Use a better reset button footprint (#6)

output/gerbers/board/gerber/board-CmtUser.gbr

@@ -1,11 +1,11 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.5+dfsg1-2build2*
-G04 #@! TF.CreationDate,2021-11-11T22:32:06+00:00*
+G04 #@! TF.CreationDate,2021-11-13T16:54:47+00:00*
 G04 #@! TF.ProjectId,board,626f6172-642e-46b6-9963-61645f706362,VERSION_HERE*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Other,Comment*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-11 22:32:06*
+G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-13 16:54:47*
 %MOMM*%
 %LPD*%
 G04 APERTURE LIST*

output/gerbers/board/gerber/board-CuBottom.gbr

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.5+dfsg1-2build2*
-G04 #@! TF.CreationDate,2021-11-11T22:32:06+00:00*
+G04 #@! TF.CreationDate,2021-11-13T16:54:46+00:00*
 G04 #@! TF.ProjectId,board,626f6172-642e-46b6-9963-61645f706362,VERSION_HERE*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Copper,L2,Bot*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-11 22:32:06*
+G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-13 16:54:46*
 %MOMM*%
 %LPD*%
 G04 APERTURE LIST*
@@ -55,8 +55,8 @@ G04 #@! TD*
 G04 #@! TA.AperFunction,SMDPad,CuDef*
 %ADD24R,0.900000X0.900000*%
 G04 #@! TD*
-G04 #@! TA.AperFunction,SMDPad,CuDef*
+G04 #@! TA.AperFunction,ComponentPad*
-%ADD25R,1.100000X1.800000*%
+%ADD25C,2.000000*%
 G04 #@! TD*
 G04 #@! TA.AperFunction,ViaPad*
 %ADD26C,0.800000*%
@@ -1236,43 +1236,50 @@ X118900000Y13900000D03*
 X121100000Y13900000D03*
 G04 #@! TD*
 D25*
-G04 #@! TO.P,B2,1*
+G04 #@! TO.P,B1,2*
 G04 #@! TO.N,GND*
-X108850000Y13300000D03*
+X107000000Y13450000D03*
-X108850000Y7100000D03*
+G04 #@! TO.P,B1,1*
-G04 #@! TO.P,B2,2*
 G04 #@! TO.N,RST*
-X105150000Y13300000D03*
+X107000000Y6950000D03*
-X105150000Y7100000D03*
 G04 #@! TD*
 D26*
 G04 #@! TO.N,P20*
-X24087700Y30297700D03*
+X33988600Y37403000D03*
+X99028800Y28127800D03*
+X24269800Y28792900D03*
+G04 #@! TO.N,P5*
+X27000000Y10711700D03*
+X68488400Y25524500D03*
 G04 #@! TO.N,P19*
-X48323100Y40075400D03*
+X44029400Y40343800D03*
-X44275000Y26051400D03*
+X44969100Y13729400D03*
+X100107700Y26351300D03*
 G04 #@! TO.N,P18*
-X62275000Y45267300D03*
+X45978000Y30867100D03*
+X47898500Y20964800D03*
 X92019800Y-1797300D03*
 G04 #@! TO.N,P15*
-X81012000Y20907600D03*
+X80275000Y38463700D03*
-X78597500Y40989300D03*
+X83470000Y20907600D03*
 X110472400Y-9514600D03*
 G04 #@! TO.N,P14*
-X95967800Y51284600D03*
+X99495200Y23004800D03*
-X92196000Y30183600D03*
+X98275000Y41372200D03*
 X121164200Y-20809300D03*
 G04 #@! TO.N,inner_home*
 X88573200Y34998200D03*
 G04 #@! TO.N,RST*
-X105150000Y10211400D03*
+X111891700Y11822400D03*
+G04 #@! TO.N,P0*
+X121339000Y15229000D03*
 G04 #@! TO.N,Bplus*
 X119116600Y10200000D03*
 G04 #@! TO.N,Bminus*
-X113000000Y30595500D03*
+X111600200Y28844700D03*
 G04 #@! TO.N,Braw*
-X112314200Y11029600D03*
+X115682000Y10700400D03*
-X113018800Y24647100D03*
+X112628000Y24647100D03*
 G04 #@! TD*
 D27*
 G04 #@! TO.N,pinky_bottom*
@@ -1288,51 +1295,39 @@ X21810000Y-5000000D02*
 X19650000Y-5000000D01*
 G04 #@! TO.N,P20*
 X26275000Y37750000D02*
-X26275000Y39375300D01*
+X27900300Y37750000D01*
 X104880000Y33220000D02*
-X104880000Y33717600D01*
+X104880000Y32655500D01*
-X104880000Y33717600D02*
+X104880000Y32655500D02*
-X102857600Y35740000D01*
+X102884500Y30660000D01*
-X102857600Y35740000D02*
+X102884500Y30660000D02*
-X101913000Y35740000D01*
+X101561000Y30660000D01*
-X101913000Y35740000D02*
+X101561000Y30660000D02*
-X100601800Y37051200D01*
+X99028800Y28127800D01*
-X100601800Y37051200D02*
