1
0
Fork 0

[Keyboard] Zen keyboard update for Rev2 (#5522)

* Updated Zen keyboard for rev2 support

* Fixing r1 compile errors

* PR feedback and changes for Proton-C compile errors
This commit is contained in:
XScorpion2 2019-04-15 00:29:50 -04:00 committed by Drashna Jaelre
parent 4974683040
commit ffc82ebdb2
37 changed files with 663 additions and 988 deletions

View file

@ -0,0 +1,239 @@
// This is the SOL 6x8 font
#pragma once
#ifdef __AVR__
#include <avr/io.h>
#include <avr/pgmspace.h>
#elif defined(ESP8266)
#include <pgmspace.h>
#else
#define PROGMEM
#endif
static const unsigned char font[] PROGMEM = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x00,
0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
0xFC, 0x18, 0x24, 0x24, 0x18, 0x00,
0x18, 0x24, 0x24, 0x18, 0xFC, 0x00,
0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00,
0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00,
0x00, 0x00, 0x00, 0x00, 0x80, 0x00,
0x00, 0x00, 0x00, 0x80, 0x80, 0x80,
0x00, 0x00, 0x00, 0x00, 0x80, 0x80,
0x80, 0x80, 0x80, 0x80, 0x80, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x80, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x80, 0x00, 0x00, 0x0C, 0x90,
0xB0, 0xE0, 0x72, 0x31, 0x9B, 0xDE,
0xCE, 0xEC, 0xEE, 0xE9, 0xE9, 0xEC,
0xCF, 0xDA, 0x99, 0x3E, 0x62, 0xE4,
0xC4, 0x70, 0x10, 0x10, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x60,
0xC0, 0xC0, 0x80, 0x80, 0x02, 0x85,
0x85, 0x87, 0x85, 0x89, 0x89, 0x92,
0xEA, 0xC6, 0xC4, 0x48, 0x50, 0x60,
0x40, 0x40, 0x40, 0x40, 0xC0, 0xE0,
0x50, 0x28, 0x10, 0x10, 0x60, 0xC0,
0x40, 0x40, 0x40, 0x40, 0x80, 0x80,
0x80, 0x80, 0x80, 0xE0, 0xF8, 0xFC,
0xF8, 0xF0, 0x00, 0x00, 0x00, 0x00,
0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC,
0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00,
0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E,
0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00,
0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B,
0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00,
0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE,
0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00,
0x00, 0x00, 0x00, 0xE0, 0xEC, 0xDF,
0xFC, 0xE0, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x7F, 0x80, 0x80,
0x80, 0x70, 0x0F, 0x00, 0x00, 0x80,
0x7F, 0x00, 0x00, 0x7F, 0x80, 0x80,
0x80, 0x80, 0x80, 0x80, 0x80, 0x7F,
0x00, 0x00, 0x80, 0x80, 0x80, 0x80,
0x80, 0x80, 0x80, 0xFF, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x40, 0x21, 0x33, 0x3B, 0x7B,
0xFF, 0x00, 0x7C, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF, 0x7C, 0x01,
0xFF, 0xDE, 0x8C, 0x04, 0x0C, 0x08,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x01, 0x01, 0x01, 0x7F, 0x80,
0x80, 0xBE, 0xBE, 0x80, 0x80, 0x80,
0xC1, 0xFF, 0x80, 0x04, 0x32, 0x5E,
0x1C, 0x3D, 0x26, 0x10, 0xC1, 0xFF,
0x3E, 0x00, 0x00, 0x08, 0x36, 0xC1,
0x08, 0x08, 0x14, 0x77, 0x94, 0x94,
0x94, 0xF7, 0x94, 0xF7, 0x9C, 0x9C,
0xFF, 0xFF, 0x1E, 0x00, 0x00, 0x00,
0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F,
0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00,
0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F,
0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00,
0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20,
0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00,
0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F,
0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00,
0x40, 0x7C, 0x3F, 0x3F, 0x23, 0x01,
0x23, 0x3F, 0x37, 0x6C, 0x40, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x06, 0x02, 0x06,
0x4D, 0x4F, 0x8C, 0xF9, 0x73, 0x37,
0x27, 0x2F, 0x2F, 0xAF, 0xEF, 0x6F,
0x77, 0x17, 0x33, 0x79, 0xCC, 0x1F,
0x31, 0x20, 0x21, 0x02, 0x02, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x40, 0xE0,
0xA0, 0xA0, 0xD0, 0x90, 0x48, 0x48,
0x25, 0x2B, 0x11, 0x09, 0x05, 0x03,
0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
0x01, 0x03, 0x02, 0x04, 0x03, 0x01,
0x01, 0x01, 0x01, 0x01, 0x01, 0x00,
0x00, 0x00, 0x00, 0x03, 0x0F, 0x1F,
0x0F, 0x03, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
};

View file

@ -15,17 +15,6 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#pragma once
#include "config_common.h"
#endif // CONFIG_H
#undef RGBLED_NUM
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 16
#ifndef TAPPING_TERM
#define TAPPING_TERM 100
#endif

