Keyboard: Add default keymap for dactyl_manuform 5x6 (#3649)
* mouse layer keys shifted * mouse layer keys shifted * manuform 5x6 added * mouse layer keys shifted * manuform 5x6 added * dactyl_manuform 5x6 keymap added * reorg. dactyl manuform folder * removed LAYOUTS = ortho_4x12 for 4x5 * Rows and Cols in config.h fixed * MASTER_LEFT * 5x6 matrix fixed * keymap updated * removed the i2c, serial, split_util and matrix files and inserted SPLIT_KEYBOARD * default keymap for dactyl_manuform 5x6 * Fixes for Dactyl Manuform * Add/update default keymap
This commit is contained in:
zwnk
Drashna Jaelre
parent
61b6116147
commit
feec8ad469
17 changed files with 432 additions and 232 deletions
|
|
@ -1,4 +1,4 @@
|
||||||
#include "dactyl_manuform.h"
|
#include "4x5.h"
|
||||||
|
|
||||||
|
|
||||||
#ifdef SSD1306OLED
|
#ifdef SSD1306OLED
|
||||||
|
|
@ -1,5 +1,4 @@
|
||||||
#ifndef REV2_H
|
#pragma once
|
||||||
#define REV2_H
|
|
||||||
|
|
||||||
#include "dactyl_manuform.h"
|
#include "dactyl_manuform.h"
|
||||||
|
|
||||||
|
|
@ -68,4 +67,4 @@
|
||||||
\
|
\
|
||||||
}
|
}
|
||||||
#endif
|
#endif
|
||||||
#endif
|
|
||||||
|
|
@ -16,8 +16,7 @@ You should have received a copy of the GNU General Public License
|
||||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#ifndef CONFIG_H
|
#pragma once
|
||||||
#define CONFIG_H
|
|
||||||
|
|
||||||
#include "config_common.h"
|
#include "config_common.h"
|
||||||
|
|
||||||
|
|
@ -26,7 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
#define PRODUCT_ID 0x3060
|
#define PRODUCT_ID 0x3060
|
||||||
#define DEVICE_VER 0x0001
|
#define DEVICE_VER 0x0001
|
||||||
#define MANUFACTURER tshort
|
#define MANUFACTURER tshort
|
||||||
#define PRODUCT Dactyl-Manuform
|
|
||||||
#define DESCRIPTION A split keyboard for the cheap makers
|
#define DESCRIPTION A split keyboard for the cheap makers
|
||||||
|
|
||||||
/* key matrix size */
|
/* key matrix size */
|
||||||
|
|
@ -45,53 +43,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
/* number of backlight levels */
|
/* number of backlight levels */
|
||||||
// #define BACKLIGHT_LEVELS 3
|
// #define BACKLIGHT_LEVELS 3
|
||||||
|
|
||||||
/* mouse config */
|
|
||||||
#define MOUSEKEY_INTERVAL 20
|
|
||||||
#define MOUSEKEY_DELAY 0
|
|
||||||
#define MOUSEKEY_TIME_TO_MAX 60
|
|
||||||
#define MOUSEKEY_MAX_SPEED 7
|
|
||||||
#define MOUSEKEY_WHEEL_DELAY 0
|
|
||||||
|
|
||||||
/* Set 0 if debouncing isn't needed */
|
|
||||||
#define DEBOUNCING_DELAY 5
|
|
||||||
|
|
||||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
|
||||||
#define LOCKING_SUPPORT_ENABLE
|
|
||||||
/* Locking resynchronize hack */
|
|
||||||
#define LOCKING_RESYNC_ENABLE
|
|
||||||
|
|
||||||
/* key combination for command */
|
|
||||||
#define IS_COMMAND() ( \
|
|
||||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
|
||||||
)
|
|
||||||
|
|
||||||
/* Enables This makes it easier for fast typists to use dual-function keys */
|
|
||||||
#define PERMISSIVE_HOLD
|
|
||||||
|
|
||||||
/* ws2812 RGB LED */
|
|
||||||
#define RGB_DI_PIN D3
|
|
||||||
#define RGBLIGHT_TIMER
|
|
||||||
#define RGBLED_NUM 12 // Number of LEDs
|
|
||||||
#define ws2812_PORTREG PORTD
|
|
||||||
#define ws2812_DDRREG DDRD
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Feature disable options
|
|
||||||
* These options are also useful to firmware size reduction.
