepublic/bm60hsrgb/rev1:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
139
keyboards/kprepublic/bm60hsrgb/rev2/config.h
Normal file
139
keyboards/kprepublic/bm60hsrgb/rev2/config.h
Normal file
|
@ -0,0 +1,139 @@
|
|||
/* Copyright 2021 bdtc123
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x4B50
|
||||
#define PRODUCT_ID 0x1121
|
||||
#define DEVICE_VER 0x0002
|
||||
#define MANUFACTURER KP Republic
|
||||
#define PRODUCT BM60V2
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 14
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { E6, D2, D3, D5, F6 }
|
||||
#define MATRIX_COL_PINS { B2, B3, B7, B0, B1, F7, D4, D6, D7, B4, B5, B6, C6, C7 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION ROW2COL
|
||||
#define USB_POLLING_INTERVAL_MS 1
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 3
|
||||
|
||||
/* disable these deprecated features by default */
|
||||
#define NO_ACTION_MACRO
|
||||
#define NO_ACTION_FUNCTION
|
||||
//rgb light setting
|
||||
#define RGBLIGHT_LIMIT_VAL 150
|
||||
#define RGBLED_NUM 6
|
||||
#define RGB_DI_PIN F0
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_MOOD
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
|
||||
#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
|
||||
#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
|
||||
#define DRIVER_ADDR_1 0b1010000
|
||||
|
||||
#define RGB_MATRIX_KEYPRESSES
|
||||
// RGB Matrix Animation modes. Explicitly enabled
|
||||
// For full list of effects, see:
|
||||
// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
|
||||
#define ENABLE_RGB_MATRIX_ALPHAS_MODS
|
||||
#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
|
||||
#define ENABLE_RGB_MATRIX_BREATHING
|
||||
#define ENABLE_RGB_MATRIX_BAND_VAL
|
||||
#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
|
||||
#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
|
||||
#define ENABLE_RGB_MATRIX_CYCLE_ALL
|
||||
#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
|
||||
#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
|
||||
#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
|
||||
#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
|
||||
#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
|
||||
#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
|
||||
#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
|
||||
#define ENABLE_RGB_MATRIX_DUAL_BEACON
|
||||
#define ENABLE_RGB_MATRIX_RAINBOW_BEACON
|
||||
#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
|
||||
#define ENABLE_RGB_MATRIX_HUE_BREATHING
|
||||
#define ENABLE_RGB_MATRIX_HUE_PENDULUM
|
||||
#define ENABLE_RGB_MATRIX_HUE_WAVE
|
||||
#define ENABLE_RGB_MATRIX_PIXEL_RAIN
|
||||
#define ENABLE_RGB_MATRIX_PIXEL_FLOW
|
||||
#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
|
||||
// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
|
||||
#define ENABLE_RGB_MATRIX_TYPING_HEATMAP
|
||||
#define ENABLE_RGB_MATRIX_DIGITAL_RAIN
|
||||
// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
|
||||
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
|
||||
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE
|
||||
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
|
||||
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
|
||||
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
|
||||
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
|
||||
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
|
||||
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
|
||||
#define ENABLE_RGB_MATRIX_SPLASH
|
||||
#define ENABLE_RGB_MATRIX_MULTISPLASH
|
||||
#define ENABLE_RGB_MATRIX_SOLID_SPLASH
|
||||
#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
|
||||
|
||||
#define DRIVER_COUNT 2
|
||||
#define DRIVER_1_LED_TOTAL 63
|
||||
//#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL
|
||||
|
||||
#if defined(RGB_MATRIX_ENABLE) && defined(RGBLIGHT_ENABLE)
|
||||
#define RGB_MATRIX_DISABLE_KEYCODES
|
||||
#endif
|
||||
|
||||
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120
|
||||
|
||||
#define ISSI_LED_TOTAL DRIVER_1_LED_TOTAL
|
||||
|
||||
// Underglow LEDs are WS2812, but someone might want to use RGBLIGHT for them;
|
||||
// don't use those LEDs in RGB Matrix in that case.
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
# define WS2812_LED_TOTAL 0
|
||||
#else
|
||||
# define WS2812_LED_TOTAL 6
|
||||
#endif
|
||||
|
||||
#define DRIVER_LED_TOTAL (ISSI_LED_TOTAL + WS2812_LED_TOTAL)
|
||||
|
||||
#ifdef RGB_MATRIX_ENABLE
|
||||
# define RGB_MATRIX_KEYPRESSES
|
||||
# define RGB_MATRIX_FRAMEBUFFER_EFFECTS
|
||||
#endif
|
||||
|
78
keyboards/kprepublic/bm60hsrgb/rev2/info.json
Normal file
78
keyboards/kprepublic/bm60hsrgb/rev2/info.json
Normal file
|
@ -0,0 +1,78 @@
|
|||
{
|
||||
"keyboard_name": "bm60v2",
|
||||
"url": "",
|
||||
"maintainer": "kp republic",
|
||||
"layouts": {
|
||||
"LAYOUT": {
|
||||
"layout": [
|
||||
{"x":0, "y":0},
|
||||
{"x":1, "y":0},
|
||||
{"x":2, "y":0},
|
||||
{"x":3, "y":0},
|
||||
{"x":4, "y":0},
|
||||
{"x":5, "y":0},
|
||||
{"x":6, "y":0},
|
||||
{"x":7, "y":0},
|
||||
{"x":8, "y":0},
|
||||
{"x":9, "y":0},
|
||||
{"x":10, "y":0},
|
||||
{"x":11, "y":0},
|
||||
{"x":12, "y":0},
|
||||
{"x":13, "y":0, "w":2},
|
||||
|
||||
{"x":0, "y":1, "w":1.5},
|
||||
{"x":1.5, "y":1},
|
||||
{"x":2.5, "y":1},
|
||||
{"x":3.5, "y":1},
|
||||
{"x":4.5, "y":1},
|
||||
{"x":5.5, "y":1},
|
||||
{"x":6.5, "y":1},
|
||||
{"x":7.5, "y":1},
|
||||
{"x":8.5, "y":1},
|
||||
{"x":9.5, "y":1},
|
||||
{"x":10.5, "y":1},
|
||||
{"x":11.5, "y":1},
|
||||
{"x":12.5, "y":1},
|
||||
{"x":13.5, "y":1, "w":1.5},
|
||||
|
||||
{"x":0, "y":2, "w":1.75},
|
||||
{"x":1.75, "y":2},
|
||||
{"x":2.75, "y":2},
|
||||
{"x":3.75, "y":2},
|
||||
{"x":4.75, "y":2},
|
||||
{"x":5.75, "y":2},
|
||||
{"x":6.75, "y":2},
|
||||
{"x":7.75, "y":2},
|
||||
{"x":8.75, "y":2},
|
||||
{"x":9.75, "y":2},
|
||||
{"x":10.75, "y":2},
|
||||
{"x":11.75, "y":2},
|
||||
{"x":12.75, "y":2, "w":2.25},
|
||||
|
||||
{"x":0, "y":3, "w":2.25},
|
||||
{"x":2.25, "y":3},
|
||||
{"x":3.25, "y":3},
|
||||
{"x":4.25, "y":3},
|
||||
{"x":5.25, "y":3},
|
||||
{"x":6.25, "y":3},
|
||||
{"x":7.25, "y":3},
|
||||
{"x":8.25, "y":3},
|
||||
{"x":9.25, "y":3},
|
||||
{"x":10.25, "y":3},
|
||||
{"x":11.25, "y":3, "w":1.75},
|
||||
{"x":13, "y":3},
|
||||
{"x":14, "y":3},
|
||||
|
||||
{"x":0, "y":4, "w":1.25},
|
||||
{"x":1.25, "y":4, "w":1.25},
|
||||
{"x":2.5, "y":4, "w":1.25},
|
||||
{"x":3.75, "y":4, "w":6.25},
|
||||
{"x":10, "y":4},
|
||||
{"x":11, "y":4},
|
||||
{"x":12, "y":4},
|
||||
{"x":13, "y":4},
|
||||
{"x":14, "y":4}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
34
keyboards/kprepublic/bm60hsrgb/rev2/keymaps/default/keymap.c
Normal file
34
keyboards/kprepublic/bm60hsrgb/rev2/keymaps/default/keymap.c
Normal file
|
@ -0,0 +1,34 @@
|
|||
/* Copyright 2021 bdtc123
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
|
||||
),
|
||||
[1] = LAYOUT(
|
||||
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, RESET,
|
||||
_______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, NK_TOGG, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
)
|
||||
|
||||
};
|
47
keyboards/kprepublic/bm60hsrgb/rev2/keymaps/via/keymap.c
Normal file
47
keyboards/kprepublic/bm60hsrgb/rev2/keymaps/via/keymap.c
Normal file
|
@ -0,0 +1,47 @@
|
|||
/* Copyright 2021 bdtc123
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
|
||||
),
|
||||
[1] = LAYOUT(
|
||||
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, RESET,
|
||||
_______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, NK_TOGG, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
[2] = LAYOUT(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
[3] = LAYOUT(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
)
|
||||
};
|
2
keyboards/kprepublic/bm60hsrgb/rev2/keymaps/via/rules.mk
Normal file
2
keyboards/kprepublic/bm60hsrgb/rev2/keymaps/via/rules.mk
Normal file
|
@ -0,0 +1,2 @@
|
|||
VIA_ENABLE = yes
|
||||
LTO_ENABLE = yes
|
13
keyboards/kprepublic/bm60hsrgb/rev2/readme.md
Normal file
13
keyboards/kprepublic/bm60hsrgb/rev2/readme.md
Normal file
|
@ -0,0 +1,13 @@
|
|||
# BM60HSRGB
|
||||
|
||||
A 60% hotswap inswitch RGB keyboard from KP Republic.
