Nulo/qmk_firmware
1
0
Fork 0
Code Releases Activity
qmk_firmware/users/miles2go/keymaps/handwired/ms_sculpt_mobile/keymap.c
milestogo 803610a284
[Keymap] initial user directory for milestogo + babblepaste (#7698) 
* initial user directory

* fix missing endif in vi mode

* fix includes per drashna and a few typos. I have not tested the userspace keymap, it is just there to help keep the user space and keymap in sync

* move babblepaste docs to md format

* clean up block quotes

* TIL clang-format - miles2go userspace
2020-05-08 23:15:26 -07:00

463 lines
18 KiB
C
Raw Permalink Blame History

//placeholder until the new keymaps tree is built
//#include QMK_KEYBOARD_H
#include "virtser.h"
#include <print.h>
#include "milestogo.h"
#define LAYOUT_local LAYOUT_mobile_XUW
#define LAYOUT LAYOUT_mobile_XUW
#ifndef USERSPACE_ACTIVE
enum layer_keycodes {
QWR = SAFE_RANGE,
CDH,
SYM,
MOV,
NUM,
TRAN
};
enum layer_names {
_QWR,
_CDH,
_SYM,
_MOV,
_TRAN
};
#endif
// Shorter spacing
#define XXXX KC_NO
#define ____ KC_TRNS
// Custom macros
/* Fn Keys */
#define TT_SYM MO(_SYM)
#define TT_NUM MO(_NUM)
#define SSFT ACTION_MODS_ONESHOT(MOD_LSFT)
#define SSYM LT(_SYM, KC_SPC)
#define MVTAB LT(_MOV,KC_TAB)
#define BKMV TT(_MOV)
#define MV2 LT(_MOV, KC_2)
#define MV3 LT(_MOV, KC_3)
#define MV4 LT(_MOV, KC_4)
#define MV8 LT(_MOV, KC_8)
#define MV9 LT(_MOV, KC_9)
#define MV0 LT(_MOV, KC_0)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* QWERTY
*
* |ESC | F1 | F2 | F3 | F4 | F5 | F6 | f7 | F8 | F9 | F10| F11| F12|Vol-|Vol+|_CDH|
* -------------------------------------------------------------------------------'
* | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = |Bakspace| Del|
* ---------------------------------------------------------------------------
* | tab | q | w | e | r | t | y | u | i | o | p | [ | ] | \ | |
* -------------------------------------------------------------------------------'
* |Bak/Mov| a | s | d | f | g | h | j | k | l | ; | ' | enter |PgUp|
* --------------------------------------------------------------------------------
* |Lsft | z | x | c | v | b | n | m | , | . | / | Rsft| Up| PgDn|
* ---------------------------------------------------------------------------------
* |Lctl |Lgui |Lalt | Space/Sym | GUI | Sym | Rctl |Left|Down|Rght|
* ---------------------------------------------------------------------------------
*/
[_QWERTY] = LAYOUT_local( \
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_VOLD, KC_VOLU, TG(_CDH),\
KC_GRAVE, KC_1, KC_2, KC_3 ,KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,\
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,KC_BSLS,\
BKMV, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,\
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT,KC_SLSH,KC_RSFT, KC_UP, KC_PGDN,\
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, TT_SYM,KC_CDH, KC_LEFT, KC_DOWN, KC_RIGHT
),
[_CDH] = LAYOUT_local(\
____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \
KC_GRAVE, KC_1, KC_2, KC_3 ,KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS, KC_EQL, KC_BSPC, KC_DEL,\
KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, ____, ____, ____,\
KC_LCTL, KC_A, KC_R, KC_S, KC_T, KC_G, KC_M, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT, KC_2,\
KC_LSFT, KC_Z, KC_X, KC_C, DHPASTE,KC_V, KC_K, KC_H, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, ____, KC_1,\
TG(_MOV), ____, ____ , ____, ____, ____, KC_QWERTY, ____, ____, ____
),
/* SYMBOL layer, several to chose from
*/
[_SYM] = LAYOUT_wrapper(\