+X33988600Y37403000D02*
-X100601800Y48735900D01*
+X28247300Y37403000D01*
-X100601800Y48735900D02*
+X28247300Y37403000D02*
-X97300600Y52037100D01*
+X27900300Y37750000D01*
-X97300600Y52037100D02*
+X26275000Y3750000D02*
-X74590000Y52037100D01*
+X26275000Y5375300D01*
-X74590000Y52037100D02*
+X26275000Y20750000D02*
-X71751700Y54875400D01*
+X26275000Y19124700D01*
-X71751700Y54875400D02*
+X26275000Y19124700D02*
-X57151700Y54875400D01*
+X26274700Y19124400D01*
-X57151700Y54875400D02*
+X26274700Y19124400D02*
-X54948400Y57078700D01*
+X26274700Y5375600D01*
-X54948400Y57078700D02*
+X26274700Y5375600D02*
-X46228700Y57078700D01*
+X26275000Y5375300D01*
-X46228700Y57078700D02*
+X24269800Y28792900D02*
-X43679300Y54529300D01*
+X24269800Y24380500D01*
-X43679300Y54529300D02*
+X24269800Y24380500D02*
-X32340700Y54529300D01*
+X26275000Y22375300D01*
-X32340700Y54529300D02*
-X27698000Y49886600D01*
-X27698000Y49886600D02*
-X27698000Y40798300D01*
-X27698000Y40798300D02*
-X26275000Y39375300D01*
 X26275000Y37750000D02*
 X26275000Y32302900D01*
 X26275000Y32302900D02*
 X24269800Y30297700D01*
 X24269800Y30297700D02*
-X24269800Y24380500D01*
+X24269800Y28792900D01*
-X24269800Y24380500D02*
-X26275000Y22375300D01*
-X24087700Y30297700D02*
-X24269800Y30297700D01*
-X26275000Y20750000D02*
-X26275000Y3750000D01*
 X26275000Y21256000D02*
 X26275000Y20750000D01*
 X26275000Y21256000D02*
@@ -1350,18 +1345,18 @@ X16350000Y-5000000D02*
 X17125300Y-5000000D01*
 X34350000Y6900000D02*
 X32190000Y6900000D01*
+X102380000Y26850000D02*
+X100220600Y24690600D01*
+X100220600Y24690600D02*
+X100220600Y9803300D01*
+X100220600Y9803300D02*
+X94325500Y3908200D01*
+X94325500Y3908200D02*
+X90417100Y3908200D01*
+X90417100Y3908200D02*
+X89125300Y5200000D01*
 X88350000Y5200000D02*
 X89125300Y5200000D01*
-X89125300Y5200000D02*
-X90446600Y3878700D01*
-X90446600Y3878700D02*
-X94330400Y3878700D01*
-X94330400Y3878700D02*
-X100073300Y9621600D01*
-X100073300Y9621600D02*
-X100073300Y24543300D01*
-X100073300Y24543300D02*
-X102380000Y26850000D01*
 X88350000Y5200000D02*
 X86190000Y5200000D01*
 X16350000Y-5000000D02*
@@ -1382,18 +1377,22 @@ X14725000Y22950000D01*
 X21810000Y12000000D02*
 X19650000Y12000000D01*
 G04 #@! TO.N,P5*
-X52350000Y27300000D02*
+X68488400Y23900000D02*
-X53125300Y27300000D01*
+X68488400Y25524500D01*
-X68190000Y23900000D02*
+X32190000Y22685700D02*
-X56525300Y23900000D01*
+X27000000Y17495700D01*
-X56525300Y23900000D02*
+X27000000Y17495700D02*
-X53125300Y27300000D01*
+X27000000Y10711700D01*
-X70350000Y23900000D02*
+X32190000Y23900000D02*
-X68190000Y23900000D01*
+X32190000Y22685700D01*
-X16350000Y12000000D02*
-X14190000Y12000000D01*
 X34350000Y23900000D02*
 X32190000Y23900000D01*
+X68488400Y23900000D02*
+X68190000Y23900000D01*
+X70350000Y23900000D02*
+X68488400Y23900000D01*
+X16350000Y12000000D02*
+X14190000Y12000000D01*
 X52350000Y27300000D02*
 X50190000Y27300000D01*
 X88350000Y22200000D02*
@@ -1410,16 +1409,26 @@ X14725000Y39950000D01*
 X21810000Y29000000D02*
 X19650000Y29000000D01*
 G04 #@! TO.N,P4*
+X35125300Y40900000D02*
+X36413800Y39611500D01*
+X36413800Y39611500D02*
+X44411300Y39611500D01*
+X44411300Y39611500D02*
+X48975700Y44175900D01*
+X48975700Y44175900D02*
+X48975700Y44300000D01*
+X70350000Y40900000D02*
+X71125300Y40900000D01*
+X86190000Y39200000D02*
+X72825300Y39200000D01*
+X72825300Y39200000D02*
+X71125300Y40900000D01*
+X88350000Y39200000D02*
+X86190000Y39200000D01*
 X34350000Y40900000D02*
 X35125300Y40900000D01*
 X50190000Y44300000D02*
-X46105900Y44300000D01*
+X48975700Y44300000D01*
-X46105900Y44300000D02*