|
||||
|
||||
* Keyboard Maintainer: [bdtc123](https://github.com/bdtc123)
|
||||
* Hardware Supported: BM60HSRGB/rev2
|
||||
* Hardware Availability: [KP Republic](https://kprepublic.com/products/bm60-rgb-60-gh60-hot-swappable-pcb-programmed-qmk-firmware-type-c)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make kprepublic/bm60hsrgb/rev2:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
200
keyboards/kprepublic/bm60hsrgb/rev2/rev2.c
Normal file
200
keyboards/kprepublic/bm60hsrgb/rev2/rev2.c
Normal file
|
@ -0,0 +1,200 @@
|
|||
/* Copyright 2021 bdtc123
|
||||
* Copyright 2021 sigprof
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include "rev2.h"
|
||||
|
||||
#ifdef RGB_MATRIX_ENABLE
|
||||
|
||||
# include "i2c_master.h"
|
||||
# include "is31fl3733.h"
|
||||
# include "ws2812.h"
|
||||
|
||||
const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = {
|
||||
{ 0, B_1, A_1, C_1 },
|
||||
{ 0, B_2, A_2, C_2 },
|
||||
{ 0, B_3, A_3, C_3 },
|
||||
{ 0, B_4, A_4, C_4 },
|
||||
{ 0, B_5, A_5, C_5 },
|
||||
{ 0, B_6, A_6, C_6 },
|
||||
{ 0, B_7, A_7, C_7 },
|
||||
{ 0, B_8, A_8, C_8 },
|
||||
{ 0, B_9, A_9, C_9 },
|
||||
{ 0, B_10, A_10, C_10 },
|
||||
{ 0, B_11, A_11, C_11 },
|
||||
{ 0, B_12, A_12, C_12 },
|
||||
{ 0, B_13, A_13, C_13 },
|
||||
{ 0, B_14, A_14, C_14 },
|
||||
|
||||
{ 0, E_1, D_1, F_1 },
|
||||
{ 0, E_2, D_2, F_2 },
|
||||
{ 0, E_3, D_3, F_3 },
|
||||
{ 0, E_4, D_4, F_4 },
|
||||
{ 0, E_5, D_5, F_5 },
|
||||
{ 0, E_6, D_6, F_6 },
|
||||
{ 0, E_7, D_7, F_7 },
|
||||
{ 0, E_8, D_8, F_8 },
|
||||
{ 0, E_9, D_9, F_9 },
|
||||
{ 0, E_10, D_10, F_10 },
|
||||
{ 0, E_11, D_11, F_11 },
|
||||
{ 0, E_12, D_12, F_12 },
|
||||
{ 0, E_13, D_13, F_13 },
|
||||
{ 0, E_14, D_14, F_14 },
|
||||
|
||||
{ 0, H_1, G_1, I_1 },
|
||||
{ 0, H_2, G_2, I_2 },
|
||||
{ 0, H_3, G_3, I_3 },
|
||||
{ 0, H_4, G_4, I_4 },
|
||||
{ 0, H_5, G_5, I_5 },
|
||||
{ 0, H_6, G_6, I_6 },
|
||||
{ 0, H_7, G_7, I_7 },
|
||||
{ 0, H_8, G_8, I_8 },
|
||||
{ 0, H_9, G_9, I_9 },
|
||||
{ 0, H_10, G_10, I_10 },
|
||||
{ 0, H_11, G_11, I_11 },
|
||||
{ 0, H_12, G_12, I_12 },
|
||||
{ 0, H_14, G_14, I_14 },
|
||||
|
||||
{ 0, K_1, J_1, L_1 },
|
||||
{ 0, K_2, J_2, L_2 },
|
||||
{ 0, K_3, J_3, L_3 },
|
||||
{ 0, K_4, J_4, L_4 },
|
||||
{ 0, K_5, J_5, L_5 },
|
||||
{ 0, K_6, J_6, L_6 },
|
||||
{ 0, K_7, J_7, L_7 },
|
||||
{ 0, K_8, J_8, L_8 },
|
||||
{ 0, K_9, J_9, L_9 },
|
||||
{ 0, K_10, J_10, L_10 },
|
||||
{ 0, K_12, J_12, L_12 },
|
||||
{ 0, K_13, J_13, L_13 },
|
||||
{ 0, K_14, J_14, L_14 },
|
||||
|
||||
{ 0, H_16, G_16, I_16 },
|
||||
{ 0, H_15, G_15, I_15 },
|
||||
{ 0, H_13, G_13, I_13 },
|
||||
{ 0, E_15, D_15, F_15 },
|
||||
{ 0, K_15, J_15, L_15 },
|
||||
{ 0, K_11, J_11, L_11 },
|
||||
{ 0, K_16, J_16, L_16 },
|
||||
{ 0, B_16, A_16, C_16 },
|
||||
{ 0, E_16, D_16, F_16 }
|
||||
};
|
||||
|
||||
led_config_t g_led_config = {
|
||||
{
|
||||
{ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 },
|
||||
{ 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27 },
|
||||
{ 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, NO_LED, 40 },
|
||||
{ 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, NO_LED, 51, 52, 53 },
|
||||
{ 54, 55, 56, NO_LED, NO_LED, 57, NO_LED, NO_LED, NO_LED, 58, 59, 60, 61, 62 }
|
||||
}, {
|
||||
// Esc, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, -, =, Backspace
|
||||
{ 0, 0 }, { 15, 0 }, { 30, 0 }, { 45, 0 }, { 60, 0 }, { 75, 0 }, { 90, 0 }, { 105, 0 }, { 120, 0 }, { 135, 0 }, { 150, 0 }, { 165, 0 }, { 180, 0 }, { 202, 0 },
|
||||
// Tab, Q, W, E, R, T, Y, U, I, O, P, [, ], ,
|
||||
{ 7, 16 }, { 22, 16 }, { 37, 16 }, { 52, 16 }, { 67, 16 }, { 82, 16 }, { 97, 16 }, { 112, 16 }, { 127, 16 }, { 142, 16 }, { 157, 16 }, { 172, 16 }, { 187, 16 }, { 206, 16 },
|
||||
// Capslock, A, S, D, F, G, H, A, K, L, ;, ', Enter
|
||||
{ 11, 32 }, { 26, 32 }, { 41, 32 }, { 56, 32 }, { 71, 32 }, { 86, 32 }, { 101, 32 }, { 116, 32 }, { 131, 32 }, { 146, 32 }, { 161, 32 }, { 176, 32 }, { 198, 32 },
|
||||
// LShift, Z, X, C, V, B, N, M, ,, ., /, Shift, Up,
|
||||
{ 18, 48 }, { 30, 48 }, { 45, 48 }, { 60, 48 }, { 75, 48 }, { 90, 48 }, { 105, 48 }, { 120, 48 }, { 135, 48 }, { 150, 48 }, { 165, 48 }, { 191, 48 }, { 210, 48 },
|
||||
// Ctrl, GUI, Alt, Space, RAlt, FN, Left, Down, Right
|
||||
{ 3, 64 }, { 22, 64 }, { 33, 64 }, { 101, 64 }, { 135, 64 }, { 153, 64 }, { 195, 64 }, { 210, 64 }, { 225, 64 }
|
||||
# if WS2812_LED_TOTAL > 0
|
||||
,{ 28, 40}, { 62, 40}, { 96, 40}, {130, 40}, {164, 40}, {198, 40}
|
||||
# endif
|
||||
}, {
|
||||
// Esc, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, -, =, Backspace
|
||||
4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
|
||||
// Tab, Q, W, E, R, T, Y, U, I, O, P, [, ],
|
||||
1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
|
||||
// Capslock, A, S, D, F, G, H, A, K, L, ;, ', Enter
|
||||
9, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
|
||||
// LShift, Z, X, C, V, B, N, M, ,, ., /, Shift, Up, ?