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* disable debug print */
|
|
||||||
// #define NO_DEBUG
|
|
||||||
|
|
||||||
/* disable print */
|
|
||||||
// #define NO_PRINT
|
|
||||||
|
|
||||||
/* disable action features */
|
|
||||||
//#define NO_ACTION_LAYER
|
|
||||||
//#define NO_ACTION_TAPPING
|
|
||||||
//#define NO_ACTION_ONESHOT
|
|
||||||
//#define NO_ACTION_MACRO
|
|
||||||
//#define NO_ACTION_FUNCTION
|
|
||||||
|
|
||||||
|
|
||||||
#endif
|
|
||||||
|
|
|
||||||
|
|
@ -1,47 +1,3 @@
|
||||||
# MCU name
|
|
||||||
#MCU = at90usb1287
|
|
||||||
MCU = atmega32u4
|
|
||||||
|
|
||||||
# Processor frequency.
|
|
||||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
|
||||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
|
||||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
|
||||||
# automatically to create a 32-bit value in your source code.
|
|
||||||
#
|
|
||||||
# This will be an integer division of F_USB below, as it is sourced by
|
|
||||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
|
||||||
# does not *change* the processor frequency - it should merely be updated to
|
|
||||||
# reflect the processor speed set externally so that the code can use accurate
|
|
||||||
# software delays.
|
|
||||||
F_CPU = 16000000
|
|
||||||
|
|
||||||
#
|
|
||||||
# LUFA specific
|
|
||||||
#
|
|
||||||
# Target architecture (see library "Board Types" documentation).
|
|
||||||
ARCH = AVR8
|
|
||||||
|
|
||||||
# Input clock frequency.
|
|
||||||
# This will define a symbol, F_USB, in all source code files equal to the
|
|
||||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
|
||||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
|
||||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
|
||||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
|
||||||
# at the end, this will be done automatically to create a 32-bit value in your
|
|
||||||
# source code.
|
|
||||||
#
|
|
||||||
# If no clock division is performed on the input clock inside the AVR (via the
|
|
||||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
|
||||||
F_USB = $(F_CPU)
|
|
||||||
|
|
||||||
# Bootloader
|
|
||||||
# This definition is optional, and if your keyboard supports multiple bootloaders of
|
|
||||||
# different sizes, comment this out, and the correct address will be loaded
|
|
||||||
# automatically (+60). See bootloader.mk for all options.
|
|
||||||
BOOTLOADER = caterina
|
|
||||||
|
|
||||||
# Interrupt driven control endpoint task(+60)
|
|
||||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the Makefile in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
|
|
@ -59,10 +15,7 @@ AUDIO_ENABLE = no # Audio output on port C6
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||||
SUBPROJECT_rev1 = yes
|
|
||||||
USE_I2C = yes
|
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
|
|
||||||
SPLIT_KEYBOARD = yes
|
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -1,4 +1,4 @@
|
||||||
#include "dactyl_manuform.h"
|
#include "5x6.h"
|
||||||
|
|
||||||
|
|
||||||
#ifdef SSD1306OLED
|
#ifdef SSD1306OLED
|
||||||
|
|
@ -1,5 +1,4 @@
|
||||||
#ifndef REV2_H
|
#pragma once
|
||||||
#define REV2_H
|
|
||||||
|
|
||||||
#include "dactyl_manuform.h"
|
#include "dactyl_manuform.h"
|
||||||
|
|
||||||
|
|
@ -44,4 +43,4 @@
|
||||||
{ R50, R51, R52, R53, KC_NO, KC_NO }, \
|
{ R50, R51, R52, R53, KC_NO, KC_NO }, \
|
||||||
}
|
}
|
||||||
|
|
||||||