-X41417400Y39611500D01*
-X41417400Y39611500D02*
-X36413800Y39611500D01*
-X36413800Y39611500D02*
-X35125300Y40900000D01*
 X52350000Y44300000D02*
 X50190000Y44300000D01*
 X16350000Y29000000D02*
@@ -1428,8 +1437,6 @@ X34350000Y40900000D02*
 X32190000Y40900000D01*
 X70350000Y40900000D02*
 X68190000Y40900000D01*
-X88350000Y39200000D02*
-X86190000Y39200000D01*
 G04 #@! TO.N,ring_bottom*
 X37650000Y6900000D02*
 X36874700Y6900000D01*
@@ -1442,28 +1449,26 @@ X32725000Y17850000D01*
 X39810000Y6900000D02*
 X37650000Y6900000D01*
 G04 #@! TO.N,P19*
-X48323100Y40075400D02*
-X49638600Y40075400D01*
-X49638600Y40075400D02*
-X53125400Y43562200D01*
-X53125400Y43562200D02*
-X53125400Y45054800D01*
-X53125400Y45054800D02*
-X50155500Y48024700D01*
-X50155500Y48024700D02*
-X47525600Y48024700D01*
-X47525600Y48024700D02*
-X45900300Y49650000D01*
-X44275000Y32650000D02*
-X44275000Y36027300D01*
-X44275000Y36027300D02*
-X48323100Y40075400D01*
 X44275000Y49650000D02*
-X45900300Y49650000D01*
+X44275000Y40589400D01*
-X44275000Y26051400D02*
+X44275000Y40589400D02*
-X44275000Y15650000D01*
+X44029400Y40343800D01*
+X44275000Y15650000D02*
+X44275000Y14024700D01*
+X44969100Y13729400D02*
+X44673800Y14024700D01*
+X44673800Y14024700D02*
+X44275000Y14024700D01*
+X104880000Y30680000D02*
+X104880000Y30115500D01*
+X104880000Y30115500D02*
+X102952800Y28188300D01*
+X102952800Y28188300D02*
+X101944700Y28188300D01*
+X101944700Y28188300D02*
+X100107700Y26351300D01*
 X44275000Y32650000D02*
-X44275000Y26051400D01*
+X44275000Y15650000D01*
 G04 #@! TO.N,ring_home*
 X37650000Y23900000D02*
 X36874700Y23900000D01*
@@ -1498,7 +1503,35 @@ X50725000Y21250000D01*
 X57810000Y10300000D02*
 X55650000Y10300000D01*
 G04 #@! TO.N,P18*
-X71150900Y19724800D02*
+X49477600Y23087400D02*
+X45978000Y26587000D01*
+X45978000Y26587000D02*
+X45978000Y30867100D01*
+X49477600Y23087400D02*
+X47898500Y21508300D01*
+X47898500Y21508300D02*
+X47898500Y20964800D01*
+X62275000Y23087400D02*
+X49477600Y23087400D01*
+X62275000Y23087400D02*
+X62275000Y19724800D01*
+X62275000Y36050000D02*
+X62275000Y23087400D01*
+X104880000Y28140000D02*
+X104880000Y27587100D01*
+X104880000Y27587100D02*
+X102872900Y25580000D01*
+X102872900Y25580000D02*
+X101914700Y25580000D01*
+X101914700Y25580000D02*
+X100670900Y24336200D01*
+X100670900Y24336200D02*
+X100670900Y6853800D01*
+X100670900Y6853800D02*
+X92019800Y-1797300D01*
+X62275000Y19724800D02*
+X62275000Y19050000D01*
+X62275000Y19724800D02*
 X72762200Y19724800D01*
 X72762200Y19724800D02*
 X74043900Y18443100D01*
@@ -1508,42 +1541,14 @@ X74043900Y13661000D02*
 X89502200Y-1797300D01*
 X89502200Y-1797300D02*
 X92019800Y-1797300D01*
-X63900300Y19050000D02*
-X64575100Y19724800D01*
-X64575100Y19724800D02*
-X71150900Y19724800D01*
-X71150900Y19724800D02*
-X71150900Y25917500D01*
-X71150900Y25917500D02*
-X62643700Y34424700D01*
-X62643700Y34424700D02*
-X62275000Y34424700D01*
-X62275000Y19050000D02*
-X63900300Y19050000D01*
-X62275000Y36050000D02*
-X62275000Y34424700D01*
 X92390300Y-5947800D02*
 X92390200Y-5947800D01*
 X92390200Y-5947800D02*
 X92019800Y-5577400D01*
 X92019800Y-5577400D02*
 X92019800Y-1797300D01*
-X62275000Y45267300D02*
-X62275000Y36050000D01*
 X62275000Y53050000D02*
-X62275000Y45267300D01*
+X62275000Y36050000D01*
-X92019800Y-1797300D02*
-X100691700Y6874600D01*
-X100691700Y6874600D02*
-X100691700Y24323500D01*
-X100691700Y24323500D02*
-X101948200Y25580000D01*
-X101948200Y25580000D02*
-X102872900Y25580000D01*
-X102872900Y25580000D02*
-X104880000Y27587100D01*
-X104880000Y27587100D02*
-X104880000Y28140000D01*
 X91856900Y-7938500D02*