|
||||
1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 4,
|
||||
// Ctrl, GUI, Alt, Space, RAlt, FN, Left, Down, Right
|
||||
1, 1, 1, 4, 1, 1, 1, 1, 1
|
||||
# if WS2812_LED_TOTAL > 0
|
||||
,2, 2, 2, 2, 2, 2
|
||||
# endif
|
||||
}
|
||||
};
|
||||
|
||||
__attribute__ ((weak))
|
||||
void rgb_matrix_indicators_user(void) {
|
||||
if (host_keyboard_led_state().caps_lock) {
|
||||
rgb_matrix_set_color(28, 0xFF, 0xFF, 0xFF);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
// clang-format on
|
||||
|
||||
// ==========================================================================
|
||||
// Custom RGB Matrix driver that combines IS31FL3733 and WS2812
|
||||
// ==========================================================================
|
||||
|
||||
# if WS2812_LED_TOTAL > 0
|
||||
LED_TYPE rgb_matrix_ws2812_array[WS2812_LED_TOTAL];
|
||||
# endif
|
||||
|
||||
static void rgb_matrix_driver_init(void) {
|
||||
i2c_init();
|
||||
IS31FL3733_init(DRIVER_ADDR_1, 0);
|
||||
for (uint8_t index = 0; index < ISSI_LED_TOTAL; index++) {
|
||||
bool enabled = true;
|
||||
IS31FL3733_set_led_control_register(index, enabled, enabled, enabled);
|
||||
}
|
||||
IS31FL3733_update_led_control_registers(DRIVER_ADDR_1, 0);
|
||||
}
|
||||
|
||||
static void rgb_matrix_driver_flush(void) {
|
||||
IS31FL3733_update_pwm_buffers(DRIVER_ADDR_1, 0);
|
||||
# if WS2812_LED_TOTAL > 0
|
||||
ws2812_setleds(rgb_matrix_ws2812_array, WS2812_LED_TOTAL);
|
||||
# endif
|
||||
}
|
||||
|
||||
static void rgb_matrix_driver_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
|
||||
if (index < ISSI_LED_TOTAL) {
|
||||
IS31FL3733_set_color(index, red, green, blue);
|
||||
} else {
|
||||
# if WS2812_LED_TOTAL > 0
|
||||
rgb_matrix_ws2812_array[index - ISSI_LED_TOTAL].r = red;
|
||||
rgb_matrix_ws2812_array[index - ISSI_LED_TOTAL].g = green;
|
||||
rgb_matrix_ws2812_array[index - ISSI_LED_TOTAL].b = blue;
|
||||
# endif
|
||||
}
|
||||
}
|
||||
|
||||
static void rgb_matrix_driver_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
|
||||
IS31FL3733_set_color_all(red, green, blue);
|
||||
# if WS2812_LED_TOTAL > 0
|
||||
for (uint8_t i = 0; i < WS2812_LED_TOTAL; i++) {
|
||||
rgb_matrix_ws2812_array[i].r = red;
|
||||
rgb_matrix_ws2812_array[i].g = green;
|
||||
rgb_matrix_ws2812_array[i].b = blue;
|
||||
}
|
||||
# endif
|
||||
}
|
||||
|
||||
// clang-format off
|
||||
const rgb_matrix_driver_t rgb_matrix_driver = {
|
||||
.init = rgb_matrix_driver_init,
|
||||
.flush = rgb_matrix_driver_flush,
|
||||
.set_color = rgb_matrix_driver_set_color,
|
||||
.set_color_all = rgb_matrix_driver_set_color_all,
|
||||
};
|
||||
// clang-format on
|
||||
|
||||
#endif /* RGB_MATRIX_ENABLE */
|
32
keyboards/kprepublic/bm60hsrgb/rev2/rev2.h
Normal file
32
keyboards/kprepublic/bm60hsrgb/rev2/rev2.h
Normal file
|
@ -0,0 +1,32 @@
|
|||
/* Copyright 2021 bdtc123
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define LAYOUT( \
|
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
|
||||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3B, K3C, K3D, \
|
||||
K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
|
||||
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, KC_NO, K3B, K3C, K3D }, \
|
||||
{ K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C, K4D }, \
|
||||
}
|
27
keyboards/kprepublic/bm60hsrgb/rev2/rules.mk
Normal file
27
keyboards/kprepublic/bm60hsrgb/rev2/rules.mk
Normal file
|
@ -0,0 +1,27 @@
|
|||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Enable N-Key Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||
AUDIO_ENABLE = no # Audio output
|
||||
NO_USB_STARTUP_CHECK = no
|
||||
LTO_ENABLE = yes
|
||||
RGB_MATRIX_ENABLE = yes
|
||||
RGB_MATRIX_DRIVER = custom
|
||||
WS2812_DRIVER_REQUIRED = yes
|
||||
|
||||
COMMON_VPATH += $(DRIVER_PATH)/led/issi
|
||||
SRC += is31fl3733.c
|
||||
QUANTUM_LIB_SRC += i2c_master.c
|
143
keyboards/mechwild/waka60/config.h
Normal file
143
keyboards/mechwild/waka60/config.h
Normal file
|
@ -0,0 +1,143 @@
|
|||
/*
|
||||
Copyright 2021 Kyle McCreery
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x6D77 // mw = "MechWild"
|
||||
#define PRODUCT_ID 0x1709
|
||||
#define DEVICE_VER 0x0101
|
||||
#define MANUFACTURER MechWild
|
||||
#define PRODUCT Waka60
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 10
|
||||
#define MATRIX_COLS 7
|
||||
|
||||
#define EEPROM_I2C_24LC64
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { B8, B4, B3, B9, A15, B12, B13, B14, B15, A8 }
|
||||
#define MATRIX_COL_PINS { B10, B1, B0, A7, A6, A5, A4 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* encoder pins */
|
||||
#define ENCODERS_PAD_A { A3 }
|
||||
#define ENCODERS_PAD_B { A2 }
|
||||
|
||||
/* encoder resolution */
|
||||
#define ENCODER_RESOLUTION 4
|
||||
#define TAP_CODE_DELAY 10
|
||||
|
||||
/* COL2ROW, ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* RGB settings, uncomment this define to enable RGB */
|
||||
#define RGB_DI_PIN A1
|
||||
#ifdef RGB_DI_PIN
|
||||
# define RGBLED_NUM 3
|
||||
# define RGBLIGHT_HUE_STEP 8
|
||||
# define RGBLIGHT_SAT_STEP 8
|
||||
# define RGBLIGHT_VAL_STEP 8
|
||||
# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
|
||||
# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||
#define RGBLIGHT_EFFECT_BREATHING
|
||||
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||
#define RGBLIGHT_EFFECT_SNAKE
|
||||
#define RGBLIGHT_EFFECT_KNIGHT
|
||||
#define RGBLIGHT_EFFECT_CHRISTMAS
|
||||
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
||||
#define RGBLIGHT_EFFECT_RGB_TEST
|
||||
#define RGBLIGHT_EFFECT_ALTERNATING
|
||||
#define RGBLIGHT_EFFECT_TWINKLE
|
||||
/*== customize breathing effect ==*/
|
||||
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
|
||||
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
|
||||
/*==== use exp() and sin() ====*/
|
||||
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
|
||||
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
|
||||
#endif
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||
* This is useful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||
*/
|
||||
//#define GRAVE_ESC_CTRL_OVERRIDE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
|
||||
/* disable these deprecated features by default */
|
||||
#define NO_ACTION_MACRO
|
||||
#define NO_ACTION_FUNCTION
|
||||
|
||||
/* Bootmagic Lite key configuration */
|
||||
//#define BOOTMAGIC_LITE_ROW 0
|
||||
//#define BOOTMAGIC_LITE_COLUMN 0
|
25
keyboards/mechwild/waka60/f401/halconf.h
Normal file
25
keyboards/mechwild/waka60/f401/halconf.h
Normal file
|
@ -0,0 +1,25 @@
|
|||
/* Copyright 2021 Kyle McCreery
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#define HAL_USE_I2C TRUE
|
||||
#define HAL_USE_PWM TRUE
|
||||
#define HAL_USE_PAL TRUE
|
||||
#define HAL_USE_GPT TRUE
|
||||
|
||||
#include_next <halconf.h>
|
||||
|
27
keyboards/mechwild/waka60/f401/mcuconf.h
Normal file
27
keyboards/mechwild/waka60/f401/mcuconf.h
Normal file
|
@ -0,0 +1,27 @@
|
|||
/* Copyright 2021 Kyle McCreery
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include_next <mcuconf.h>
|
||||
|
||||
#undef STM32_I2C_USE_I2C1
|
||||
#define STM32_I2C_USE_I2C1 TRUE
|
||||
|
||||
#undef STM32_PWM_USE_TIM1
|
||||
#define STM32_PWM_USE_TIM1 TRUE
|
||||
#undef STM32_GPT_USE_TIM4
|
||||
#define STM32_GPT_USE_TIM4 TRUE
|
5
keyboards/mechwild/waka60/f401/rules.mk
Normal file
5
keyboards/mechwild/waka60/f401/rules.mk
Normal file
|
@ -0,0 +1,5 @@
|
|||
# MCU name
|
||||
MCU = STM32F401
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = stm32-dfu
|
22
keyboards/mechwild/waka60/f411/halconf.h
Normal file
22
keyboards/mechwild/waka60/f411/halconf.h
Normal file
|
@ -0,0 +1,22 @@
|
|||
/* Copyright 2021 Kyle McCreery
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#define HAL_USE_I2C TRUE
|
||||
|
||||
#include_next <halconf.h>
|
||||
|
23
keyboards/mechwild/waka60/f411/mcuconf.h
Normal file
23
keyboards/mechwild/waka60/f411/mcuconf.h
Normal file