View file

@ -1,3 +0,0 @@
RGBLIGHT_ENABLE = yes
BACKLIGHT_ENABLE = yes

View file

@ -1,3 +0,0 @@
RGBLIGHT_ENABLE = yes
BACKLIGHT_ENABLE = yes

View file

@ -1,3 +0,0 @@
RGBLIGHT_ENABLE = yes
BACKLIGHT_ENABLE = yes

View file

@ -1,466 +0,0 @@
/*
Copyright 2017 Danny Nguyen <danny@keeb.io>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* scan matrix
*/
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include "wait.h"
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#include "split_util.h"
#include "pro_micro.h"
#include "config.h"
#include "timer.h"
#include "backlight.h"
#ifdef USE_I2C
# include "i2c.h"
#else // USE_SERIAL
# include "serial.h"
#endif
#ifndef DEBOUNCING_DELAY
# define DEBOUNCING_DELAY 5
#endif
#if (DEBOUNCING_DELAY > 0)
static uint16_t debouncing_time;
static bool debouncing = false;
#endif
#if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n")
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
# define matrix_bitpop(i) bitpop(matrix[i])
# define ROW_SHIFTER ((uint8_t)1)
#else
# error "Currently only supports 8 COLS"
#endif
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
#define ERROR_DISCONNECT_COUNT 5
#define SERIAL_LED_ADDR 0x00
#define ROWS_PER_HAND (MATRIX_ROWS/2)
static uint8_t error_count = 0;
static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
#if (DIODE_DIRECTION == COL2ROW)
static void init_cols(void);
static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
static void unselect_rows(void);
static void select_row(uint8_t row);
static void unselect_row(uint8_t row);
#elif (DIODE_DIRECTION == ROW2COL)
static void init_rows(void);
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
static void unselect_cols(void);
static void unselect_col(uint8_t col);
static void select_col(uint8_t col);
#endif
__attribute__ ((weak))
void matrix_init_kb(void) {
matrix_init_user();
}
__attribute__ ((weak))
void matrix_scan_kb(void) {
matrix_scan_user();
}
__attribute__ ((weak))
void matrix_init_user(void) {
}
__attribute__ ((weak))
void matrix_scan_user(void) {
}
inline
uint8_t matrix_rows(void)
{
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void)
{
return MATRIX_COLS;
}
void matrix_init(void)
{
debug_enable = true;
debug_matrix = true;
debug_mouse = true;
// initialize row and col
unselect_rows();
init_cols();
TX_RX_LED_INIT;
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
matrix_debouncing[i] = 0;
}
matrix_init_quantum();
}
uint8_t _matrix_scan(void)
{
int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
#if (DIODE_DIRECTION == COL2ROW)
// Set row, read cols
for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
# if (DEBOUNCING_DELAY > 0)
bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row);
if (matrix_changed) {
debouncing = true;
debouncing_time = timer_read();
}
# else
read_cols_on_row(matrix+offset, current_row);
# endif
}
#elif (DIODE_DIRECTION == ROW2COL)
// Set col, read rows
for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
# if (DEBOUNCING_DELAY > 0)
bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col);
if (matrix_changed) {
debouncing = true;
debouncing_time = timer_read();
}
# else
read_rows_on_col(matrix+offset, current_col);
# endif
}
#endif
# if (DEBOUNCING_DELAY > 0)
if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
matrix[i+offset] = matrix_debouncing[i+offset];
}
debouncing = false;
}
# endif
return 1;
}
#ifdef USE_I2C
// Get rows from other half over i2c
int i2c_transaction(void) {
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
if (err) goto i2c_error;
// start of matrix stored at 0x00
err = i2c_master_write(0x00);
if (err) goto i2c_error;
// Start read
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
if (err) goto i2c_error;
if (!err) {
int i;
for (i = 0; i < ROWS_PER_HAND-1; ++i) {
matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
}
matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
i2c_master_stop();
} else {
i2c_error: // the cable is disconnceted, or something else went wrong
i2c_reset_state();
return err;
}
return 0;
}
#else // USE_SERIAL
int serial_transaction(void) {
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
if (serial_update_buffers()) {
return 1;
}
for (int i = 0; i < ROWS_PER_HAND; ++i) {
matrix[slaveOffset+i] = serial_slave_buffer[i];
}
#ifdef BACKLIGHT_ENABLE
// Write backlight level for slave to read
serial_master_buffer[SERIAL_LED_ADDR] = get_backlight_level();
#endif
return 0;
}
#endif
uint8_t matrix_scan(void)
{
uint8_t ret = _matrix_scan();
#ifdef USE_I2C
if( i2c_transaction() ) {
#else // USE_SERIAL
if( serial_transaction() ) {
#endif
// turn on the indicator led when halves are disconnected
TXLED1;
error_count++;
if (error_count > ERROR_DISCONNECT_COUNT) {
// reset other half if disconnected
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
for (int i = 0; i < ROWS_PER_HAND; ++i) {
matrix[slaveOffset+i] = 0;
}
}
} else {
// turn off the indicator led on no error
TXLED0;
error_count = 0;
}
matrix_scan_quantum();
return ret;
}
void matrix_slave_scan(void) {
_matrix_scan();
int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
#ifdef USE_I2C
for (int i = 0; i < ROWS_PER_HAND; ++i) {
i2c_slave_buffer[i] = matrix[offset+i];
}
#else // USE_SERIAL
for (int i = 0; i < ROWS_PER_HAND; ++i) {
serial_slave_buffer[i] = matrix[offset+i];
}
#ifdef BACKLIGHT_ENABLE
// Read backlight level sent from master and update level on slave
backlight_set(serial_master_buffer[SERIAL_LED_ADDR]);
#endif
#endif
}
bool matrix_is_modified(void)
{
if (debouncing) return false;
return true;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & ((matrix_row_t)1<<col));
}
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print("\nr/c 0123456789ABCDEF\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
phex(row); print(": ");
pbin_reverse16(matrix_get_row(row));
print("\n");
}
}
uint8_t matrix_key_count(void)
{
uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
count += bitpop16(matrix[i]);
}
return count;
}
#if (DIODE_DIRECTION == COL2ROW)
static void init_cols(void)
{
for(uint8_t x = 0; x < MATRIX_COLS; x++) {
uint8_t pin = col_pins[x];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
}
static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
{
// Store last value of row prior to reading
matrix_row_t last_row_value = current_matrix[current_row];
// Clear data in matrix row
current_matrix[current_row] = 0;
// Select row and wait for row selecton to stabilize
select_row(current_row);
wait_us(30);
// For each col...
for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
// Select the col pin to read (active low)
uint8_t pin = col_pins[col_index];
uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
// Populate the matrix row with the state of the col pin
current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index);
}
// Unselect row
unselect_row(current_row);
return (last_row_value != current_matrix[current_row]);
}
static void select_row(uint8_t row)
{
uint8_t pin = row_pins[row];
_SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT
_SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
}
static void unselect_row(uint8_t row)
{
uint8_t pin = row_pins[row];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
static void unselect_rows(void)
{
for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
uint8_t pin = row_pins[x];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
}
#elif (DIODE_DIRECTION == ROW2COL)
static void init_rows(void)
{
for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
uint8_t pin = row_pins[x];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
}
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
{
bool matrix_changed = false;
// Select col and wait for col selecton to stabilize
select_col(current_col);
wait_us(30);
// For each row...
for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++)
{
// Store last value of row prior to reading
matrix_row_t last_row_value = current_matrix[row_index];
// Check row pin state
if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
{
// Pin LO, set col bit
current_matrix[row_index] |= (ROW_SHIFTER << current_col);
}
else
{
// Pin HI, clear col bit
current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
}
// Determine if the matrix changed state
if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
{
matrix_changed = true;
}
}
// Unselect col
unselect_col(current_col);
return matrix_changed;
}
static void select_col(uint8_t col)
{
uint8_t pin = col_pins[col];
_SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT
_SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
}
static void unselect_col(uint8_t col)
{
uint8_t pin = col_pins[col];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
static void unselect_cols(void)
{
for(uint8_t x = 0; x < MATRIX_COLS; x++) {
uint8_t pin = col_pins[x];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
}
#endif