 X92390300Y-5947800D01*
 G04 #@! TO.N,middle_home*
@@ -1580,31 +1585,39 @@ X68725000Y17850000D01*
 X75810000Y6900000D02*
 X73650000Y6900000D01*
 G04 #@! TO.N,P15*
+X80275000Y32650000D02*
+X80275000Y38463700D01*
+X80275000Y49650000D02*
+X81900300Y49650000D01*
+X80275000Y32650000D02*
+X81900300Y32650000D01*
+X81900300Y32650000D02*
+X86189600Y36939300D01*
+X86189600Y36939300D02*
+X87645100Y36939300D01*
+X87645100Y36939300D02*
+X89125400Y38419600D01*
+X89125400Y38419600D02*
+X89125400Y39954700D01*
+X89125400Y39954700D02*
+X86733100Y42347000D01*
+X86733100Y42347000D02*
+X86733100Y43635400D01*
+X86733100Y43635400D02*
+X81900300Y48468200D01*
+X81900300Y48468200D02*
+X81900300Y49650000D01*
+X80275000Y20907600D02*
+X80275000Y32650000D01*
 X80275000Y20907600D02*
 X80275000Y15650000D01*
-X80275000Y32650000D02*
-X80275000Y20907600D01*
 X80275000Y20907600D02*
-X81012000Y20907600D01*
+X83470000Y20907600D01*
-X80275000Y33462700D02*
-X80275000Y32650000D01*
-X80275000Y33462700D02*
-X80275000Y34275300D01*
-X78597500Y40989300D02*
-X78597500Y35952800D01*
-X78597500Y35952800D02*
-X80275000Y34275300D01*
-X80275000Y49650000D02*
-X80275000Y47011400D01*
-X80275000Y47011400D02*
-X78597500Y45333900D01*
-X78597500Y45333900D02*
-X78597500Y40989300D01*
 X110472400Y-9514600D02*
-X103662800Y-2705000D01*
+X103634800Y-2677000D01*
-X103662800Y-2705000D02*
+X103634800Y-2677000D02*
-X103662800Y24382800D01*
+X103634800Y24354800D01*
-X103662800Y24382800D02*
+X103634800Y24354800D02*
 X104880000Y25600000D01*
 X111502800Y-16202700D02*
 X110472400Y-15172300D01*
@@ -1613,22 +1626,14 @@ X110472400Y-9514600D01*
 X110472400Y-17987400D02*
 X111502800Y-16202700D01*
 G04 #@! TO.N,index_home*
-X72874700Y23900000D02*
-X72874700Y26889900D01*
-X72874700Y26889900D02*
-X74039800Y28055000D01*
-X74039800Y28055000D02*
-X74039800Y29745000D01*
-X74039800Y29745000D02*
-X70131700Y33653100D01*
-X70131700Y33653100D02*
-X69921800Y33653100D01*
-X69921800Y33653100D02*
-X69921800Y33653200D01*
-X69921800Y33653200D02*
-X68725000Y34850000D01*
 X73650000Y23900000D02*
 X72874700Y23900000D01*
+X72874700Y23900000D02*
+X69921700Y26853000D01*
+X69921700Y26853000D02*
+X69921700Y33653300D01*
+X69921700Y33653300D02*
+X68725000Y34850000D01*
 X75810000Y23900000D02*
 X73650000Y23900000D01*
 G04 #@! TO.N,index_top*
@@ -1654,66 +1659,42 @@ X86725000Y16150000D01*
 X93810000Y5200000D02*
 X91650000Y5200000D01*
 G04 #@! TO.N,P14*
+X117620000Y24310000D02*
+X118902800Y23027200D01*
+X118902800Y23027200D02*
+X118902800Y16028400D01*
+X118902800Y16028400D02*
+X120324700Y14606500D01*
+X120324700Y14606500D02*
+X120324700Y13315200D01*
+X120324700Y13315200D02*
+X120860700Y12779200D01*
+X120860700Y12779200D02*
+X120860700Y7643100D01*
+X120860700Y7643100D02*
+X120302500Y7084900D01*
+X120302500Y7084900D02*
+X120302500Y2941400D01*
+X120302500Y2941400D02*
+X121347800Y1896100D01*
+X121347800Y1896100D02*
+X121347800Y-20625700D01*
+X121347800Y-20625700D02*
+X121164200Y-20809300D01*
+X98275000Y23004800D02*
+X98275000Y13950000D01*
+X98275000Y30950000D02*
+X98275000Y23004800D01*
+X98275000Y23004800D02*
+X99495200Y23004800D01*
+X98275000Y41372200D02*
+X98275000Y30950000D01*
 X98275000Y47950000D02*
-X98275000Y49575300D01*
+X98275000Y41372200D01*
-X98275000Y49575300D02*
-X97677100Y49575300D01*
-X97677100Y49575300D02*
-X95967800Y51284600D01*
-X121164200Y-20809300D02*
-X117362400Y-17007500D01*
-X117362400Y-17007500D02*
-X117362400Y2608800D01*
-X117362400Y2608800D02*
-X119675400Y4921800D01*
-X119675400Y4921800D02*
-X119675400Y7115800D01*
-X119675400Y7115800D02*
-X120860700Y8301100D01*