|
@ -0,0 +1,23 @@
|
|||
/* Copyright 2021 Kyle McCreery
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include_next <mcuconf.h>
|
||||
|
||||
#undef STM32_I2C_USE_I2C1
|
||||
#define STM32_I2C_USE_I2C1 TRUE
|
||||
|
5
keyboards/mechwild/waka60/f411/rules.mk
Normal file
5
keyboards/mechwild/waka60/f411/rules.mk
Normal file
|
@ -0,0 +1,5 @@
|
|||
# MCU name
|
||||
MCU = STM32F411
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = stm32-dfu
|
73
keyboards/mechwild/waka60/info.json
Normal file
73
keyboards/mechwild/waka60/info.json
Normal file
|
@ -0,0 +1,73 @@
|
|||
{
|
||||
"keyboard_name": "MechWild Waka60",
|
||||
"url": "mechwild.com",
|
||||
"maintainer": "Kyle McCreery",
|
||||
"layouts": {
|
||||
"LAYOUT": {
|
||||
"layout": [
|
||||
{"label": "k00", "x": 0, "y": 0},
|
||||
{"label": "k01", "x": 1, "y": 0},
|
||||
{"label": "k02", "x": 2, "y": 0},
|
||||
{"label": "k03", "x": 3, "y": 0},
|
||||
{"label": "k04", "x": 4, "y": 0},
|
||||
{"label": "k05", "x": 5, "y": 0},
|
||||
{"label": "k50", "x": 7, "y": 0},
|
||||
{"label": "k51", "x": 8, "y": 0},
|
||||
{"label": "k52", "x": 9, "y": 0},
|
||||
{"label": "k53", "x": 10, "y": 0},
|
||||
{"label": "k54", "x": 11, "y": 0},
|
||||
{"label": "k55", "x": 12, "y": 0},
|
||||
{"label": "k10", "x": 0, "y": 1},
|
||||
{"label": "k11", "x": 1, "y": 1},
|
||||
{"label": "k12", "x": 2, "y": 1},
|
||||
{"label": "k13", "x": 3, "y": 1},
|
||||
{"label": "k14", "x": 4, "y": 1},
|
||||
{"label": "k15", "x": 5, "y": 1},
|
||||
{"label": "k60", "x": 7, "y": 1},
|
||||
{"label": "k61", "x": 8, "y": 1},
|
||||
{"label": "k62", "x": 9, "y": 1},
|
||||
{"label": "k63", "x": 10, "y": 1},
|
||||
{"label": "k64", "x": 11, "y": 1},
|
||||
{"label": "k65", "x": 12, "y": 1},
|
||||
{"label": "k20", "x": 0, "y": 2},
|
||||
{"label": "k21", "x": 1, "y": 2},
|
||||
{"label": "k22", "x": 2, "y": 2},
|
||||
{"label": "k23", "x": 3, "y": 2},
|
||||
{"label": "k24", "x": 4, "y": 2},
|
||||
{"label": "k25", "x": 5, "y": 2},
|
||||
{"label": "k70", "x": 7, "y": 2},
|
||||
{"label": "k71", "x": 8, "y": 2},
|
||||
{"label": "k72", "x": 9, "y": 2},
|
||||
{"label": "k73", "x": 10, "y": 2},
|
||||
{"label": "k74", "x": 11, "y": 2},
|
||||
{"label": "k75", "x": 12, "y": 2},
|
||||
{"label": "k30", "x": 0, "y": 3},
|
||||
{"label": "k31", "x": 1, "y": 3},
|
||||
{"label": "k32", "x": 2, "y": 3},
|
||||
{"label": "k33", "x": 3, "y": 3},
|
||||
{"label": "k34", "x": 4, "y": 3},
|
||||
{"label": "k35", "x": 5, "y": 3},
|
||||
{"label": "k36", "x": 6, "y": 3},
|
||||
{"label": "k80", "x": 7, "y": 3},
|
||||
{"label": "k81", "x": 8, "y": 3},
|
||||
{"label": "k82", "x": 9, "y": 3},
|
||||
{"label": "k83", "x": 10, "y": 3},
|
||||
{"label": "k84", "x": 11, "y": 3},
|
||||
{"label": "k85", "x": 12, "y": 3},
|
||||
{"label": "k40", "x": 0, "y": 4},
|
||||
{"label": "k41", "x": 1, "y": 4},
|
||||
{"label": "k42", "x": 2, "y": 4},
|
||||
{"label": "k43", "x": 3, "y": 4},
|
||||
{"label": "k44", "x": 4, "y": 4},
|
||||
{"label": "k45", "x": 5, "y": 4},
|
||||
{"label": "k46", "x": 6, "y": 4},
|
||||
{"label": "k90", "x": 7, "y": 4},
|
||||
{"label": "k91", "x": 8, "y": 4},
|
||||
{"label": "k92", "x": 9, "y": 4},
|
||||
{"label": "k93", "x": 10, "y": 4},
|
||||
{"label": "k94", "x": 11, "y": 4},
|
||||
{"label": "k95", "x": 12, "y": 4}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
23
keyboards/mechwild/waka60/keymaps/audio/config.h
Normal file
23
keyboards/mechwild/waka60/keymaps/audio/config.h
Normal file
|
@ -0,0 +1,23 @@
|
|||
/*
|
||||
Copyright 2021 Kyle McCreery
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#define AUDIO_PIN B5
|
||||
#define AUDIO_PWM_DRIVER PWMD1
|
||||
#define AUDIO_PWM_CHANNEL 1
|
||||
#define AUDIO_STATE_TIMER GPTD4
|
57
keyboards/mechwild/waka60/keymaps/audio/keymap.c
Normal file
57
keyboards/mechwild/waka60/keymaps/audio/keymap.c
Normal file
|
@ -0,0 +1,57 @@
|
|||
/* Copyright 2021 Kyle McCreery
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
// Defines names for use in layer keycodes and the keymap
|
||||
enum layer_names {
|
||||
_BASE,
|
||||
_FN1,
|
||||
_FN2,
|
||||
_FN3
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Base */
|
||||
[_BASE] = LAYOUT(
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS,
|
||||
MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_MUTE, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, MO(1), KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_RALT, KC_RGUI, KC_RCTL
|
||||
),
|
||||
[_FN1] = LAYOUT(
|
||||
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL,
|
||||
KC_TRNS, AU_TOG, RGB_TOG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, MU_TOG, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, MU_MOD, RGB_RMOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
[_FN2] = LAYOUT(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
[_FN3] = LAYOUT(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
3
keyboards/mechwild/waka60/keymaps/audio/rules.mk
Normal file
3
keyboards/mechwild/waka60/keymaps/audio/rules.mk
Normal file
|
@ -0,0 +1,3 @@
|
|||
VIA_ENABLE = yes
|
||||
AUDIO_ENABLE = yes
|
||||
AUDIO_DRIVER = pwm_software
|
57
keyboards/mechwild/waka60/keymaps/default/keymap.c
Normal file
57
keyboards/mechwild/waka60/keymaps/default/keymap.c
Normal file
|
@ -0,0 +1,57 @@
|
|||
/* Copyright 2021 Kyle McCreery
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
// Defines names for use in layer keycodes and the keymap
|
||||
enum layer_names {
|
||||
_BASE,
|
||||
_FN1,
|
||||
_FN2,
|
||||
_FN3
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Base */
|
||||
[_BASE] = LAYOUT(
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS,
|
||||
MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_MUTE, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, MO(1), KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_RALT, KC_RGUI, KC_RCTL
|
||||
),
|
||||
[_FN1] = LAYOUT(
|
||||
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL,
|
||||
KC_TRNS, KC_TRNS, RGB_TOG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, RGB_RMOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
[_FN2] = LAYOUT(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
[_FN3] = LAYOUT(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
57
keyboards/mechwild/waka60/keymaps/via/keymap.c
Normal file
57
keyboards/mechwild/waka60/keymaps/via/keymap.c
Normal file
|
@ -0,0 +1,57 @@
|
|||
/* Copyright 2021 Kyle McCreery
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
// Defines names for use in layer keycodes and the keymap
|
||||
enum layer_names {
|
||||
_BASE,
|
||||
_FN1,
|
||||
_FN2,
|
||||
_FN3
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Base */
|
||||
[_BASE] = LAYOUT(
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS,
|
||||
MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_MUTE, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, MO(1), KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_RALT, KC_RGUI, KC_RCTL
|
||||
),
|
||||
[_FN1] = LAYOUT(
|
||||
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL,
|
||||
KC_TRNS, AU_TOG, RGB_TOG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, MU_TOG, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, MU_MOD, RGB_RMOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
[_FN2] = LAYOUT(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
[_FN3] = LAYOUT(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
2
keyboards/mechwild/waka60/keymaps/via/rules.mk
Normal file
2
keyboards/mechwild/waka60/keymaps/via/rules.mk
Normal file
|
@ -0,0 +1,2 @@
|
|||
VIA_ENABLE = yes
|
||||
|
19
keyboards/mechwild/waka60/readme.md
Normal file
19
keyboards/mechwild/waka60/readme.md
Normal file
|
@ -0,0 +1,19 @@
|
|||
# Waka60
|
||||
|
||||
![waka](https://i.imgur.com/ohyE83Sh.png)
|
||||
|
||||
An affordable Ortholinear keyboard kit featuring a speaker, top-facing RGB LEDs, a center encoder, spacing between the halves, and powered by the STM32 Blackpill.