____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \
____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \
____, _________________EXCEL_L1__________________, _________________EXCEL_R1__________________, ____, ____, ____,\
____, _________________EXCEL_L2__________________, _________________EXCEL_R2__________________, KC_GRV, ____, ____,\
____, _________________EXCEL_L3__________________, _________________EXCEL_R3__________________, B_SAVE, ____, ____,\
____, ____, ____, ____, ____, ____, ____, ____, ____, ____
),
#ifndef USE_BABLPASTE
[_MOV] = LAYOUT_local(\
____, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, ____ , \
____, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, \
____, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, KC_UP, XXXX, XXXX, XXXX, XXXX, XXXX, \
____, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, KC_LEFT, KC_DOWN, KC_RIGHT,XXXX, XXXX, XXXX, XXXX, \
____, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, \
____, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX
)
#else
/* MOVE babble version version
* |ESC | MAC|Read|Linx| VI | | | | | | | | | | | |
* -------------------------------------------------------------------------------'
* | | | - | = |Bakspace| Del|
* ---------------------------------------------------------------------------
* | tab | | [ | ] | \ | |
* -------------------------------------------------------------------------------'
* |Bak/Mov| | ' |Launch App |PgUp|
* ---------------------------------------------------------------------------------
* |Lsft | | Rsft| Up| PgDn|
* ---------------------------------------------------------------------------------
* | |Lgui |Lalt | Exit Move Mode | GUI | Sym | Rctl |Left|Down|Rght|
* ---------------------------------------------------------------------------------
*/
/* ,--------------------------------------------. ,--------------------------------------------.
* 01 | ESC |FindPrev| Find |FindNext| \n cell| |ParStart|LineStrt| Up | EOL | ParEnd |
* |--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------|
* 02 | SelA | Do_DEL | Shift | Undo |Hsplit+ | | WrdLft | Left | Down | Right | WrdRght|
* |--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------|
* 03 |Vspli+ | Cut | Copy | Paste | Paste | | WinPrv | Tab-- | NewTab | Tab++ | WinNxt |
* `--------------------------------------------' `--------------------------------------------'
*/
[_MOV] = LAYOUT_wrapper(\
____, ____________BABBLE_SWITCH_L________________, ____________BABBLE_SWITCH_R________________, XXXX, XXXX, XXXX, XXXX, ____, \
____, ____________BABBLE_MOV_LNUM________________, ____________BABBLE_MOV_RNUM________________, XXXX, XXXX, XXXX, XXXX,\
____, ____________BABBLE_MOV_L1__________________, ____________BABBLE_MOV_R1__________________, XXXX, XXXX, XXXX, \
____, ____________BABBLE_MOV_L2__________________, ____________BABBLE_MOV_R2__________________, XXXX, B_RUNAPP, XXXX,\
____, ____________BABBLE_MOV_L3__________________, ____________BABBLE_MOV_R2__________________, XXXX, XXXX, XXXX, \
____, ____, ____, TG(_MOV), XXXX, XXXX, XXXX, XXXX, XXXX, XXXX
),
// Move in a direction, deleting as we go, or do opposite of Mov layer action */
/* ,--------------------------------------------. ,--------------------------------------------.
* 01 | Esc | |Replace |MultiSel|PasteVal| | . |LineStrt| . | EOL | . |
* |--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------|
* 02 | | Do_Mov | Shift | Redo |Hsplit- | | WrdLft | Left | . | Right | WrdRght|
* |--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------|
* 03 |Vsplit- | Cut | Copy | Paste |Paste | | App-- | ZoomOut| NewWin | ZoomIn | App+ |