#endif
|
|
||||||
|
|
@ -16,18 +16,12 @@ You should have received a copy of the GNU General Public License
|
||||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#ifndef CONFIG_H
|
#pragma once
|
||||||
#define CONFIG_H
|
|
||||||
|
|
||||||
#include "config_common.h"
|
#include "config_common.h"
|
||||||
|
|
||||||
/* USB Device descriptor parameter */
|
|
||||||
#define VENDOR_ID 0xFEED
|
#define PRODUCT Dactyl-Manuform (5x6)
|
||||||
#define PRODUCT_ID 0x3060
|
|
||||||
#define DEVICE_VER 0x0001
|
|
||||||
#define MANUFACTURER tshort
|
|
||||||
#define PRODUCT Dactyl-Manuform
|
|
||||||
#define DESCRIPTION A split keyboard for the cheap makers
|
|
||||||
|
|
||||||
/* key matrix size */
|
/* key matrix size */
|
||||||
// Rows are doubled-up
|
// Rows are doubled-up
|
||||||
|
|
@ -45,53 +39,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
/* number of backlight levels */
|
/* number of backlight levels */
|
||||||
// #define BACKLIGHT_LEVELS 3
|
// #define BACKLIGHT_LEVELS 3
|
||||||
|
|
||||||
/* mouse config */
|
|
||||||
#define MOUSEKEY_INTERVAL 20
|
|
||||||
#define MOUSEKEY_DELAY 0
|
|
||||||
#define MOUSEKEY_TIME_TO_MAX 60
|
|
||||||
#define MOUSEKEY_MAX_SPEED 7
|
|
||||||
#define MOUSEKEY_WHEEL_DELAY 0
|
|
||||||
|
|
||||||
/* Set 0 if debouncing isn't needed */
|
|
||||||
#define DEBOUNCING_DELAY 5
|
|
||||||
|
|
||||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
|
||||||
#define LOCKING_SUPPORT_ENABLE
|
|
||||||
/* Locking resynchronize hack */
|
|
||||||
#define LOCKING_RESYNC_ENABLE
|
|
||||||
|
|
||||||
/* key combination for command */
|
|
||||||
#define IS_COMMAND() ( \
|
|
||||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
|
||||||
)
|
|
||||||
|
|
||||||
/* Enables This makes it easier for fast typists to use dual-function keys */
|
|
||||||
#define PERMISSIVE_HOLD
|
|
||||||
|
|
||||||
/* ws2812 RGB LED */
|
|
||||||
#define RGB_DI_PIN D3
|
|
||||||
#define RGBLIGHT_TIMER
|
|
||||||
#define RGBLED_NUM 12 // Number of LEDs
|
|
||||||
#define ws2812_PORTREG PORTD
|
|
||||||
#define ws2812_DDRREG DDRD
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Feature disable options
|
|
||||||
* These options are also useful to firmware size reduction.
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* disable debug print */
|
|
||||||
// #define NO_DEBUG
|
|
||||||
|
|
||||||
/* disable print */
|
|
||||||
// #define NO_PRINT
|
|
||||||
|
|
||||||
/* disable action features */
|
|
||||||
//#define NO_ACTION_LAYER
|
|
||||||
//#define NO_ACTION_TAPPING
|
|
||||||
//#define NO_ACTION_ONESHOT
|
|
||||||
//#define NO_ACTION_MACRO
|
|
||||||
//#define NO_ACTION_FUNCTION
|
|
||||||
|
|
||||||
|
|
||||||
#endif
|
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,27 @@
|
||||||
|
/*
|
||||||
|
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 2 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
|
||||||
|
#define USE_SERIAL
|
||||||
|
|
||||||
|
#define MASTER_LEFT
|
||||||
|
// #define MASTER_RIGHT
|
||||||
|
//#define EE_HANDS
|
||||||
|
// Rows are doubled-up
|
||||||
|
|
@ -0,0 +1,71 @@
|
||||||
|
#include QMK_KEYBOARD_H
|
||||||
|
|
||||||
|
|
||||||
|
extern keymap_config_t keymap_config;
|
||||||
|
|
||||||
|
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||||
|
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||||
|
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||||
|
// entirely and just use numbers.