|
||||
|
||||
* Keyboard Maintainer: [Kyle McCreery](https://github.com/kylemccreery)
|
||||
* Hardware Supported: Waka60 v1.1
|
||||
* Hardware Availability: [Waka60 on MechWild](https://mechwild.com/product/waka/)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make mechwild/waka60:default
|
||||
|
||||
Flashing example for this keyboard:
|
||||
|
||||
make mechwild/waka60:default:flash
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
17
keyboards/mechwild/waka60/rules.mk
Normal file
17
keyboards/mechwild/waka60/rules.mk
Normal file
|
@ -0,0 +1,17 @@
|
|||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = no # Enable N-Key Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||
AUDIO_ENABLE = no # Audio output
|
||||
ENCODER_ENABLE = yes # Encoder Enabled
|
||||
|
||||
EEPROM_DRIVER = i2c
|
||||
|
||||
DEFAULT_FOLDER = mechwild/waka60/f401
|
37
keyboards/mechwild/waka60/waka60.c
Normal file
37
keyboards/mechwild/waka60/waka60.c
Normal file
|
@ -0,0 +1,37 @@
|
|||
/* Copyright 2021 Kyle McCreery
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "waka60.h"
|
||||
void board_init(void) {
|
||||
// B9 is configured as I2C1_SDA in the board file; that function must be
|
||||
// disabled before using B7 as I2C1_SDA.
|
||||
setPinInputHigh(B9);
|
||||
}
|
||||
#ifdef ENCODER_ENABLE
|
||||
bool encoder_update_kb(uint8_t index, bool clockwise) {
|
||||
if (!encoder_update_user(index, clockwise)) { return false; }
|
||||
switch (index) {
|
||||
case 0:
|
||||
if (clockwise) {
|
||||
tap_code(KC_VOLU);
|
||||
} else {
|
||||
tap_code(KC_VOLD);
|
||||
}
|
||||
break;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
#endif
|
49
keyboards/mechwild/waka60/waka60.h
Normal file
49
keyboards/mechwild/waka60/waka60.h
Normal file
|
@ -0,0 +1,49 @@
|
|||
/* Copyright 2021 Kyle McCreery
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define ___ KC_NO
|
||||
|
||||
/* This is a shortcut to help you visually see your layout.
|
||||
*
|
||||
* The first section contains all of the arguments representing the physical
|
||||
* layout of the board and position of the keys.
|
||||
*
|
||||
* The second converts the arguments into a two-dimensional array which
|
||||
* represents the switch matrix.
|
||||
*/
|
||||
|
||||
#define LAYOUT( \
|
||||
k00, k01, k02, k03, k04, k05, k50, k51, k52, k53, k54, k55, \
|
||||
k10, k11, k12, k13, k14, k15, k60, k61, k62, k63, k64, k65, \
|
||||
k20, k21, k22, k23, k24, k25, k70, k71, k72, k73, k74, k75, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k80, k81, k82, k83, k84, k85, \
|
||||
k40, k41, k42, k43, k44, k45, k46, k90, k91, k92, k93, k94, k95 \
|
||||
) { \
|
||||
{ k00, k01, k02, k03, k04, k05, ___}, \
|
||||
{ k10, k11, k12, k13, k14, k15, ___}, \
|
||||
{ k20, k21, k22, k23, k24, k25, ___}, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36}, \
|
||||
{ k40, k41, k42, k43, k44, k45, k46}, \
|
||||
{ k50, k51, k52, k53, k54, k55, ___}, \
|
||||
{ k60, k61, k62, k63, k64, k65, ___}, \
|
||||
{ k70, k71, k72, k73, k74, k75, ___}, \
|
||||
{ k80, k81, k82, k83, k84, k85, ___}, \
|
||||
{ k90, k91, k92, k93, k94, k95, ___} \
|
||||
}
|
41
keyboards/mokey/ginkgo65hot/config.h
Normal file
41
keyboards/mokey/ginkgo65hot/config.h
Normal file
|
@ -0,0 +1,41 @@
|
|||
/*
|
||||
Copyright 2021 Kyle McCreery
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x6653
|
||||
#define PRODUCT_ID 0x3366
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Mokey
|
||||
#define PRODUCT ginkgo65hot
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 15
|
||||
|
||||
#define MATRIX_ROW_PINS { F7, B7, F5, F1, B0 }
|
||||
#define MATRIX_COL_PINS { C7, F6, B2, F4, B3, E6, D0, D1, D2, D3, D5, D4, D6, D7, B4 }
|
||||
#define UNUSED_PINS
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define BACKLIGHT_PIN B6
|
||||
#define BACKLIGHT_LEVELS 6
|
||||
#define BACKLIGHT_CAPS_LOCK
|
||||
#define BACKLIGHT_BREATHING
|
||||
#define BREATHING_PERIOD 5
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
16
keyboards/mokey/ginkgo65hot/ginkgo65hot.c
Normal file
16
keyboards/mokey/ginkgo65hot/ginkgo65hot.c
Normal file
|
@ -0,0 +1,16 @@
|
|||
/* Copyright 2021 Ocean
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include "ginkgo65hot.h"
|
||||
|
47
keyboards/mokey/ginkgo65hot/ginkgo65hot.h
Normal file
47
keyboards/mokey/ginkgo65hot/ginkgo65hot.h
Normal file
|
@ -0,0 +1,47 @@
|
|||
/* Copyright 2021 Ocean
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define XXX KC_NO
|
||||
|
||||
/*LAYOUT
|
||||
* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
|
||||
* │k00│k01│k02│k03│k04│k05│k06│k07│k08│k09│k0A│k0B│k0C│ k0D │k0E│
|
||||
* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
|
||||
* │ k10 │k11│k12│k13│k14│k15│k16│k17│k18│k19│k1A│k1B│k1C│ k1D │k1E│
|
||||
* ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
|
||||
* │ k20 │k21│k22│k23│k24│k25│k26│k27│k28│k29│k2A│k2B│ k2D │k2E│
|
||||
* ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
|
||||
* │ k30 │k32│k33│k34│k35│k36│k37│k38│k39│k3A│k3B│ k3C │k3D│k3E│
|
||||
* ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
|
||||
* │k40 │k41 │k42 │ k44 │k49 │k4A │ │k4C│k4D│k4E│
|
||||
* └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
|
||||
*/
|
||||
#define LAYOUT( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, k2E, \
|
||||
k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \
|
||||
k40, k41, k42, k44, k49, k4A, k4C, k4D, k4E \
|
||||
) { \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \
|
||||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, XXX, k2D, k2E }, \
|
||||
{ k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \
|
||||
{ k40, k41, k42, XXX, k44, XXX, XXX, XXX, XXX, k49, k4A, XXX, k4C, k4D, k4E }, \
|
||||
}
|
82
keyboards/mokey/ginkgo65hot/info.json
Normal file
82
keyboards/mokey/ginkgo65hot/info.json
Normal file
|
@ -0,0 +1,82 @@
|
|||
{
|
||||
"keyboard_name": "ginkgo65hot",
|
||||
"url": "",
|
||||
"maintainer": "mokey",
|
||||
"layouts": {
|
||||
"LAYOUT": {
|
||||
"layout": [
|
||||
{"label":"k00", "x":0, "y":0},
|
||||
{"label":"k01", "x":1, "y":0},
|
||||
{"label":"k02", "x":2, "y":0},
|
||||
{"label":"k03", "x":3, "y":0},
|
||||
{"label":"k04", "x":4, "y":0},
|
||||
{"label":"k05", "x":5, "y":0},
|
||||
{"label":"k06", "x":6, "y":0},
|
||||
{"label":"k07", "x":7, "y":0},
|
||||
{"label":"k08", "x":8, "y":0},
|
||||
{"label":"k09", "x":9, "y":0},
|
||||
{"label":"k0a", "x":10, "y":0},
|
||||
{"label":"k0b", "x":11, "y":0},
|
||||
{"label":"k0c", "x":12, "y":0},
|
||||
{"label":"k0d", "x":13, "y":0, "w":2},
|
||||
{"label":"k0e", "x":15, "y":0},
|
||||
|
||||
{"label":"k10", "x":0, "y":1, "w":1.5},
|
||||
{"label":"k11", "x":1.5, "y":1},
|
||||
{"label":"k12", "x":2.5, "y":1},
|
||||
{"label":"k13", "x":3.5, "y":1},
|
||||
{"label":"k14", "x":4.5, "y":1},
|
||||
{"label":"k15", "x":5.5, "y":1},
|
||||
{"label":"k16", "x":6.5, "y":1},
|
||||
{"label":"k17", "x":7.5, "y":1},
|
||||
{"label":"k18", "x":8.5, "y":1},
|
||||