-X120860700Y8301100D02*
-X120860700Y9576800D01*
-X120860700Y9576800D02*
-X119156700Y11280800D01*
-X119156700Y11280800D02*
-X119156700Y12796600D01*
-X119156700Y12796600D02*
-X119675400Y13315300D01*
-X119675400Y13315300D02*
-X119675400Y14512800D01*
-X119675400Y14512800D02*
-X116365300Y17822900D01*
-X116365300Y17822900D02*
-X116365300Y23055300D01*
-X116365300Y23055300D02*
-X117620000Y24310000D01*
 X125852000Y-32512000D02*
 X125852000Y-25497100D01*
 X125852000Y-25497100D02*
 X121164200Y-20809300D01*
-X98275000Y29102400D02*
-X98275000Y13950000D01*
-X98275000Y30658200D02*
-X98275000Y29102400D01*
-X98275000Y29102400D02*
-X93277200Y29102400D01*
-X93277200Y29102400D02*
-X92196000Y30183600D01*
-X98275000Y30658200D02*
-X102842700Y30658200D01*
-X102842700Y30658200D02*
-X104090900Y29410000D01*
-X104090900Y29410000D02*
-X105335200Y29410000D01*
-X105335200Y29410000D02*
-X106090200Y28655000D01*
-X106090200Y28655000D02*
-X106090200Y24270200D01*
-X106090200Y24270200D02*
-X104880000Y23060000D01*
-X98275000Y30950000D02*
-X98275000Y30658200D01*
-X98275000Y47950000D02*
-X98275000Y30950000D01*
 G04 #@! TO.N,inner_home*
 X86725000Y33150000D02*
 X88573200Y34998200D01*
@@ -1765,10 +1746,10 @@ X96199700Y-20091100D01*
 X96199700Y-20091100D02*
 X95631300Y-19522700D01*
 X102380000Y24310000D02*
-X101178400Y23108400D01*
+X101177600Y23107600D01*
-X101178400Y23108400D02*
+X101177600Y23107600D02*
-X101178400Y-6190700D01*
+X101177600Y-6191500D01*
-X101178400Y-6190700D02*
+X101177600Y-6191500D02*
 X97102700Y-10266400D01*
 X97102700Y-10266400D02*
 X97102700Y-12433700D01*
@@ -1814,63 +1795,49 @@ X116508100Y-35541900D02*
 X114980700Y-34014500D01*
 D28*
 G04 #@! TO.N,GND*
+X115800000Y1800000D02*
+X115800000Y3050300D01*
+X104880000Y43380000D02*
+X107000000Y41260000D01*
+X107000000Y41260000D02*
+X107000000Y13450000D01*
+X115800000Y3050300D02*
+X107000000Y11850300D01*
+X107000000Y11850300D02*
+X107000000Y13450000D01*
 X102380000Y39550000D02*
 X102380000Y42090000D01*
 X120120000Y38300000D02*
 X120120000Y40840000D01*
-X108850000Y13300000D02*
-X108850000Y39410000D01*
-X108850000Y39410000D02*
-X104880000Y43380000D01*
-X108850000Y7100000D02*
-X108850000Y13300000D01*
-X115024900Y1800000D02*
-X115800000Y1024900D01*
-X115800000Y1024900D02*
-X115800000Y-4800000D01*
-X115024900Y1800000D02*
-X114249700Y1800000D01*
 X115800000Y1800000D02*
-X115024900Y1800000D01*
+X115800000Y-4800000D01*
-X108850000Y7100000D02*
-X108850000Y5749700D01*
-X108850000Y5749700D02*
-X110300000Y5749700D01*
-X110300000Y5749700D02*
-X114249700Y1800000D01*
 D27*
 G04 #@! TO.N,RST*
-X105150000Y13300000D02*
+X111891700Y11822400D02*
-X105150000Y14525300D01*
+X111891700Y27068300D01*
-X104880000Y40840000D02*
+X111891700Y27068300D02*
-X103650000Y39610000D01*
+X112842000Y28018600D01*
-X103650000Y39610000D02*
+X112842000Y28018600D02*
-X103650000Y37784200D01*
+X113812100Y28018600D01*
-X103650000Y37784200D02*
+X113812100Y28018600D02*
-X104335900Y37098300D01*
+X116281700Y30488200D01*
-X104335900Y37098300D02*
+X116281700Y30488200D02*
-X105268000Y37098300D01*
+X116281700Y40751700D01*
-X105268000Y37098300D02*
+X116281700Y40751700D02*
-X106540600Y35825700D01*
+X117620000Y42090000D01*
-X106540600Y35825700D02*
-X106540600Y15915900D01*
-X106540600Y15915900D02*
-X105150000Y14525300D01*
-X105150000Y10211400D02*
-X105150000Y13300000D01*
-X105150000Y7100000D02*
-X105150000Y10211400D01*
 D28*
 G04 #@! TO.N,VCC*
 X111800000Y1800000D02*
-X111800000Y3050300D01*
+X111800000Y4283800D01*
-X111800000Y3050300D02*
+X111800000Y4283800D02*
-X110549700Y3050300D01*
+X105492000Y10591800D01*