View file

@ -2,19 +2,26 @@
A split ergo keyboard with a few goals in mind:
- Be as thin as possible. Other split KBs (Let's Split, Nyquist, Iris) are 15.2mm thick. The Zen is only 8.0mm thick.
- Be as thin as possible. Other split KBs (Let's Split, Nyquist, Iris) are 15.2mm thick. The Zen rev2 is only 13.2mm thick *including switches and caps* when using Kailh Choc low-profile switches, and 22.1mm using standard MX switches and DSA keycaps.
- Layout designed for gaming. 1.5u pinky keys, ortho alphas, and angled thumb keys. After trying Ortholinear, Atreus62, and Ergodox, this is the best layout for gaming and typing.
- RGB backlighting. 16 WS2812b LEDs shine through the perimeter switches. The SK6812 variant are cheap and easy to solder.
- Per-key RGB lighting. 34 WS2812b LEDs per side make it exceptionally bright
- Price. Using Arduino Pro Micro, SK6812 LEDs, and PCB FR4 for the case, the cost of each half without switches or caps can be reduced to under $20 when purchased at volume.
- Options. The Zen rev2 comes with rotary encoder support, SSD1306 OLED pinout, USB-C or TRRS interconnect, and jumpers to enable compatibility with the [QMK Proton-C](https://olkb.com/parts/qmk-proton-c) and the [Keeb.io Elite-C](https://keeb.io/products/elite-c-usb-c-pro-micro-replacement-arduino-compatible-atmega32u4)
Keyboard Maintainer: [Legonut](https://github.com/Legonut)
Hardware Supported: Zen rev1
Keyboard Maintainer: [Legonut](https://github.com/Legonut)
Hardware Supported: Zen rev1, Zen rev2
Hardware Availability: [RGBKB.net](https://www.rgbkb.net/)
A build guide and more info for this keyboard can be found here: [Zen Build Guide](https://legonut.gitbooks.io/zen-keyboard/content/).
A build guide and more info for this keyboard can be found here: [Zen Build Guide](https://rgbkb.gitbook.io/sol-build-guide/zygomorph-build-guide/untitled).
Make example for this keyboard (after setting up your build environment):
make zen/rev1:default
make zen/rev2:default
To build for a Proton-C:
make zen/rev2:default CTPC=yes
**Note:** The Proton-C does not have split keyboard, or encoder support. Also OLED driver support is untested. Will update as status changes.
See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.