{"label":"k19", "x":9.5, "y":1},
|
||||
{"label":"k1a", "x":10.5, "y":1},
|
||||
{"label":"k1b", "x":11.5, "y":1},
|
||||
{"label":"k1c", "x":12.5, "y":1},
|
||||
{"label":"k1d", "x":13.5, "y":1, "w":1.5},
|
||||
{"label":"k1e", "x":15, "y":1,},
|
||||
|
||||
{"label":"k20", "x":0, "y":2, "w":1.75},
|
||||
{"label":"k21", "x":1.75, "y":2},
|
||||
{"label":"k22", "x":2.75, "y":2},
|
||||
{"label":"k23", "x":3.75, "y":2},
|
||||
{"label":"k24", "x":4.75, "y":2},
|
||||
{"label":"k25", "x":5.75, "y":2},
|
||||
{"label":"k26", "x":6.75, "y":2},
|
||||
{"label":"k27", "x":7.75, "y":2},
|
||||
{"label":"k28", "x":8.75, "y":2},
|
||||
{"label":"k29", "x":9.75, "y":2},
|
||||
{"label":"k2a", "x":10.75, "y":2},
|
||||
{"label":"k2b", "x":11.75, "y":2},
|
||||
{"label":"k2d", "x":12.75, "y":2, "w":2.25},
|
||||
{"label":"k2e", "x":15, "y":2},
|
||||
|
||||
{"label":"k30", "x":0, "y":3, "w":2.25},
|
||||
{"label":"k32", "x":2.25, "y":3},
|
||||
{"label":"k33", "x":3.25, "y":3},
|
||||
{"label":"k34", "x":4.25, "y":3},
|
||||
{"label":"k35", "x":5.25, "y":3},
|
||||
{"label":"k36", "x":6.25, "y":3},
|
||||
{"label":"k37", "x":7.25, "y":3},
|
||||
{"label":"k38", "x":8.25, "y":3},
|
||||
{"label":"k39", "x":9.25, "y":3},
|
||||
{"label":"k3a", "x":10.25, "y":3},
|
||||
{"label":"k3b", "x":11.25, "y":3},
|
||||
{"label":"k3c", "x":12.25, "y":3, "w":1.75},
|
||||
{"label":"k3d", "x":14, "y":3},
|
||||
{"label":"k3e", "x":15, "y":3},
|
||||
|
||||
{"label":"k40", "x":0, "y":4, "w":1.25},
|
||||
{"label":"k41", "x":1.25, "y":4, "w":1.25},
|
||||
{"label":"k42", "x":2.5, "y":4, "w":1.25},
|
||||
{"label":"k44", "x":3.75, "y":4, "w":6.25},
|
||||
{"label":"k49", "x":10, "y":4, "w":1.25},
|
||||
{"label":"k4a", "x":11.25, "y":4, "w":1.25},
|
||||
{"label":"k4c", "x":13, "y":4},
|
||||
{"label":"k4d", "x":14, "y":4},
|
||||
{"label":"k4e", "x":15, "y":4}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
49
keyboards/mokey/ginkgo65hot/keymaps/default/keymap.c
Normal file
49
keyboards/mokey/ginkgo65hot/keymaps/default/keymap.c
Normal file
|
@ -0,0 +1,49 @@
|
|||
/* Copyright 2021 Ocean
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
/*
|
||||
* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
|
||||
* │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │Bspace │Ins│
|
||||
* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
|
||||
* │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │Del│
|
||||
* ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
|
||||
* │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter │PgU│
|
||||
* ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
|
||||
* │ LShift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RShift│ ↑ │PgD│
|
||||
* ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
|
||||
* │LCtl│LGui│LAlt│ Space │RAlt│ Fn │ │ ← │ ↓ │ → │
|
||||
* └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
|
||||
*/
|
||||
|
||||
LAYOUT(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
|
||||
),
|
||||
LAYOUT(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
)
|
||||
};
|
50
keyboards/mokey/ginkgo65hot/keymaps/via/keymap.c
Normal file
50
keyboards/mokey/ginkgo65hot/keymaps/via/keymap.c
Normal file
|
@ -0,0 +1,50 @@
|
|||
/* Copyright 2021 Ocean
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
|
||||
),
|
||||
|
||||
[1] = LAYOUT(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______,
|
||||
BL_TOGG, BL_STEP, BL_DEC, BL_INC, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
|
||||
[2] = LAYOUT(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
|
||||
[3] = LAYOUT(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
)
|
||||
};
|
2
keyboards/mokey/ginkgo65hot/keymaps/via/rules.mk
Normal file
2
keyboards/mokey/ginkgo65hot/keymaps/via/rules.mk
Normal file
|
@ -0,0 +1,2 @@
|
|||
VIA_ENABLE = yes
|
||||
LTO_ENABLE = yes
|
20
keyboards/mokey/ginkgo65hot/readme.md
Normal file
20
keyboards/mokey/ginkgo65hot/readme.md
Normal file
|
@ -0,0 +1,20 @@
|
|||
# Ginkgo65hot Multi PCB
|
||||
|
||||
![Ginkgo65hot](https://i.imgur.com/ty0prrR.png)
|
||||
|
||||
Support Atmega32u4 keyboard,With a variety of configurations
|
||||
|
||||
* Keyboard Maintainer: [mokey](https://github.com/rhmokey)
|
||||
* Hardware Supported: Atmega32u4
|
||||
## Bootloader
|
||||
* **Physical reset button**: Short press the button on the back of the PCB to enter the Bootloader and flash the firmware
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make mokey/ginkgo65hot:default
|
||||
|
||||
Flashing example for this keyboard:
|
||||
|
||||
make mokey/ginkgo65hot:default:flash
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
18
keyboards/mokey/ginkgo65hot/rules.mk
Normal file
18
keyboards/mokey/ginkgo65hot/rules.mk
Normal file
|
@ -0,0 +1,18 @@
|
|||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
|
||||
MOUSEKEY_ENABLE = no # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = no # Enable N-Key Rollover
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||
AUDIO_ENABLE = no # Audio output
|
|
@ -75,10 +75,12 @@ bool encoder_update_user(uint8_t index, bool clockwise) {
|
|||
encoder_cw.pressed = true;
|
||||
encoder_cw.time = (timer_read() | 1);
|
||||
action_exec(encoder_cw);
|
||||
wait_ms(20);
|
||||
} else {
|
||||
encoder_ccw.pressed = true;
|
||||
encoder_ccw.time = (timer_read() | 1);
|
||||
action_exec(encoder_ccw);
|
||||
wait_ms(20);
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
|
|
@ -20,8 +20,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x0000
|
||||
#define VENDOR_ID 0x5641 // "VA"
|
||||
#define PRODUCT_ID 0x2045 // "Space E"
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER vanilla
|
||||
#define PRODUCT spacey
|
||||
|
|
48
keyboards/spacey/keymaps/via/keymap.c
Normal file
48
keyboards/spacey/keymaps/via/keymap.c
Normal file
|
@ -0,0 +1,48 @@
|
|||
/* Copyright 2021 vanilla
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Base */
|
||||
[0] = LAYOUT(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CLCK,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_UP,
|
||||
KC_LSFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT,KC_SLSH,KC_RSFT, KC_LEFT, KC_DOWN,
|
||||
KC_LCTL, KC_LGUI, MO(1), KC_MUTE, KC_LALT, KC_SPC, KC_NO, KC_BSPC, KC_DEL, KC_NO, KC_RALT, KC_RGUI, KC_RCTL, KC_RGHT
|
||||
),
|
||||
[1] = LAYOUT(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_BSPC,
|
||||
KC_TAB, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL,
|
||||
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_ENT, KC_MS_U,
|
||||
KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_COMM,KC_DOT,KC_SLSH,KC_RSFT, KC_MS_L, KC_MS_D,
|
||||
KC_LCTL, KC_LGUI, KC_NO, KC_ESC, KC_LALT, KC_SPC, KC_NO, KC_BSPC, KC_RALT, KC_NO, KC_APP, KC_RGUI, KC_RCTL, KC_MS_R
|
||||
),
|
||||
[2] = LAYOUT(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
[3] = LAYOUT(
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
)
|
||||
};
|
2
keyboards/spacey/keymaps/via/rules.mk
Normal file
2
keyboards/spacey/keymaps/via/rules.mk
