Nulo/qmk_firmware
1
0
Fork 0
Code Releases Activity
qmk_firmware/keyboards/3w6/rev2
History
Ryan 764dc18a81
Remove NO_ACTION_MACRO and NO_ACTION_FUNCTION from keyboard config.h (#16655)
2022-03-15 13:56:58 +00:00
..
keymaps/default_pimoroni Remove default pointing device driver. (#16190) 2022-02-05 14:29:15 +00:00
config.h Remove NO_ACTION_MACRO and NO_ACTION_FUNCTION from keyboard config.h (#16655) 2022-03-15 13:56:58 +00:00
matrix.c Fixes for recent i2c migrations (#14352) 2021-09-08 15:44:18 -07:00
readme.md [Keyboard] add 3w6 (#13746) 2021-08-19 11:13:00 -07:00
rev2.c [Keyboard] Add swap hands support for 3w6 rev2 (#15230) 2021-11-29 00:23:09 -08:00
rev2.h [Keyboard] add 3w6 (#13746) 2021-08-19 11:13:00 -07:00
rules.mk Tidy up NKRO_ENABLE rules (#15382) 2021-12-09 16:05:44 +11:00

readme.md

3W6

3W6_rev2 3W6_rev2

The 3w6 is a low profile, split ortholinear keyboard with 36 keys.

  • Rev2:
    • onboard microcontroller (ATMega32U4)
    • USB-C connector Board <-> PC
    • USB-C connectors between both split halfs
    • choc spacing (18x17mm)
    • aggressive pinky stagger
    • support for Choc V1 switches
    • files for midplate (1.6 to 2mm)
    • support for Pimoroni Trackball instead of outer thumb switch on right half, needs midplate
    • mounting holes for Tenting Puck, only usable without mid or switchplate
  • Keyboard Maintainer: weteor
  • Hardware Supported:
    • 3w6 rev2 (with Pimoroni support)
  • Hardware Availability:

To reach the bootloader, connect the board to the PC and push the reset button on left half.

Make examples for this keyboard (after setting up your build environment):

make 3w6/rev2:default
make 3w6/rev2:default_pimoroni

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.