|
||||||
|
#define _QWERTY 0
|
||||||
|
#define _LOWER 1
|
||||||
|
#define _RAISE 2
|
||||||
|
|
||||||
|
#define SFT_ESC SFT_T(KC_ESC)
|
||||||
|
#define CTL_BSPC CTL_T(KC_BSPC)
|
||||||
|
#define ALT_SPC ALT_T(KC_SPC)
|
||||||
|
#define SFT_ENT SFT_T(KC_ENT)
|
||||||
|
|
||||||
|
#define KC_ML KC_MS_LEFT
|
||||||
|
#define KC_MR KC_MS_RIGHT
|
||||||
|
#define KC_MU KC_MS_UP
|
||||||
|
#define KC_MD KC_MS_DOWN
|
||||||
|
#define KC_MB1 KC_MS_BTN1
|
||||||
|
#define KC_MB2 KC_MS_BTN1
|
||||||
|
#define RAISE MO(_RAISE)
|
||||||
|
#define LOWER MO(_LOWER)
|
||||||
|
|
||||||
|
#define _______ KC_TRNS
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
[_QWERTY] = LAYOUT_5x6(
|
||||||
|
KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 ,KC_BSPC,
|
||||||
|
KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P ,KC_MINS,
|
||||||
|
KC_LSFT, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L ,KC_SCLN,KC_QUOT,
|
||||||
|
KC_LCTL, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_BSLASH,
|
||||||
|
KC_LBRC,KC_RBRC, KC_PLUS, KC_EQL,
|
||||||
|
RAISE,KC_SPC, KC_ENT, LOWER,
|
||||||
|
KC_TAB,KC_HOME, KC_END, KC_DEL,
|
||||||
|
KC_BSPC, KC_GRV, KC_LGUI, KC_LALT
|
||||||
|
),
|
||||||
|
|
||||||
|
[_LOWER] = LAYOUT_5x6(
|
||||||
|
|
||||||
|
KC_TILD,KC_EXLM, KC_AT ,KC_HASH,KC_DLR ,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_DEL,
|
||||||
|
_______,_______,_______,_______,_______,KC_LBRC, KC_RBRC, KC_P7 , KC_P8 , KC_P9 ,_______,KC_PLUS,
|
||||||
|
_______,KC_HOME,KC_PGUP,KC_PGDN,KC_END ,KC_LPRN, KC_RPRN, KC_P4 , KC_P5 , KC_P6 ,KC_MINS,KC_PIPE,
|
||||||
|
_______,_______,_______,_______,_______,_______, _______, KC_P1 , KC_P2 , KC_P3 ,KC_EQL ,KC_UNDS,
|
||||||
|
_______,KC_PSCR, _______, KC_P0,
|
||||||
|
_______,_______, _______,_______,
|
||||||
|
_______,_______, _______,_______,
|
||||||
|
_______,_______, _______,_______
|
||||||
|
),
|
||||||
|
|
||||||
|
[_RAISE] = LAYOUT_5x6(
|
||||||
|
KC_F12 , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 ,
|
||||||
|
_______,_______,_______,_______,_______,KC_LBRC, KC_RBRC,_______,KC_NLCK,KC_INS ,KC_SLCK,KC_MUTE,
|
||||||
|
_______,KC_LEFT,KC_UP ,KC_DOWN,KC_RGHT,KC_LPRN, KC_RPRN,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_VOLU,
|
||||||
|
_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,KC_VOLD,
|
||||||
|
_______,_______, KC_EQL ,_______,
|
||||||
|
_______,_______, _______,_______,
|
||||||
|
_______,_______, _______,_______,
|
||||||
|
_______,_______, _______,_______
|
||||||
|
),
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
|
|
@ -15,6 +15,7 @@ You should have received a copy of the GNU General Public License
|
||||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
|
#pragma once
|
||||||
|
|
||||||
#define USE_SERIAL
|
#define USE_SERIAL
|
||||||
|
|
||||||
|
|
@ -22,7 +23,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
// #define MASTER_RIGHT
|
// #define MASTER_RIGHT
|
||||||
//#define EE_HANDS
|
//#define EE_HANDS
|
||||||
// Rows are doubled-up
|
// Rows are doubled-up
|
||||||
#define MATRIX_ROWS 12
|
|
||||||
#define MATRIX_COLS 6
|
|
||||||
|
|
||||||
#include "../../config.h"
|
|
||||||
|
|
|
||||||
|
|
@ -1,6 +1,4 @@
|
||||||
#include "dactyl_manuform.h"
|
#include QMK_KEYBOARD_H
|
||||||
#include "action_layer.h"
|
|
||||||
#include "eeconfig.h"
|
|
||||||
|
|
||||||
extern keymap_config_t keymap_config;
|
extern keymap_config_t keymap_config;
|
||||||
|
|
||||||
|
|
@ -33,18 +31,18 @@ extern keymap_config_t keymap_config;
|
||||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
|
||||||
|
|
||||||
[_QWERTY] = LAYOUT_5x6(
|
[_QWERTY] = LAYOUT_5x6(
|
||||||
KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 ,KC_BSPC,
|
KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 ,KC_BSPC,
|
||||||
KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P ,KC_MINS,
|
KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P ,KC_MINS,
|
||||||
KC_LSFT, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L ,KC_SCLN,KC_QUOT,
|
KC_LSFT, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L ,KC_SCLN,KC_QUOT,
|
||||||
KC_LCTL, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_BSLASH,
|
KC_LCTL, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_BSLASH,
|
||||||
KC_LBRC,KC_RBRC, KC_PLUS, KC_EQL,
|
KC_LBRC,KC_RBRC, KC_PLUS, KC_EQL,
|
||||||
RAISE,KC_SPC, KC_ENT, LOWER,
|
RAISE,KC_SPC, KC_ENT, LOWER,
|
||||||
KC_TAB,KC_HOME, KC_END, KC_DEL,
|
KC_TAB,KC_HOME, KC_END, KC_DEL,
|
||||||
KC_BSPC, KC_GRV, KC_LGUI, KC_LALT
|
KC_BSPC, KC_GRV, KC_LGUI, KC_LALT
|
||||||
),
|
),
|
||||||
|
|
||||||
[_LOWER] = LAYOUT_5x6(
|
[_LOWER] = LAYOUT_5x6(
|
||||||
KC_TILD,KC_EXLM, KC_AT ,KC_HASH,KC_DLR ,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_DEL,
|
KC_TILD,KC_EXLM, KC_AT ,KC_HASH,KC_DLR ,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_DEL,
