Jonathan Rascher 93bc737a8f

[Keymap] Update bcat's keymaps/userspace to share logic, add OLED functionality, and set up one of my macropads for WFH (#14702 )

* Add script to build all bcat keymaps at once

* Move userspace RGB to separate source file

* Move layer handling logic into userspace

* Move keycap aliases into userspace

* Add OLED userspace library and Lily58 OLED setup

* Add Luna keyboard pet, generic OLED pet framework

Luna artwork and original implementation by HellSingCoder, licensed
under GPL v2.0.

See also: 6dfe915e26/keyboards/sofle/keymaps/helltm/keymap.c

* Use OLED on bcat's Crkbd

I had to turn off a few unused features to address firmware size limits.

* Remove vestigial NK_TOGG keybindings

* Add post-render hook to OLED pet API

This enables OLED pets to draw custom widgets (e.g., LED indicator
status) on top of their animation frames.

* Add Isda keyboard pet

For future use on my Unicorne keyboard. Unicorn artwork by sparrow666,
licensed under GPL v2.0.

See also: https://opengameart.org/content/unicorn-2

* Replace OLED timeout implementation with custom

The default implementation never lets the OLED turn off if a continuous
animation is in progress. The custom one does.

* Move keyboard state for OLED functions into struct

No change in firmware size, but makes keymaps read a little nicer and
enables more functionality in OLED pets.

* Enable continuously running OLED pet (for Luna)

* Sync OLED state; enable Bootmagic only when needed

The new extensible split transport for Split Common finally allows OLED
on/off status to be synced between halves of the keyboard. :)

Unfortunately, this required disabling Bootmagic Lite to keep my Crkbd
under the firmware size limit. (I now after 28 bytes free on avr-gcc
version 8.5.0.) So now I'll enable Bootmagic only on keyboards that
actually require it, i.e., ones lacking an accessible reset button.

* Update 9-Key macropad keymap for working from home

* Remove includes redundant with quantum.h

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Simplify BCAT_OLED_PET makefile logic

* Swap some keys on my 9-Key macropad around

* Inline spurious variable in OLED code

* Remove max brightness that's now set by default

The default max brightness is only 120 rather than 150, but that might
actually fix some weirdness I've seen with bright white LED settings.

* Enable specific RGBLIGHT modes instead of default

The general trend these days seems to be enabling only the modes you
want, so I'm manually expanding the ones currently enabled by
RGBLIGHT_ANIMATIONS.

I'd like to try out the TWINKLE mode too, but it seems not to work at
all on ARM right now, and all my usable RGBLIGHT keebs are ARM boards.

* Reenable RGB_MATRIX animations after #15018

My Crkbd still has a reasonable amount of free space with these:
27974/28672 (97%, 698 bytes free). The RGB_MATRIX_KEYPRESSES effects
would put it over the firmware size limit, but I really don't ever use
those anyway.

* Use new get_u8_str function for WPM display

Co-authored-by: Drashna Jaelre <drashna@live.com>

2021-12-27 14:46:00 +11:00

1.6 KiB

Raw Permalink Blame History

bcat's Eco layout

This is a cute little 4x14 ortholinear keyboard. I've set it up using an unsplit, ortho version of my split 3x6 + 3 thumb keys (Crkbd) layout, with the following changes:

The alpha keys are separated by an extra two columns in the middle to provide a little more hand separation, similar to a split keyboard.
The top three rows of the extra middle columns feature navigation keys and brackets/braces. I don't really use dedicated keys for these, but I had the keycaps, so I figured I may as well put them there.
I have a Left Alt and Right Super key on the bottom row just like my Lily58.
The two keys in each bottom corner are unbound, as is the 2U spacebar in the center of the bottom row. These keys are too inconvenient to reach, and there's nothing really useful to bind them to anyway.