Normal file
|
@ -0,0 +1,2 @@
|
|||
VIA_ENABLE = yes
|
||||
LTO_ENABLE = yes
|
139
keyboards/takashicompany/radialex/config.h
Normal file
139
keyboards/takashicompany/radialex/config.h
Normal file
|
@ -0,0 +1,139 @@
|
|||
/*
|
||||
Copyright 2021 takashicompany
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x7463 // tc = takashicompany
|
||||
#define PRODUCT_ID 0x0019
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER takashicompany
|
||||
#define PRODUCT Radialex
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 7
|
||||
#define MATRIX_COLS 7
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { B6, D4, C6, D7, E6, B4, B5 }
|
||||
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW, ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
//#define LED_NUM_LOCK_PIN B0
|
||||
//#define LED_CAPS_LOCK_PIN B1
|
||||
//#define LED_SCROLL_LOCK_PIN B2
|
||||
//#define LED_COMPOSE_PIN B3
|
||||
//#define LED_KANA_PIN B4
|
||||
|
||||
//#define BACKLIGHT_PIN B7
|
||||
//#define BACKLIGHT_LEVELS 3
|
||||
//#define BACKLIGHT_BREATHING
|
||||
|
||||
#define RGB_DI_PIN D3
|
||||
#ifdef RGB_DI_PIN
|
||||
# define RGBLED_NUM 12
|
||||
# define RGBLIGHT_HUE_STEP 8
|
||||
# define RGBLIGHT_SAT_STEP 8
|
||||
# define RGBLIGHT_VAL_STEP 8
|
||||
# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
|
||||
# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||
#define RGBLIGHT_EFFECT_BREATHING
|
||||
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||
#define RGBLIGHT_EFFECT_SNAKE
|
||||
#define RGBLIGHT_EFFECT_KNIGHT
|
||||
#define RGBLIGHT_EFFECT_CHRISTMAS
|
||||
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
||||
#define RGBLIGHT_EFFECT_RGB_TEST
|
||||
#define RGBLIGHT_EFFECT_ALTERNATING
|
||||
#define RGBLIGHT_EFFECT_TWINKLE
|
||||
#endif
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||
* This is useful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||
*/
|
||||
//#define GRAVE_ESC_CTRL_OVERRIDE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
|
||||
/* disable these deprecated features by default */
|
||||
#define NO_ACTION_MACRO
|
||||
#define NO_ACTION_FUNCTION
|
||||
|
||||
/* Bootmagic Lite key configuration */
|
||||
//#define BOOTMAGIC_LITE_ROW 0
|
||||
//#define BOOTMAGIC_LITE_COLUMN 0
|
191
keyboards/takashicompany/radialex/info.json
Normal file
191
keyboards/takashicompany/radialex/info.json
Normal file
|
@ -0,0 +1,191 @@
|
|||
{
|
||||
"keyboard_name": "Radialex",
|
||||
"url": "https://github.com/takashicompany/radialex",
|
||||
"maintainer": "takashicompany",
|
||||
"layouts": {
|
||||
"LAYOUT": {
|
||||
"layout": [
|
||||
{
|
||||
"x": 1,
|
||||
"y": 0
|
||||
},
|
||||
{
|
||||
"x": 2,
|
||||
"y": 0
|
||||
},
|
||||
{
|
||||
"x": 3,
|
||||
"y": 0
|
||||
},
|
||||
{
|
||||
"x": 4,
|
||||
"y": 0
|
||||
},
|
||||
{
|
||||
"x": 5,
|
||||
"y": 0
|
||||
},
|
||||
{
|
||||
"x": 9,
|
||||
"y": 0
|
||||
},
|
||||
{
|
||||
"x": 10,
|
||||
"y": 0
|
||||
},
|
||||
{
|
||||
"x": 11,
|
||||
"y": 0
|
||||
},
|
||||
{
|
||||
"x": 12,
|
||||
"y": 0
|
||||
},
|
||||
{
|
||||
"x": 13,
|
||||
"y": 0
|
||||
},
|
||||
{
|
||||
"x": 0,
|
||||
"y": 1
|
||||
},
|
||||
{
|
||||
"x": 1,
|
||||
"y": 1
|
||||
},
|
||||
{
|
||||
"x": 2,
|
||||
"y": 1
|
||||
},
|
||||
{
|
||||
"x": 3,
|
||||
"y": 1
|
||||
},
|
||||
{
|
||||
"x": 4,
|
||||
"y": 1
|
||||
},
|
||||
{
|
||||
"x": 5,
|
||||
"y": 1
|
||||
},
|
||||
{
|
||||
"x": 7,
|
||||
"y": 1
|
||||
},
|
||||
{
|
||||
"x": 9,
|
||||
"y": 1
|
||||
},
|
||||
{
|
||||
"x": 10,
|
||||
"y": 1
|
||||
},
|
||||
{
|
||||
"x": 11,
|
||||
"y": 1
|
||||
},
|
||||
{
|
||||
"x": 12,
|
||||
"y": 1
|
||||
},
|
||||
{
|
||||
"x": 13,
|
||||
"y": 1
|
||||
},
|
||||
{
|
||||
"x": 14,
|
||||
"y": 1
|
||||
},
|
||||
{
|
||||
"x": 0,
|
||||
"y": 2
|
||||
},
|
||||
{
|
||||
"x": 1,
|
||||
"y": 2
|
||||
},
|
||||
{
|
||||
"x": 2,
|
||||
"y": 2
|
||||
},
|
||||
{
|
||||
"x": 3,
|
||||
"y": 2
|
||||
},
|
||||
{
|
||||
"x": 4,
|
||||
"y": 2
|
||||
},
|
||||
{
|
||||
"x": 5,
|
||||
"y": 2
|
||||
},
|
||||
{
|
||||
"x": 9,
|
||||
"y": 2
|
||||
},
|
||||
{
|
||||
"x": 10,
|
||||
"y": 2
|
||||
},
|
||||
{
|
||||
"x": 11,
|
||||
"y": 2
|
||||
},
|
||||
{
|
||||
"x": 12,
|
||||
"y": 2
|
||||
},
|
||||
{
|
||||
"x": 13,
|
||||
"y": 2
|
||||
},
|
||||
{
|
||||
"x": 14,
|
||||
"y": 2
|
||||
},
|
||||
{
|
||||
"x": 2,
|
||||
"y": 3
|
||||
},
|
||||
{
|
||||
"x": 3,
|
||||
"y": 3
|
||||
},
|
||||
{
|
||||
"x": 4,
|
||||
"y": 3
|
||||
},
|
||||
{
|
||||
"x": 5,
|
||||
"y": 3
|
||||
},
|
||||
{
|
||||
"x": 6,
|
||||
"y": 3
|
||||
},
|
||||
{
|
||||
"x": 8,
|
||||
"y": 3
|
||||
},
|
||||
{
|
||||
"x": 9,
|
||||
"y": 3
|
||||
},
|
||||
{
|
||||
"x": 10,
|
||||
"y": 3
|
||||
},
|
||||
{
|
||||
"x": 11,
|
||||
"y": 3
|
||||
},
|
||||
{
|
||||
"x": 12,
|
||||
"y": 3
|
||||
}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
64
keyboards/takashicompany/radialex/keymaps/default/keymap.c
Normal file
64
keyboards/takashicompany/radialex/keymaps/default/keymap.c
Normal file
|
@ -0,0 +1,64 @@
|
|||
/* Copyright 2021 takashicompany
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
// Defines the keycodes used by our macros in process_record_user
|
||||
enum custom_keycodes {
|
||||
RADIALEX = SAFE_RANGE,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
LAYOUT(
|
||||
LT(2, KC_Q), KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,
|
||||
KC_ESC, KC_A, KC_S, LT(2, KC_D), KC_F, KC_G, RADIALEX, KC_H, KC_J, LT(2, KC_K), KC_L, KC_ENT, KC_DEL,
|
||||
KC_LSFT, SFT_T(KC_Z), GUI_T(KC_X), KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, CTL_T(KC_DOT), KC_BSPC, KC_RSFT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, ALT_T(KC_LANG2), SFT_T(KC_TAB), KC_SPC, LT(1, KC_LANG1), KC_RALT, KC_RGUI, KC_RCTL
|
||||
),
|
||||
LAYOUT(
|
||||
KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,
|
||||
KC_LCTL, CTL_T(KC_EQL), KC_LBRC, KC_SLSH, KC_MINS, KC_RO, KC_TRNS, KC_SCLN, KC_QUOT, KC_RBRC, KC_NUHS, KC_JYEN, KC_TRNS,
|
||||
KC_TRNS, SFT_T(LSFT(KC_LBRC)), LSFT(KC_LBRC), LSFT(KC_SLSH), LSFT(KC_MINS), LSFT(KC_RO), LSFT(KC_SCLN), LSFT(KC_QUOT), LSFT(KC_RBRC), LSFT(KC_NUHS), LSFT(KC_JYEN), KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
|
||||
LAYOUT(
|
||||
KC_ESC, KC_TAB, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_UP, KC_NO, KC_NO,
|
||||
KC_TRNS, KC_LCTL, KC_TRNS, KC_QUES, KC_EXLM, KC_NO, KC_TRNS, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_TRNS,
|
||||
KC_TRNS, KC_LSFT, KC_LGUI, KC_LALT, KC_LANG2, KC_TRNS, KC_TRNS, KC_LANG1, KC_NO, MO(3), KC_DEL, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
|
||||
LAYOUT(
|
||||
RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5,
|
||||
KC_TRNS, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS,
|
||||
KC_TRNS, RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, RGB_M_T, KC_F11, KC_F12, KC_CAPS, KC_NO, KC_NO, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
|
||||
};
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
switch (keycode) {
|
||||
case RADIALEX:
|
||||