|
||||||
_______,_______,_______,_______,_______,KC_LBRC, KC_RBRC, KC_P7 , KC_P8 , KC_P9 ,_______,KC_PLUS,
|
_______,_______,_______,_______,_______,KC_LBRC, KC_RBRC, KC_P7 , KC_P8 , KC_P9 ,_______,KC_PLUS,
|
||||||
_______,KC_HOME,KC_PGUP,KC_PGDN,KC_END ,KC_LPRN, KC_RPRN, KC_P4 , KC_P5 , KC_P6 ,KC_MINS,KC_PIPE,
|
_______,KC_HOME,KC_PGUP,KC_PGDN,KC_END ,KC_LPRN, KC_RPRN, KC_P4 , KC_P5 , KC_P6 ,KC_MINS,KC_PIPE,
|
||||||
|
|
|
||||||
|
|
@ -1,47 +1,3 @@
|
||||||
# MCU name
|
|
||||||
#MCU = at90usb1287
|
|
||||||
MCU = atmega32u4
|
|
||||||
|
|
||||||
# Processor frequency.
|
|
||||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
|
||||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
|
||||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
|
||||||
# automatically to create a 32-bit value in your source code.
|
|
||||||
#
|
|
||||||
# This will be an integer division of F_USB below, as it is sourced by
|
|
||||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
|
||||||
# does not *change* the processor frequency - it should merely be updated to
|
|
||||||
# reflect the processor speed set externally so that the code can use accurate
|
|
||||||
# software delays.
|
|
||||||
F_CPU = 16000000
|
|
||||||
|
|
||||||
#
|
|
||||||
# LUFA specific
|
|
||||||
#
|
|
||||||
# Target architecture (see library "Board Types" documentation).
|
|
||||||
ARCH = AVR8
|
|
||||||
|
|
||||||
# Input clock frequency.
|
|
||||||
# This will define a symbol, F_USB, in all source code files equal to the
|
|
||||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
|
||||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
|
||||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
|
||||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
|
||||||
# at the end, this will be done automatically to create a 32-bit value in your
|
|
||||||
# source code.
|
|
||||||
#
|
|
||||||
# If no clock division is performed on the input clock inside the AVR (via the
|
|
||||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
|
||||||
F_USB = $(F_CPU)
|
|
||||||
|
|
||||||
# Bootloader
|
|
||||||
# This definition is optional, and if your keyboard supports multiple bootloaders of
|
|
||||||
# different sizes, comment this out, and the correct address will be loaded
|
|
||||||
# automatically (+60). See bootloader.mk for all options.
|
|
||||||
BOOTLOADER = caterina
|
|
||||||
|
|
||||||
# Interrupt driven control endpoint task(+60)
|
|
||||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the Makefile in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
|
|
@ -59,9 +15,7 @@ AUDIO_ENABLE = no # Audio output on port C6
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||||
SUBPROJECT_rev1 = yes
|
|
||||||
USE_I2C = yes
|
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
|
|
||||||
SPLIT_KEYBOARD = yes
|
|
||||||
78
keyboards/handwired/dactyl_manuform/config.h
Normal file
78
keyboards/handwired/dactyl_manuform/config.h
Normal file
|
|
@ -0,0 +1,78 @@
|
||||||
|
/*
|
||||||
|
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||||
|
Copyright 2015 Jack Humbert
|
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 2 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