-X110549700Y3050300D02*
+X105492000Y10591800D02*
-X107425900Y6174100D01*
+X105492000Y14062400D01*
-X107425900Y6174100D02*
+X105492000Y14062400D02*
-X107425900Y35754100D01*
+X106252600Y14823000D01*
-X107425900Y35754100D02*
+X106252600Y14823000D02*
+X106252600Y36927400D01*
+X106252600Y36927400D02*
 X104880000Y38300000D01*
 X111800000Y-4800000D02*
 X112300000Y-4300000D01*
@@ -1880,42 +1847,26 @@ X112300000Y1300000D02*
 X111800000Y1800000D01*
 D27*
 G04 #@! TO.N,P0*
-X118800000Y2925300D02*
+X120120000Y43380000D02*
-X120302500Y4427800D01*
+X121339000Y42161000D01*
-X120302500Y4427800D02*
+X121339000Y42161000D02*
-X120302500Y7084800D01*
+X121339000Y15229000D01*
-X120302500Y7084800D02*
-X121311000Y8093300D01*
-X121311000Y8093300D02*
-X121311000Y11800900D01*
-X121311000Y11800900D02*
-X120324600Y12787300D01*
-X120324600Y12787300D02*
-X120324600Y14606600D01*
-X120324600Y14606600D02*
-X118902800Y16028400D01*
-X118902800Y16028400D02*
-X118902800Y42162800D01*
-X118902800Y42162800D02*
-X120120000Y43380000D01*
-X118800000Y1800000D02*
-X118800000Y2925300D01*
 X118800000Y1800000D02*
 X118800000Y-4800000D01*
 D28*
 G04 #@! TO.N,Bplus*
-X110202500Y43137500D02*
+X107844300Y45495700D02*
-X110202500Y11938800D01*
+X107844300Y14667300D01*
-X110202500Y11938800D02*
+X107844300Y14667300D02*
-X112441700Y9699600D01*
+X112478200Y10033400D01*
-X112441700Y9699600D02*
+X112478200Y10033400D02*
 X112478200Y9699600D01*
-X110202500Y43137500D02*
+X107844300Y45495700D02*
-X116775000Y49710000D01*
-X116775000Y49710000D02*
-X117620000Y49710000D01*
-X110202500Y43137500D02*
 X104880000Y48460000D01*
+X107844300Y45495700D02*
+X112058600Y49710000D01*
+X112058600Y49710000D02*
+X117620000Y49710000D01*
 X113500000Y9699600D02*
 X112478200Y9699600D01*
 X114010900Y9699600D02*
@@ -1933,38 +1884,42 @@ X114771400Y9450000D01*
 X114771400Y9450000D02*
 X114521800Y9699600D01*
 G04 #@! TO.N,Bminus*
-X113000000Y30595500D02*
+X113000000Y29200000D02*
-X113000000Y44944500D01*
+X111799700Y29200000D01*
-X113000000Y44944500D02*
+X111600200Y28844700D02*
-X116558000Y48502500D01*
+X111799700Y29044200D01*
-X116558000Y48502500D02*
+X111799700Y29044200D02*
+X111799700Y29200000D01*
+X113000000Y29200000D02*
+X113000000Y44986700D01*
+X113000000Y44986700D02*
+X116515800Y48502500D01*
+X116515800Y48502500D02*
 X120077500Y48502500D01*
 X120077500Y48502500D02*
 X120120000Y48460000D01*
-X113000000Y29200000D02*
-X113000000Y30595500D01*
 G04 #@! TO.N,Braw*
-X113500000Y11084300D02*
+X115682000Y12450000D02*
-X112368900Y11084300D01*
+X114481800Y12450000D01*
-X112368900Y11084300D02*
+X117925000Y12450000D02*
-X112314200Y11029600D01*
+X115682000Y12450000D01*
-X113500000Y11084300D02*
+X115682000Y12450000D02*
-X113500000Y11468200D01*
+X115682000Y10700400D01*
-X113500000Y10700400D02*
-X113500000Y11084300D01*
-X114481800Y12450000D02*
-X114481800Y23184100D01*
-X114481800Y23184100D02*
-X113018800Y24647100D01*
 X113000000Y25599900D02*
-X113018800Y25581100D01*
+X112628000Y25227900D01*
-X113018800Y25581100D02*
+X112628000Y25227900D02*
-X113018800Y24647100D01*
+X112628000Y24647100D01*
+X113000000Y25599900D02*
+X113000000Y24999700D01*
 X113000000Y26200000D02*
 X113000000Y25599900D01*
 X114481800Y12450000D02*
 X113500000Y11468200D01*
-X117925000Y12450000D02*
+X114481800Y12450000D02*
-X114481800Y12450000D01*
+X114481800Y23517900D01*
+X114481800Y23517900D02*
+X113000000Y24999700D01*
+X113500000Y10700400D02*
+X113500000Y11468200D01*
 G04 #@! TD*
 M02*

output/gerbers/board/gerber/board-EdgeCuts.gbr

@@ -1,11 +1,11 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.5+dfsg1-2build2*