* `--------------------------------------------' `--------------------------------------------'
*/
[_DMOV] = LAYOUT_wrapper(\
____, ____________BABBLE_SWITCH_L________________, ____________BABBLE_SWITCH_R________________, XXXX, XXXX, XXXX, ____, \
____, ____________BABBLE_MOV_LNUM________________, ____________BABBLE_MOV_RNUM________________, XXXX, XXXX, XXXX, XXXX, \
____, _________BABBLE_DELMOV_L1__________________ , _________BABBLE_DELMOV_R1__________________ , XXXX, XXXX, XXXX, \
____, _________BABBLE_DELMOV_L2__________________ , _________BABBLE_DELMOV_R2__________________ , XXXX, XXXX, XXXX,\
____, _________BABBLE_DELMOV_L3__________________ , _________BABBLE_DELMOV_R3__________________ , XXXX, XXXX, XXXX, \
____, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX, XXXX
),
#endif // Bablepaste
/*
[_TRAN] = LAYOUT_local(\
____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \
____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \
____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \
____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \
____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, \
____, ____, ____, ____, ____, ____, ____, ____, ____, ____
)
*/
};
#ifndef USERSPACE_ACTIVE
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWR:
if (record->event.pressed) {
layer_off(_CDH);
}
return false;
break;
case CDH:
if (record->event.pressed) {
layer_on(_CDH);
}
return false;
break;
case SYM:
if (record->event.pressed) {
layer_on(_SYM);
} else {
layer_off(_SYM);
}
return false;
break;
case SAVE:
if (record->event.pressed) {
SEND_STRING(SS_LCTL("s"));
}
return false;
break;
/* Colemak mod-dh moves the D key to the qwerty V position
This hack makes apple-V_position do what I mean */
case DHPASTE:
if(get_mods() & MOD_BIT(KC_LGUI) ) {
if (record->event.pressed) {
clear_keyboard_but_mods();
register_code(KC_V);
} else {
unregister_code(KC_V);
}
} else {
if (record->event.pressed) {
register_code(KC_D);
} else {
unregister_code(KC_D);
}
}
return false;
break;
return false;
break;
}
return true;
}
#endif
void keyboard_post_init_user(void) {
// Customise these values to desired behaviour
// debug_enable=true;
//debug_matrix=true;
//debug_keyboard=true;
//debug_mouse=true;
}
void matrix_init_user(void) {
#ifdef RGBLIGHT_ENABLE
#ifdef RGB_DI_PIN
rgblight_setrgb(RGB_GREEN);
#endif
#endif //RGB_matrix
}
// Runs whenever there is a layer state change.
layer_state_t layer_state_set_user(layer_state_t state) {
uint8_t layer = get_highest_layer(state);
switch (layer) {
case 0:
#ifdef RGBLIGHT_COLOR_LAYER_0
rgblight_setrgb(RGBLIGHT_COLOR_LAYER_0);
#else
#ifdef RGBLIGHT_ENABLE
rgblight_init();
#endif
#endif
break;
case 1:
#ifdef RGBLIGHT_COLOR_LAYER_1
rgblight_setrgb(RGBLIGHT_COLOR_LAYER_1);
#endif
break;
case 2: // symbol
#ifdef RGBLIGHT_COLOR_LAYER_2
rgblight_setrgb(RGBLIGHT_COLOR_LAYER_2);
#endif
break;
case 3: // move
#ifdef RGBLIGHT_COLOR_LAYER_3
rgblight_setrgb(RGBLIGHT_COLOR_LAYER_3);
#endif
#ifdef USE_BABLPASTE
babble_led_user(); // poke led to update
#endif // bablepaste
break;
case 4: //delmove ideally we'd turn on a red pixel in addition to the layer indicator.
#ifdef RGBLIGHT_COLOR_LAYER_4
rgblight_setrgb(RGBLIGHT_COLOR_LAYER_4);
#endif
break;
case 5:
#ifdef RGBLIGHT_COLOR_LAYER_5
rgblight_setrgb(RGBLIGHT_COLOR_LAYER_5);
#endif
break;
default:
break;
}
#ifdef VIRTSER_ENABLE
//virtser_send(layer + 48); // ascii 0 is 48
#endif
return state;
};
// custom tapping term lengths.
uint16_t get_tapping_term(uint16_t keycode) {
switch (keycode) {
case LT(_MOV, KC_TAB):