#include "config_common.h"
|
||||||
|
|
||||||
|
/* USB Device descriptor parameter */
|
||||||
|
#define VENDOR_ID 0xFEED
|
||||||
|
#define PRODUCT_ID 0x3060
|
||||||
|
#define DEVICE_VER 0x0001
|
||||||
|
#define MANUFACTURER tshort
|
||||||
|
// defined in subfolder
|
||||||
|
#define DESCRIPTION A split keyboard for the cheap makers
|
||||||
|
|
||||||
|
/* mouse config */
|
||||||
|
#define MOUSEKEY_INTERVAL 20
|
||||||
|
#define MOUSEKEY_DELAY 0
|
||||||
|
#define MOUSEKEY_TIME_TO_MAX 60
|
||||||
|
#define MOUSEKEY_MAX_SPEED 7
|
||||||
|
#define MOUSEKEY_WHEEL_DELAY 0
|
||||||
|
|
||||||
|
/* Set 0 if debouncing isn't needed */
|
||||||
|
#define DEBOUNCING_DELAY 5
|
||||||
|
|
||||||
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||||
|
#define LOCKING_SUPPORT_ENABLE
|
||||||
|
/* Locking resynchronize hack */
|
||||||
|
#define LOCKING_RESYNC_ENABLE
|
||||||
|
|
||||||
|
/* key combination for command */
|
||||||
|
#define IS_COMMAND() ( \
|
||||||
|
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||||
|
)
|
||||||
|
|
||||||
|
/* Enables This makes it easier for fast typists to use dual-function keys */
|
||||||
|
#define PERMISSIVE_HOLD
|
||||||
|
|
||||||
|
/* ws2812 RGB LED */
|
||||||
|
#define RGB_DI_PIN D3
|
||||||
|
#define RGBLIGHT_TIMER
|
||||||
|
#define RGBLED_NUM 12 // Number of LEDs
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Feature disable options
|
||||||
|
* These options are also useful to firmware size reduction.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* disable debug print */
|
||||||
|
// #define NO_DEBUG
|
||||||
|
|
||||||
|
/* disable print */
|
||||||
|
// #define NO_PRINT
|
||||||
|
|
||||||
|
/* disable action features */
|
||||||
|
//#define NO_ACTION_LAYER
|
||||||
|
//#define NO_ACTION_TAPPING
|
||||||
|
//#define NO_ACTION_ONESHOT
|
||||||
|
//#define NO_ACTION_MACRO
|
||||||
|
//#define NO_ACTION_FUNCTION
|
||||||
|
|
||||||
|
|
||||||
1
keyboards/handwired/dactyl_manuform/dactyl_manuform.c
Normal file
1
keyboards/handwired/dactyl_manuform/dactyl_manuform.c
Normal file
|
|
@ -0,0 +1 @@
|
||||||
|
#include "dactyl_manuform.h"
|
||||||
22
keyboards/handwired/dactyl_manuform/dactyl_manuform.h
Normal file
22
keyboards/handwired/dactyl_manuform/dactyl_manuform.h
Normal file
|
|
@ -0,0 +1,22 @@
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
|
||||||
|
#ifdef KEYBOARD_handwired_dactyl_manuform_5x6
|
||||||
|
#include "5x6.h"
|
||||||
|
#elif KEYBOARD_handwired_dactyl_manuform_4x5
|
||||||
|
#include "4x5.h"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//void promicro_bootloader_jmp(bool program);
|
||||||
|
#include "quantum.h"
|
||||||
|
|
||||||
|
|
||||||
|
#ifdef USE_I2C
|
||||||
|
#include <stddef.h>
|
||||||
|
#ifdef __AVR__
|
||||||
|
#include <avr/io.h>
|
||||||
|
#include <avr/interrupt.h>
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
142
keyboards/handwired/dactyl_manuform/readme.md
Normal file
142
keyboards/handwired/dactyl_manuform/readme.md
Normal file
|
|
@ -0,0 +1,142 @@
|
||||||
|
Dactyl Manuform 5x6
|
||||||
|
======
|
||||||
|
the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link.