if (record->event.pressed) {
|
||||
SEND_STRING("Radialex");
|
||||
rgblight_toggle();
|
||||
}
|
||||
return false;
|
||||
}
|
||||
return true;
|
||||
}
|
20
keyboards/takashicompany/radialex/keymaps/via/config.h
Normal file
20
keyboards/takashicompany/radialex/keymaps/via/config.h
Normal file
|
@ -0,0 +1,20 @@
|
|||
/*
|
||||
Copyright 2021 takashicompany
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#define DYNAMIC_KEYMAP_LAYER_COUNT 8
|
89
keyboards/takashicompany/radialex/keymaps/via/keymap.c
Normal file
89
keyboards/takashicompany/radialex/keymaps/via/keymap.c
Normal file
|
@ -0,0 +1,89 @@
|
|||
/* Copyright 2021 takashicompany
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
#define RADIALEX USER00
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
LAYOUT(
|
||||
LT(2, KC_Q), KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,
|
||||
KC_ESC, KC_A, KC_S, LT(2, KC_D), KC_F, KC_G, RADIALEX, KC_H, KC_J, LT(2, KC_K), KC_L, KC_ENT, KC_DEL,
|
||||
KC_LSFT, SFT_T(KC_Z), GUI_T(KC_X), KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, CTL_T(KC_DOT), KC_BSPC, KC_RSFT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, ALT_T(KC_LANG2), SFT_T(KC_TAB), KC_SPC, LT(1, KC_LANG1), KC_RALT, KC_RGUI, KC_RCTL
|
||||
),
|
||||
LAYOUT(
|
||||
KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,
|
||||
KC_LCTL, CTL_T(KC_EQL), KC_LBRC, KC_SLSH, KC_MINS, KC_RO, KC_TRNS, KC_SCLN, KC_QUOT, KC_RBRC, KC_NUHS, KC_JYEN, KC_TRNS,
|
||||
KC_TRNS, SFT_T(LSFT(KC_LBRC)), LSFT(KC_LBRC), LSFT(KC_SLSH), LSFT(KC_MINS), LSFT(KC_RO), LSFT(KC_SCLN), LSFT(KC_QUOT), LSFT(KC_RBRC), LSFT(KC_NUHS), LSFT(KC_JYEN), KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
|
||||
LAYOUT(
|
||||
KC_ESC, KC_TAB, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_UP, KC_NO, KC_NO,
|
||||
KC_TRNS, KC_LCTL, KC_TRNS, KC_QUES, KC_EXLM, KC_NO, KC_TRNS, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_TRNS,
|
||||
KC_TRNS, KC_LSFT, KC_LGUI, KC_LALT, KC_LANG2, KC_TRNS, KC_TRNS, KC_LANG1, KC_NO, MO(3), KC_DEL, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
|
||||
LAYOUT(
|
||||
RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5,
|
||||
KC_TRNS, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS,
|
||||
KC_TRNS, RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, RGB_M_T, KC_F11, KC_F12, KC_CAPS, KC_NO, KC_NO, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
|
||||
LAYOUT(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
|
||||
LAYOUT(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
|
||||
LAYOUT(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
|
||||
LAYOUT(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
|
||||
};
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
switch (keycode) {
|
||||
case RADIALEX:
|
||||
if (record->event.pressed) {
|
||||
SEND_STRING("Radialex");
|
||||
rgblight_toggle();
|
||||
}
|
||||
return false;
|
||||
}
|
||||
return true;
|
||||
}
|
1
keyboards/takashicompany/radialex/keymaps/via/rules.mk
Normal file
1
keyboards/takashicompany/radialex/keymaps/via/rules.mk
Normal file
|
@ -0,0 +1 @@
|
|||
VIA_ENABLE = yes
|
17
keyboards/takashicompany/radialex/radialex.c
Normal file
17
keyboards/takashicompany/radialex/radialex.c
Normal file
|
@ -0,0 +1,17 @@
|
|||
/* Copyright 2021 takashicompany
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "radialex.h"
|
42
keyboards/takashicompany/radialex/radialex.h
Normal file
42
keyboards/takashicompany/radialex/radialex.h
Normal file
|
@ -0,0 +1,42 @@
|
|||
/* Copyright 2021 takashicompany
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
/* This is a shortcut to help you visually see your layout.
|
||||
*
|
||||
* The first section contains all of the arguments representing the physical
|
||||
* layout of the board and position of the keys.
|
||||
*
|
||||
* The second converts the arguments into a two-dimensional array which
|
||||
* represents the switch matrix.
|
||||
*/
|
||||
#define LAYOUT( \
|
||||
k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, \
|
||||
k41, k11, k12, k13, k14, k15, k45, k16, k17, k18, k19, k20, k43, \
|
||||
k42, k21, k22, k23, k24, k25, k26, k27, k28, k29, k30, k44, \
|
||||
k31, k32, k33, k34, k35, k36, k37, k38, k39, k40 \
|
||||
) { \
|
||||
{ k01, k02, k03, k04, k05, k06, k07 }, \
|
||||
{ k08, k09, k10, k11, k12, k13, k14 }, \
|
||||
{ k15, k16, k17, k18, k19, k20, k21 }, \
|
||||
{ k22, k23, k24, k25, k26, k27, k28 }, \
|
||||
{ k29, k30, k31, k32, k33, k34, k35 }, \
|
||||
{ k36, k37, k38, k39, k40, k41, k42 }, \
|
||||
{ k43, k44, k45, KC_NO, KC_NO, KC_NO, KC_NO } \
|
||||
}
|
31
keyboards/takashicompany/radialex/readme.md
Normal file
31
keyboards/takashicompany/radialex/readme.md
Normal file
|
@ -0,0 +1,31 @@
|
|||
# Radialex
|
||||
|
||||
![Radialex](https://github.com/takashicompany/radialex/blob/master/images/qmk.jpg?raw=true)
|
||||
|
||||
40% larger keyboard.
|
||||
The radial key layout allows you to place your hand in a natural position and move your fingers the shortest distance to type.
|
||||
Your iconic keys and keycaps can be placed in the center of the keyboard.
|
||||
It is possible to make it shine with LED backlighting.
|
||||
The keyswitches can also be replaced with MX sockets.
|
||||
|
||||
* Keyboard Maintainer: [takashicompany](https://github.com/yourusername)
|
||||
* Hardware Supported: PCB, Pro Micro
|
||||
* Hardware Availability: https://github.com/takashicompany/radialex
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make takashicompany/radialex:default
|
||||
|
||||
Flashing example for this keyboard:
|
||||
|
||||
make takashicompany/radialex:default:flash
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
|
||||
## Bootloader
|
||||
|
||||
Enter the bootloader in 3 ways:
|
||||
|
||||
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
||||
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
||||
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
|
18
keyboards/takashicompany/radialex/rules.mk
Normal file
18
keyboards/takashicompany/radialex/rules.mk
Normal file
|
@ -0,0 +1,18 @@
|
|||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = caterina
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = no # Enable N-Key Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||
AUDIO_ENABLE = no # Audio output
|
|
@ -21,7 +21,7 @@
|
|||
#define PRODUCT_ID 0x5052 // "PR"
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Xelus
|
||||
#define PRODUCT Xelus Pachi RGB
|
||||
#define PRODUCT Xelus Pachi RGB Rev 1
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 6
|
||||
|
|
|
@ -18,10 +18,10 @@
|
|||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x5845 // "XE"
|
||||
#define PRODUCT_ID 0x5052 // "PR"
|
||||
#define PRODUCT_ID 0x5053 // "PR" + 1
|
||||
#define DEVICE_VER 0x0002
|
||||
#define MANUFACTURER Xelus
|
||||
#define PRODUCT Xelus Pachi RGB
|
||||
#define PRODUCT Xelus Pachi RGB Rev 2
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 12
|
||||
|
|
Loading…
Reference in a new issue