View file

@ -15,15 +15,12 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef REV1_CONFIG_H
#define REV1_CONFIG_H
#include QMK_KEYBOARD_CONFIG_H
#pragma once
/* USB Device descriptor parameter */
#define VENDOR_ID 0xCEEB
#define PRODUCT_ID 0x1256
#define DEVICE_VER 0x0200
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x3060
#define DEVICE_VER 0x0001
#define MANUFACTURER Legonut
#define PRODUCT Project Zen
#define DESCRIPTION Split gaming keyboard
@ -40,12 +37,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
#define SOFT_SERIAL_PIN D0
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
// #define BACKLIGHT_LEVELS 3
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5
@ -54,9 +50,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
#define BACKLIGHT_PIN F4
#define BACKLIGHT_LEVELS 5
/* ws2812 RGB LED */
#define RGB_DI_PIN D1
@ -79,5 +72,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif

View file

@ -1,5 +1,4 @@
RGBLIGHT_ENABLE = yes
BACKLIGHT_ENABLE = no
NKRO_ENABLE = yes
KEY_LOCK_ENABLE = yes
TAP_DANCE_ENABLE = yes

View file

@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#pragma once
#include "config_common.h"
@ -37,5 +36,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#endif

View file

@ -0,0 +1 @@
RGBLIGHT_ENABLE = yes

View file

@ -0,0 +1 @@
RGBLIGHT_ENABLE = yes

View file

@ -1,8 +1,8 @@
#include QMK_KEYBOARD_H
#include "kageurufu.h"
#ifdef PROTOCOL_LUFA
#include "lufa.h"
#include "split_util.h"
#include "lufa.h"
#include "split_util.h"
#endif
extern keymap_config_t keymap_config;

View file

@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#pragma once
#include "config_common.h"
@ -31,5 +30,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#endif

View file

@ -0,0 +1 @@
RGBLIGHT_ENABLE = yes

View file

@ -1,5 +1,4 @@
#ifndef REV1_H
#define REV1_H
#pragma once
#include "zen.h"
@ -36,5 +35,3 @@
{ k80, k81, k82, k83, k84, k85, KC_NO }, \
{ k90, k91, k92, k93, k94, k95, k96 } \
}
#endif

View file

@ -1,2 +0,0 @@
RGBLIGHT_ENABLE = yes
BACKLIGHT_ENABLE = yes

View file

@ -0,0 +1,98 @@
/*
Copyright 2017 Danny Nguyen <danny@hexwire.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x3061
#define DEVICE_VER 0x0002
#define MANUFACTURER Legonut
#define PRODUCT "Project Zen"
#define DESCRIPTION "Split gaming keyboard"
/* key matrix size */
// Rows are doubled-up
// wiring of each half
#ifdef CONVERT_TO_PROTON_C
#define MATRIX_ROWS 5
#define MATRIX_COLS 7
#else
#define MATRIX_ROWS 10
#define MATRIX_COLS 7
#endif
// Proton-C does pin conversion
#define MATRIX_ROW_PINS { C6, E6, B5, D7, B4 }
#define MATRIX_COL_PINS { F4, F5, F6, F7, B3, B1, B2 }
#define NUMBER_OF_ENCODERS 1
#define ENCODERS_PAD_A { D4 }
#define ENCODERS_PAD_B { D2 }
#define RGB_DI_PIN B6
#define SOFT_SERIAL_PIN D3
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* ws2812 RGB LED */
#define RGBLED_NUM 34 // Number of LEDs
// If using 90 Degree rotation, increase block cout
#ifdef OLED_ROTATE90
#define OLED_DISPLAY_CUSTOM
#define OLED_DISPLAY_WIDTH 128
#define OLED_DISPLAY_HEIGHT 32
#define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 512 (compile time mathed)
#define OLED_BLOCK_TYPE uint16_t // Type to use for segmenting the oled display for smart rendering, use unsigned types only
#define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 8 (compile time mathed)
#define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 32 (compile time mathed)
#define OLED_SOURCE_MAP { 0, 8, 16, 24 }
#define OLED_TARGET_MAP { 24, 16, 8, 0 }
#endif
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
// #define NO_DEBUG
/* disable print */
// #define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION