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
## First Time Setup
|
||||||
|
|
||||||
|
Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using:
|
||||||
|
|
||||||
|
```
|
||||||
|
$ make handwired/dactyl_manuform/5x6:YOUR_KEYMAP_NAME
|
||||||
|
```
|
||||||
|
|
||||||
|
If everything worked correctly you will see a file:
|
||||||
|
|
||||||
|
```
|
||||||
|
dactyl_manuform_5x6_YOUR_KEYMAP_NAME.hex
|
||||||
|
```
|
||||||
|
|
||||||
|
For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/docs/faq_keymap.md) in the main readme.md.
|
||||||
|
|
||||||
|
## Keymaps
|
||||||
|
Currently there are only two keymaps: Qwerty and Dvorak, feel free to make changes and contribute your keymap.
|
||||||
|
### Impstyle
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
Required Hardware
|
||||||
|
-----------------
|
||||||
|
|
||||||
|
Apart from diodes and key switches for the keyboard matrix in each half, you
|
||||||
|
will need:
|
||||||
|
|
||||||
|
* 2 Arduino Pro Micros. You can find these on AliExpress for ≈3.50USD each.
|
||||||
|
* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable
|
||||||
|
|
||||||
|
Alternatively, you can use any sort of cable and socket that has at least 3
|
||||||
|
wires. If you want to use I2C to communicate between halves, you will need a
|
||||||
|
cable with at least 4 wires and 2x 4.7kΩ pull-up resistors
|
||||||
|
|
||||||
|
Optional Hardware
|
||||||
|
-----------------
|
||||||
|
A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`.
|
||||||
|
|
||||||
|
Wiring
|
||||||
|
------
|
||||||
|
|
||||||
|
The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e.
|
||||||
|
PD0 on the ATmega32u4) between the two Pro Micros.
|
||||||
|
|
||||||
|
Next, wire your key matrix to any of the remaining 17 IO pins of the pro micro
|
||||||
|
and modify the `matrix.c` accordingly.
|
||||||
|
|
||||||
|
The wiring for serial:
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
The wiring for i2c:
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
The pull-up resistors may be placed on either half. It is also possible
|
||||||
|
to use 4 resistors and have the pull-ups in both halves, but this is
|
||||||
|
unnecessary in simple use cases.
|
||||||
|
|
||||||
|
You can change your configuration between serial and i2c by modifying your `config.h` file.
|
||||||
|
|
||||||
|
Notes on Software Configuration
|
||||||
|
-------------------------------
|
||||||
|
|
||||||
|
the keymaps in here are for the 4x5 layout of the keyboard only.
|
||||||
|
|
||||||
|
Flashing
|
||||||
|
-------
|
||||||
|
From the top level `qmk_firmware` directory run `make KEYBOARD:KEYMAP:avrdude` for automatic serial port resolution and flashing.