-G04 #@! TF.CreationDate,2021-11-11T22:32:06+00:00*
+G04 #@! TF.CreationDate,2021-11-13T16:54:47+00:00*
 G04 #@! TF.ProjectId,board,626f6172-642e-46b6-9963-61645f706362,VERSION_HERE*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Profile,NP*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-11 22:32:06*
+G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-13 16:54:47*
 %MOMM*%
 %LPD*%
 G04 APERTURE LIST*

output/gerbers/board/gerber/board-PasteBottom.gbr

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.5+dfsg1-2build2*
-G04 #@! TF.CreationDate,2021-11-11T22:32:06+00:00*
+G04 #@! TF.CreationDate,2021-11-13T16:54:47+00:00*
 G04 #@! TF.ProjectId,board,626f6172-642e-46b6-9963-61645f706362,VERSION_HERE*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Paste,Bot*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-11 22:32:06*
+G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-13 16:54:47*
 %MOMM*%
 %LPD*%
 G04 APERTURE LIST*
@@ -20,7 +20,6 @@ G04 #@! TD*
 %ADD15R,1.143000X0.635000*%
 %ADD16R,1.250000X0.900000*%
 %ADD17R,0.900000X0.900000*%
-%ADD18R,1.100000X1.800000*%
 G04 APERTURE END LIST*
 D10*
 X10000000Y-9500000D02*
@@ -401,11 +400,4 @@ X118900000Y6500000D03*
 X118900000Y13900000D03*
 X121100000Y13900000D03*
 G04 #@! TD*
-D18*
-G04 #@! TO.C,B2*
-X108850000Y13300000D03*
-X108850000Y7100000D03*
-X105150000Y13300000D03*
-X105150000Y7100000D03*
-G04 #@! TD*
 M02*

output/gerbers/board/gerber/board-PasteTop.gbr

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.5+dfsg1-2build2*
-G04 #@! TF.CreationDate,2021-11-11T22:32:06+00:00*
+G04 #@! TF.CreationDate,2021-11-13T16:54:47+00:00*
 G04 #@! TF.ProjectId,board,626f6172-642e-46b6-9963-61645f706362,VERSION_HERE*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Paste,Top*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-11 22:32:06*
+G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-13 16:54:47*
 %MOMM*%
 %LPD*%
 G04 APERTURE LIST*
@@ -20,7 +20,6 @@ G04 #@! TD*
 %ADD15R,1.143000X0.635000*%
 %ADD16R,1.250000X0.900000*%
 %ADD17R,0.900000X0.900000*%
-%ADD18R,1.100000X1.800000*%
 G04 APERTURE END LIST*
 D10*
 X10000000Y-9500000D02*
@@ -401,11 +400,4 @@ X118900000Y6500000D03*
 X118900000Y13900000D03*
 X121100000Y13900000D03*
 G04 #@! TD*
-D18*
-G04 #@! TO.C,B1*
-X108850000Y13300000D03*
-X108850000Y7100000D03*
-X105150000Y13300000D03*
-X105150000Y7100000D03*
-G04 #@! TD*
 M02*

output/gerbers/board/gerber/board-SilkBottom.gbr

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.5+dfsg1-2build2*
-G04 #@! TF.CreationDate,2021-11-11T22:32:06+00:00*
+G04 #@! TF.CreationDate,2021-11-13T16:54:47+00:00*
 G04 #@! TF.ProjectId,board,626f6172-642e-46b6-9963-61645f706362,VERSION_HERE*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Legend,Bot*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-11 22:32:06*
+G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-13 16:54:47*
 %MOMM*%
 %LPD*%
 G04 APERTURE LIST*
@@ -732,23 +732,19 @@ X118500000Y6900000D02*
 X121350000Y6900000D01*
 X121350000Y10200000D02*
 X121350000Y6900000D01*
-G04 #@! TO.C,B2*
+G04 #@! TO.C,B1*
-X105750000Y7450000D02*
+X105500000Y7200000D02*
-X104250000Y8950000D01*
+X105250000Y7200000D01*
-X108250000Y7450000D02*
+X105250000Y7200000D02*
-X109750000Y8950000D01*
+X105250000Y13200000D01*
-X108250000Y7450000D02*
+X105250000Y13200000D02*
-X105750000Y7450000D01*
+X105500000Y13200000D01*
-X104250000Y11450000D02*
+X108500000Y13200000D02*
-X104250000Y8950000D01*
+X108750000Y13200000D01*
-X109750000Y11450000D02*
+X108750000Y13200000D02*