View file

@ -0,0 +1,19 @@
#include QMK_KEYBOARD_H
#include <stdio.h>
// extern keymap_config_t keymap_config;
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { { { KC_TRNS } } };
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
static char buf[10] = " ";
if (record->event.pressed) {
snprintf(buf, 10, "C%dR%d ", record->event.key.col, record->event.key.row);
send_string(buf);
}
return false;
return true;
}

View file

@ -0,0 +1,117 @@
#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _QWERTY 0
#define _NAV 2
enum custom_keycodes {
QWERTY = SAFE_RANGE,
NAV,
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Qwerty
* ,-----------------------------------------. .-----------------------------------------.
* | GESC | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Bksp |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Tab | Q | W | E | R | T | | Y | U | I | O | P | \ |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* |CAPS(NAV)|A | S | D | F | G | | H | J | K | L | ; | " |
* |------+------+------+------+------+------+------..------+------+------+------+------+------+------|
* | Shift| Z | X | C | V | B |RGBPrv||RGBNxt| N | M | , | . | / |Enter |
* |------+------+------+------+------+------+------||------+------+------+------+------+------+------|
* | Ctrl | GUI | Alt |RGBTOG| NAV |Space |Delete||Enter |Space | NAV | - | = | PGUP | PGDN |
* `----------------------------------+-------------''------------------------------------------------'
* |Space |Delete||Enter |Space |
* '-------------''-------------'
*/
[_QWERTY] = LAYOUT( \
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, \
LT(_NAV, KC_CAPS),KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, RGB_RMOD,RGB_MOD, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, \
KC_LCTL, KC_LGUI, KC_LALT, RGB_TOG, MO(_NAV), KC_SPC, KC_DEL, KC_ENT, KC_SPACE, MO(_NAV), KC_MINS, KC_EQL, KC_PGUP, KC_PGDN, \
KC_SPC, KC_DEL, KC_ENT, KC_SPACE \
),
/* NAV
* ,-----------------------------------------. .-----------------------------------------.
* | GESC | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Bksp |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Tab | Q | W | E | R | T | | Y | U | I | O | P | \ |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* |CAPS(NAV)|A | S | D | F | G | | H | J | K | L | ; | " |
* |------+------+------+------+------+------+------..------+------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | || | N | M | , | . | / |Enter |
* |------+------+------+------+------+------+------||------+------+------+------+------+------+------|
* | Ctrl | GUI | Alt |RGBTOG| NAV |Space |Delete||Enter |Space | NAV | - | = | PGUP | PGDN |
* `----------------------------------+-------------''------------------------------------------------'
* |Space |Delete||Enter |Space |
* '-------------''-------------'
*/
[_NAV] = LAYOUT( \
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
_______, RGB_SAI, RGB_VAI, RGB_SAD, RESET, KC_LBRC, KC_RBRC, KC_PGUP, KC_UP, KC_PGDN, KC_INS, KC_HOME, \
_______, RGB_HUD, RGB_VAD, RGB_HUI, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_DEL, KC_END, \
KC_LSFT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MPRV, KC_MNXT, \
KC_LCTL, KC_LGUI, KC_LALT, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLU, KC_VOLD, \
_______, _______, _______, _______
),
};
void encoder_update_user(uint8_t index, bool clockwise) {
if (index == 0) { /* First encoder */
if (clockwise) {
tap_code(KC_PGDN);
} else {
tap_code(KC_PGUP);
}
} else if (index == 1) { /* Second encoder from slave */
if (clockwise) {
tap_code(KC_UP);
} else {
tap_code(KC_DOWN);
}
}
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
set_single_persistent_default_layer(1UL<<_QWERTY);
}
return false;
break;
//case COLEMAK:
//if (record->event.pressed) {
//set_single_persistent_default_layer(1UL<<_COLEMAK);
//}
//return false;
//break;
}
return true;
}
#if OLED_DRIVER_ENABLE
const char* layer_name_user(uint32_t layer) {
switch (layer) {
case _QWERTY:
return PSTR("QWRTY");
case _NAV:
return PSTR("NAV\n");
default:
return PSTR("UNDEF");
}
}
#endif