|
||||||
|
Example: `make lets_split/rev2:default:avrdude`
|
||||||
|
|
||||||
|
|
||||||
|
Choosing which board to plug the USB cable into (choosing Master)
|
||||||
|
--------
|
||||||
|
Because the two boards are identical, the firmware has logic to differentiate the left and right board.
|
||||||
|
|
||||||
|
It uses two strategies to figure things out: looking at the EEPROM (memory on the chip) or looking if the current board has the usb cable.
|
||||||
|
|
||||||
|
The EEPROM approach requires additional setup (flashing the eeprom) but allows you to swap the usb cable to either side.
|
||||||
|
|
||||||
|
The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra.
|
||||||
|
|
||||||
|
### Setting the left hand as master
|
||||||
|
If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set.
|
||||||
|
|
||||||
|
### Setting the right hand as master
|
||||||
|
If you always plug the usb cable into the right board, add an extra flag to your `config.h`
|
||||||
|
```
|
||||||
|
#define MASTER_RIGHT
|
||||||
|
```
|
||||||
|
|
||||||
|
### Setting EE_hands to use either hands as master
|
||||||
|
If you define `EE_HANDS` in your `config.h`, you will need to set the
|
||||||
|
EEPROM for the left and right halves.
|
||||||
|
|
||||||
|
The EEPROM is used to store whether the
|
||||||
|
half is left handed or right handed. This makes it so that the same firmware
|
||||||
|
file will run on both hands instead of having to flash left and right handed
|
||||||
|
versions of the firmware to each half. To flash the EEPROM file for the left
|
||||||
|
half run:
|
||||||
|
```
|
||||||
|
avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep
|
||||||
|
// or the equivalent in dfu-programmer
|
||||||
|
|
||||||
|
```
|
||||||
|
and similarly for right half
|
||||||
|
```
|
||||||
|
avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep
|
||||||
|
// or the equivalent in dfu-programmer
|
||||||
|
```
|
||||||
|
|
||||||
|
NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`)
|
||||||
|
|
||||||
|
After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash.
|
||||||
|
|
||||||
|
Note that you need to program both halves, but you have the option of using
|
||||||
|
different keymaps for each half. You could program the left half with a QWERTY
|
||||||
|
layout and the right half with a Colemak layout using bootmagic's default layout option.
|
||||||
|
Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the
|
||||||
|
right half is connected.
|
||||||
|
|
||||||
|
|
||||||
|
Notes on Using Pro Micro 3.3V
|
||||||
|
-----------------------------
|
||||||
|
|
||||||
|
Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects
|
||||||
|
the frequency on the 3.3V board.
|
||||||
|
|
||||||
|
Also, if the slave board is producing weird characters in certain columns,
|
||||||
|
update the following line in `matrix.c` to the following:
|
||||||
|
|
||||||
|
```
|
||||||
|
// _delay_us(30); // without this wait read unstable value.
|
||||||
|
_delay_us(300); // without this wait read unstable value.
|
||||||
|
```
|
||||||
66
keyboards/handwired/dactyl_manuform/rules.mk
Normal file
66
keyboards/handwired/dactyl_manuform/rules.mk
Normal file
|
|
@ -0,0 +1,66 @@
|
||||||
|
# MCU name
|
||||||
|
#MCU = at90usb1287
|
||||||
|
MCU = atmega32u4
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||||
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||||
|
# automatically to create a 32-bit value in your source code.
|
||||||
|
#
|
||||||
|
# This will be an integer division of F_USB below, as it is sourced by
|
||||||
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||||
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
|
# software delays.
|
||||||
|
F_CPU = 16000000
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Bootloader
|
||||||
|
# This definition is optional, and if your keyboard supports multiple bootloaders of
|
||||||
|
# different sizes, comment this out, and the correct address will be loaded
|
||||||
|
# automatically (+60). See bootloader.mk for all options.
|
||||||
|
BOOTLOADER = caterina
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task(+60)
|
||||||
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
|
# the appropriate keymap folder that will get included automatically
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
|
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
|
MIDI_ENABLE = no # MIDI controls
|
||||||
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
|
UNICODE_ENABLE = no # Unicode
|
||||||
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||||
|
|
||||||
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
|
|
||||||
|
SPLIT_KEYBOARD = yes
|
||||||
Loading…
Reference in a new issue