return TAPPING_TERM ;
break;
default:
return TAPPING_TERM;
}
}
#ifdef VIRTSER_ENABLE
/* listen on serial for commands. Either a set of lower case letters mapped to colors,
/ or upper case letters that change RGB mode.
/ special command C takes 3 numbers as arguments, terminated with a newline or comma or excess digits.
Command C takes 3-5octets of RGB settings. Numbers can be terminated with a comma or period.
3 octets = set all LED, 4th argument specfies specfic LED, 4+5 specify start and stop LEDs.
*/
uint8_t ser_rgbByte[18] ; //ascii string
uint8_t ser_cmd_started =0 ; // are we in process
uint8_t ser_got_RGBbytes =0 ; // how many bytes we've recived.
uint8_t rgb_r[6]; // R, g, b, P1, p2
uint8_t bs=0; // how many bytes into our rgbBytestring.
void virtser_recv(uint8_t serIn) {
#ifdef RGBLIGHT_ENABLE
if ((serIn == 10 ) || (serIn == 13) || ser_got_RGBbytes >=5) { //reached newline or max digits
if (ser_cmd_started) {
ser_cmd_started =0 ; // end loop at newline
virtser_send('|');
if (ser_got_RGBbytes==3) {
rgblight_setrgb( rgb_r[0], rgb_r[1], rgb_r[2]);
}
if (ser_got_RGBbytes ==4) {
if (( rgb_r[3] >=0) && (rgb_r[3] <= RGBLED_NUM) ) { // is pos1 plausible
rgblight_setrgb_at ( rgb_r[0], rgb_r[1], rgb_r[2], rgb_r[3]);
} else {
rgblight_setrgb( rgb_r[0], rgb_r[1], rgb_r[2]);
}
}
if (ser_got_RGBbytes == 5) { // are start and end positions plausible?
if ( (rgb_r[4] >0) && (rgb_r[4] <= RGBLED_NUM) && (rgb_r[4] > rgb_r[3]) &&
(rgb_r[3] >=0) && (rgb_r[3] <= (RGBLED_NUM -1)) ) {
rgblight_setrgb_range(rgb_r[0], rgb_r[1], rgb_r[2], rgb_r[3], rgb_r[4]);
} else {
rgblight_setrgb( rgb_r[0], rgb_r[1], rgb_r[2]);
}
}
} else { // newline outside of command loop, or something that can be ignored.
//virtser_send('.');
}
}
if (1 == ser_cmd_started) { // collecting bytes.
if ( // it is time to compute a byte
( ( (serIn == ',') || (serIn == '.') ) && (bs > 0) ) || // signal done with the byte.
(bs ==2 )){ //or we know this is last.
if ( (serIn <= '9') && (serIn >='0') ) { //3rd asci digit
ser_rgbByte[bs] = serIn;
bs++;
// virtser_send(serIn);
}
if (bs>3) {
rgb_r[ser_got_RGBbytes]=255;
ser_got_RGBbytes ++;
}
if (bs==3) {
rgb_r[ser_got_RGBbytes] = (ser_rgbByte[0] -'0')*100 + (ser_rgbByte[1] -'0')*10 + (ser_rgbByte[2] -'0' );
ser_got_RGBbytes ++;
}
if (bs ==2 ) {
rgb_r[ser_got_RGBbytes] = (ser_rgbByte[0] -'0')*10 + (ser_rgbByte[1] -'0' );
ser_got_RGBbytes ++;
}
if (bs ==1) {
rgb_r[ser_got_RGBbytes] = (ser_rgbByte[0] -'0');
ser_got_RGBbytes ++;
} // {else wipe & start over}
bs=0;
// virtser_send(ser_got_RGBbytes+'0');
} else { // haven't got enough for our byte / no terminal marker
if ( (serIn <= '9') && (serIn >='0') ) { //ascii only
ser_rgbByte[bs] = serIn;
bs++;
// virtser_send(serIn);
}
}
} else { //not in command loop - next is command w/o arguments, or start of one.
switch (serIn) {
case 'C': // color switch
ser_cmd_started=1;
ser_got_RGBbytes = bs =0;
virtser_send('/');
break;
case 'r': //red
rgblight_setrgb(RGB_RED);
break;
case 'g':
rgblight_setrgb(RGB_GREEN);
break;
case 'b': // color switch
rgblight_setrgb(RGB_BLUE);
break;
case 'w': // color switch
rgblight_setrgb(RGB_WHITE);
break;
case 'o': // color black/off
rgblight_setrgb(0,0,0);
break;
case 'T': // toggle
rgblight_toggle();
break;
case 'P': // pulse led
rgblight_mode_noeeprom(RGBLIGHT_MODE_BREATHING);
break;
case 'S': // Static
rgblight_mode(RGBLIGHT_MODE_STATIC_LIGHT);
break;
case 'U': // Rainbow
rgblight_mode_noeeprom(RGBLIGHT_MODE_RAINBOW_MOOD);
break;
default:
// virtser_send(serIn);
break;
}
}
#endif // RGBLIGHT_ENABLE
}
#endif // VirtSerial
View git blame Copy permalink