66
keyboards/zen/rev2/rev2.c Normal file
View file

@ -0,0 +1,66 @@
#include "rev2.h"
#ifdef OLED_DRIVER_ENABLE
#include "split_util.h"
#include "oled_driver.h"
__attribute__((weak))
void render_logo(void) {
static const char PROGMEM sol_logo[] = {
0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0};
oled_write_P(sol_logo, false);
}
__attribute__((weak))
const char* layer_name_user(uint32_t layer) {
switch (layer) {
default:
return PSTR("UNDEF\n");
}
}
__attribute__((weak))
void render_status(void) {
// Setup for 90 degree rendering because it's awesome!
// It can house 16 lines of text, with 5 letters each line
// Render to mode icon
static const char PROGMEM mode_logo[2][4] = {
{0x97,0x98,0x0a,0},
{0xb7,0xb8,0x0a,0} };
oled_write_P(mode_logo[0], false); // Line 1
oled_write_P(mode_logo[1], false); // Line 2
// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
oled_set_cursor(0, 3); // Line 3
oled_write_P(PSTR("Layer"), false); // Line 4
oled_write_P(layer_name_user(biton32(layer_state)), false);
// Host Keyboard LED Status
uint8_t led_usb_state = host_keyboard_leds();
oled_set_cursor(0, OLED_MAX_LINES - 4); // Line 13
oled_write_P(led_usb_state & (1<<USB_LED_NUM_LOCK) ? PSTR("NUMLK") : PSTR(" "), false); // Line 14
oled_write_P(led_usb_state & (1<<USB_LED_CAPS_LOCK) ? PSTR("CAPLK") : PSTR(" "), false); // Line 15
oled_write_P(led_usb_state & (1<<USB_LED_SCROLL_LOCK) ? PSTR("SCRLK") : PSTR(" "), false); // Line 16
}
#ifdef OLED_ROTATE90
bool oled_init_user(bool flip180) {
return true;
}
#endif
__attribute__((weak))
void oled_task_user(void) {
if (is_keyboard_master()) {
render_status();
} else {
render_logo();
oled_scroll_left();
}
}
#endif

56
keyboards/zen/rev2/rev2.h Normal file
View file

@ -0,0 +1,56 @@
#pragma once
#include "zen.h"
//void promicro_bootloader_jmp(bool program);
#include "quantum.h"
#ifdef USE_I2C
#include <stddef.h>
#ifdef __AVR__
#include <avr/io.h>
#include <avr/interrupt.h>
#endif
#endif
//void promicro_bootloader_jmp(bool program);
#ifdef CONVERT_TO_PROTON_C
#define LAYOUT( \
k00, k01, k02, k03, k04, k05, k55, k54, k53, k52, k51, k50, \
k10, k11, k12, k13, k14, k15, k65, k64, k63, k62, k61, k60, \
k20, k21, k22, k23, k24, k25, k75, k74, k73, k72, k71, k70, \
k30, k31, k32, k33, k34, k35, k16, k66, k85, k84, k83, k82, k81, k80, \
k40, k41, k42, k43, k44, k36, k26, k76, k86, k94, k93, k92, k91, k90, \
k45, k46, k96, k95 \
) \
{ \
{ k00, k01, k02, k03, k04, k05, KC_NO }, \
{ k10, k11, k12, k13, k14, k15, k16 }, \
{ k20, k21, k22, k23, k24, k25, k26 }, \
{ k30, k31, k32, k33, k34, k35, k36 }, \
{ k40, k41, k42, k43, k44, k45, k46 } \
}
#else
#define LAYOUT( \
k00, k01, k02, k03, k04, k05, k55, k54, k53, k52, k51, k50, \
k10, k11, k12, k13, k14, k15, k65, k64, k63, k62, k61, k60, \
k20, k21, k22, k23, k24, k25, k75, k74, k73, k72, k71, k70, \
k30, k31, k32, k33, k34, k35, k16, k66, k85, k84, k83, k82, k81, k80, \
k40, k41, k42, k43, k44, k36, k26, k76, k86, k94, k93, k92, k91, k90, \
k45, k46, k96, k95 \
) \
{ \
{ k00, k01, k02, k03, k04, k05, KC_NO }, \
{ k10, k11, k12, k13, k14, k15, k16 }, \
{ k20, k21, k22, k23, k24, k25, k26 }, \
{ k30, k31, k32, k33, k34, k35, k36 }, \
{ k40, k41, k42, k43, k44, k45, k46 }, \
{ k50, k51, k52, k53, k54, k55, KC_NO }, \
{ k60, k61, k62, k63, k64, k65, k66 }, \
{ k70, k71, k72, k73, k74, k75, k76 }, \
{ k80, k81, k82, k83, k84, k85, k86 }, \
{ k90, k91, k92, k93, k94, k95, k96 } \
}
#endif

View file

@ -0,0 +1,14 @@
ENCODER_ENABLE = yes
OLED_DRIVER_ENABLE = no
OLED_ROTATE90 = yes
# Setup so that OLED and 90 degree rotation can be turned on/off easily
# with "OLED_DRIVER_ENABLE = yes" or "OLED_ROTATE90 = no" in user's rules.mk file
ifeq ($(strip $(OLED_DRIVER_ENABLE)), yes)
# Custom local font file
OPT_DEFS += -DOLED_FONT_H=\"common/glcdfont.c\"
ifeq ($(strip $(OLED_DRIVER_ENABLE)), yes)
OPT_DEFS += -DOLED_ROTATE90
endif
endif

View file

@ -1,52 +1,27 @@
SRC += matrix.c \
split_util.c \
serial.c
# MCU name
#MCU = at90usb1287
# Pro Micro or Elite-C
# Automagically converted to Proton-C
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
# Interrupt driven control endpoint task(+60)
BOOTLOADER = dfu
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
ifeq ($(strip $(CTPC)), yes)
CONVERT_TO_PROTON_C=yes
endif
ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes)
SPLIT_KEYBOARD = no # currently unsupported on ARM
RGBLIGHT_ENABLE = no # currently unsupported on ARM
EXTRAFLAGS += -DUSE_PROTON_C
else
# Currently moved to Pro Micro only section because of lack of Proton-C support
SPLIT_KEYBOARD = yes
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
endif
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
@ -57,17 +32,11 @@ EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
SUBPROJECT_rev1 = yes
USE_I2C = no
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
CUSTOM_MATRIX = yes
DEFAULT_FOLDER = zen/rev1
DEFAULT_FOLDER = zen/rev2

View file

@ -1,228 +0,0 @@
/*
* WARNING: be careful changing this code, it is very timing dependent
*/
#ifndef F_CPU
#define F_CPU 16000000
#endif
#include <avr/io.h>
#include <avr/interrupt.h>
#include <util/delay.h>
#include <stdbool.h>
#include "serial.h"
#ifndef USE_I2C
// Serial pulse period in microseconds. Its probably a bad idea to lower this
// value.
#define SERIAL_DELAY 24
uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
#define SLAVE_DATA_CORRUPT (1<<0)
volatile uint8_t status = 0;
inline static
void serial_delay(void) {
_delay_us(SERIAL_DELAY);
}
inline static
void serial_output(void) {
SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
}
// make the serial pin an input with pull-up resistor
inline static
void serial_input(void) {
SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK;
SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
}
inline static
uint8_t serial_read_pin(void) {
return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
}
inline static
void serial_low(void) {
SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
}
inline static
void serial_high(void) {
SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
}
void serial_master_init(void) {
serial_output();
serial_high();
}
void serial_slave_init(void) {
serial_input();
// Enable INT0
EIMSK |= _BV(INT0);
// Trigger on falling edge of INT0
EICRA &= ~(_BV(ISC00) | _BV(ISC01));
}
// Used by the master to synchronize timing with the slave.
static
void sync_recv(void) {
serial_input();
// This shouldn't hang if the slave disconnects because the
// serial line will float to high if the slave does disconnect.
while (!serial_read_pin());
serial_delay();
}
// Used by the slave to send a synchronization signal to the master.
static
void sync_send(void) {
serial_output();
serial_low();
serial_delay();
serial_high();
}
// Reads a byte from the serial line
static
uint8_t serial_read_byte(void) {
uint8_t byte = 0;
serial_input();
for ( uint8_t i = 0; i < 8; ++i) {
byte = (byte << 1) | serial_read_pin();
serial_delay();
_delay_us(1);
}
return byte;
}
// Sends a byte with MSB ordering
static
void serial_write_byte(uint8_t data) {
uint8_t b = 8;
serial_output();
while( b-- ) {
if(data & (1 << b)) {
serial_high();
} else {
serial_low();
}
serial_delay();
}
}
// interrupt handle to be used by the slave device
ISR(SERIAL_PIN_INTERRUPT) {
sync_send();
uint8_t checksum = 0;
for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
serial_write_byte(serial_slave_buffer[i]);
sync_send();
checksum += serial_slave_buffer[i];
}
serial_write_byte(checksum);
sync_send();
// wait for the sync to finish sending
serial_delay();
// read the middle of pulses
_delay_us(SERIAL_DELAY/2);
uint8_t checksum_computed = 0;
for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
serial_master_buffer[i] = serial_read_byte();
sync_send();
checksum_computed += serial_master_buffer[i];
}
uint8_t checksum_received = serial_read_byte();
sync_send();
serial_input(); // end transaction
if ( checksum_computed != checksum_received ) {
status |= SLAVE_DATA_CORRUPT;
} else {
status &= ~SLAVE_DATA_CORRUPT;
}
}
inline
bool serial_slave_DATA_CORRUPT(void) {
return status & SLAVE_DATA_CORRUPT;
}
// Copies the serial_slave_buffer to the master and sends the
// serial_master_buffer to the slave.
//
// Returns:
// 0 => no error
// 1 => slave did not respond
int serial_update_buffers(void) {
// this code is very time dependent, so we need to disable interrupts
cli();
// signal to the slave that we want to start a transaction
serial_output();
serial_low();
_delay_us(1);
// wait for the slaves response
serial_input();
serial_high();
_delay_us(SERIAL_DELAY);
// check if the slave is present
if (serial_read_pin()) {
// slave failed to pull the line low, assume not present
sei();
return 1;
}
// if the slave is present syncronize with it
sync_recv();
uint8_t checksum_computed = 0;
// receive data from the slave
for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
serial_slave_buffer[i] = serial_read_byte();
sync_recv();
checksum_computed += serial_slave_buffer[i];
}
uint8_t checksum_received = serial_read_byte();
sync_recv();
if (checksum_computed != checksum_received) {
sei();
return 1;
}
uint8_t checksum = 0;
// send data to the slave
for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
serial_write_byte(serial_master_buffer[i]);
sync_recv();
checksum += serial_master_buffer[i];
}
serial_write_byte(checksum);
sync_recv();
// always, release the line when not in use
serial_output();
serial_high();
sei();
return 0;
}
#endif

View file

@ -1,26 +0,0 @@
#ifndef MY_SERIAL_H
#define MY_SERIAL_H
#include "config.h"
#include <stdbool.h>
/* TODO: some defines for interrupt setup */
#define SERIAL_PIN_DDR DDRD
#define SERIAL_PIN_PORT PORTD
#define SERIAL_PIN_INPUT PIND
#define SERIAL_PIN_MASK _BV(PD0)
#define SERIAL_PIN_INTERRUPT INT0_vect
#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
#define SERIAL_MASTER_BUFFER_LENGTH 1
// Buffers for master - slave communication
extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
void serial_master_init(void);
void serial_slave_init(void);
int serial_update_buffers(void);
bool serial_slave_data_corrupt(void);
#endif

View file

@ -1,41 +0,0 @@
#include <stdint.h>
#include <stdbool.h>
#include "split_util.h"
#include "progmem.h"
#include "print.h"
#include "rgblight.h"
#ifdef USE_I2C
# include "i2c.h"
#else // USE_SERIAL
# include "serial.h"
#endif
rgblight_config_t rgblight_config;
void rgblight_slave_update(void) {
//rgblight_effect_christmas();
}
void rgblight_set(void) {
if (rgblight_config.enable) {
#ifdef RGBW
ws2812_setleds_rgbw(led, RGBLED_NUM);
#else
ws2812_setleds(led, RGBLED_NUM);
#endif
} else {
for (uint8_t i = 0; i < RGBLED_NUM; i++) {
led[i].r = 0;
led[i].g = 0;
led[i].b = 0;
}
#ifdef RGBW
ws2812_setleds_rgbw(led, RGBLED_NUM);
#else
ws2812_setleds(led, RGBLED_NUM);
#endif
}
}

View file

@ -1,6 +0,0 @@
#ifndef SPLIT_RGB_H
#define SPLIT_RGB_H
void rgblight_slave_update(void);
#endif

View file

@ -1,86 +0,0 @@
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/power.h>
#include <avr/interrupt.h>
#include <util/delay.h>
#include <avr/eeprom.h>
#include "split_util.h"
#include "matrix.h"
#include "keyboard.h"
#include "config.h"
#include "timer.h"
#ifdef USE_I2C
# include "i2c.h"
#else
# include "serial.h"
#endif
volatile bool isLeftHand = true;
static void setup_handedness(void) {
#ifdef EE_HANDS
isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
#else
// I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
#if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
isLeftHand = !has_usb();
#else
isLeftHand = has_usb();
#endif
#endif
}
static void keyboard_master_setup(void) {
#ifdef USE_I2C
i2c_master_init();
#ifdef SSD1306OLED
matrix_master_OLED_init ();
#endif
#else
serial_master_init();
#endif
}
static void keyboard_slave_setup(void) {
timer_init();
#ifdef USE_I2C
i2c_slave_init(SLAVE_I2C_ADDRESS);
#else
serial_slave_init();
#endif
}
bool has_usb(void) {
USBCON |= (1 << OTGPADE); //enables VBUS pad
_delay_us(5);
return (USBSTA & (1<<VBUS)); //checks state of VBUS
}
void split_keyboard_setup(void) {
setup_handedness();
if (has_usb()) {
keyboard_master_setup();
} else {
keyboard_slave_setup();
}
sei();
}
void keyboard_slave_loop(void) {
matrix_init();
while (1) {
matrix_slave_scan();
}
}
// this code runs before the usb and keyboard is initialized
void matrix_setup(void) {
split_keyboard_setup();
if (!has_usb()) {
keyboard_slave_loop();
}
}

View file

@ -1,20 +0,0 @@
#ifndef SPLIT_KEYBOARD_UTIL_H
#define SPLIT_KEYBOARD_UTIL_H
#include <stdbool.h>
#include "eeconfig.h"
#define SLAVE_I2C_ADDRESS 0x32
extern volatile bool isLeftHand;
// slave version of matix scan, defined in matrix.c
void matrix_slave_scan(void);
void split_keyboard_setup(void);
bool has_usb(void);
void keyboard_slave_loop(void);
void matrix_master_OLED_init (void);
#endif

View file

@ -1,7 +1,8 @@
#ifndef ZEN_H
#define ZEN_H
#include "rev1.h"
#include "quantum.h"
#pragma once
#if KEYBOARD_zen_rev1
#include "rev1.h"
#elif KEYBOARD_zen_rev2
#include "rev2.h"
#endif
#include "quantum.h"