-X109750000Y8950000D01*
+X108750000Y7200000D01*
-X105750000Y12950000D02*
+X108750000Y7200000D02*
-X104250000Y11450000D01*
+X108500000Y7200000D01*
-X108250000Y12950000D02*
-X109750000Y11450000D01*
-X108250000Y12950000D02*
-X105750000Y12950000D01*
 G04 #@! TD*
 G04 #@! TO.C,MCU1*
 X115352380Y46808095D02*
@@ -1809,5 +1805,55 @@ X111188095Y29257142D01*
 X111454761Y29257142D01*
 X110654761Y29142857D02*
 X110045238Y29142857D01*
+G04 #@! TO.C,B1*
+X107452380Y11525380D02*
+X106976190Y11858714D01*
+X107452380Y12096809D02*
+X106452380Y12096809D01*
+X106452380Y11715857D01*
+X106500000Y11620619D01*
+X106547619Y11573000D01*
+X106642857Y11525380D01*
+X106785714Y11525380D01*
+X106880952Y11573000D01*
+X106928571Y11620619D01*
+X106976190Y11715857D01*
+X106976190Y12096809D01*
+X106928571Y11096809D02*
+X106928571Y10763476D01*
+X107452380Y10620619D02*
+X107452380Y11096809D01*
+X106452380Y11096809D01*
+X106452380Y10620619D01*
+X107404761Y10239666D02*
+X107452380Y10096809D01*
+X107452380Y9858714D01*
+X107404761Y9763476D01*
+X107357142Y9715857D01*
+X107261904Y9668238D01*
+X107166666Y9668238D01*
+X107071428Y9715857D01*
+X107023809Y9763476D01*
+X106976190Y9858714D01*
+X106928571Y10049190D01*
+X106880952Y10144428D01*
+X106833333Y10192047D01*
+X106738095Y10239666D01*
+X106642857Y10239666D01*
+X106547619Y10192047D01*
+X106500000Y10144428D01*
+X106452380Y10049190D01*
+X106452380Y9811095D01*
+X106500000Y9668238D01*
+X106928571Y9239666D02*
+X106928571Y8906333D01*
+X107452380Y8763476D02*
+X107452380Y9239666D01*
+X106452380Y9239666D01*
+X106452380Y8763476D01*
+X106452380Y8477761D02*
+X106452380Y7906333D01*
+X107452380Y8192047D02*
+X106452380Y8192047D01*
 G04 #@! TD*
 M02*

output/gerbers/board/gerber/board-SilkTop.gbr

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.5+dfsg1-2build2*
-G04 #@! TF.CreationDate,2021-11-11T22:32:06+00:00*
+G04 #@! TF.CreationDate,2021-11-13T16:54:47+00:00*
 G04 #@! TF.ProjectId,board,626f6172-642e-46b6-9963-61645f706362,VERSION_HERE*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Legend,Top*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-11 22:32:06*
+G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-13 16:54:47*
 %MOMM*%
 %LPD*%
 G04 APERTURE LIST*
@@ -733,22 +733,18 @@ X121350000Y6900000D01*
 X121350000Y10200000D02*
 X121350000Y6900000D01*
 G04 #@! TO.C,B1*
-X105750000Y7450000D02*
+X105250000Y13200000D02*
-X104250000Y8950000D01*
+X105250000Y7200000D01*
-X108250000Y7450000D02*
+X105250000Y7200000D02*
-X109750000Y8950000D01*
+X105500000Y7200000D01*
-X108250000Y7450000D02*
+X105250000Y13200000D02*
-X105750000Y7450000D01*
+X105500000Y13200000D01*
-X104250000Y11450000D02*
+X108750000Y13200000D02*
-X104250000Y8950000D01*
+X108500000Y13200000D01*
-X109750000Y11450000D02*
+X108750000Y13200000D02*
-X109750000Y8950000D01*
+X108750000Y7200000D01*
-X105750000Y12950000D02*
+X108750000Y7200000D02*
-X104250000Y11450000D01*
+X108500000Y7200000D01*
-X108250000Y12950000D02*
-X109750000Y11450000D01*
-X108250000Y12950000D02*
-X105750000Y12950000D01*
 G04 #@! TD*
 G04 #@! TO.C,MCU2*
 X107147619Y45558095D02*
@@ -1809,5 +1805,55 @@ X110311904Y29257142D01*
 X110045238Y29257142D01*
 X110845238Y29142857D02*
 X111454761Y29142857D01*
+G04 #@! TO.C,B1*
+X107452380Y8747619D02*
+X106976190Y8414285D01*
+X107452380Y8176190D02*
+X106452380Y8176190D01*
+X106452380Y8557142D01*
+X106500000Y8652380D01*
+X106547619Y8700000D01*
+X106642857Y8747619D01*
+X106785714Y8747619D01*
+X106880952Y8700000D01*
+X106928571Y8652380D01*
+X106976190Y8557142D01*
+X106976190Y8176190D01*
+X106928571Y9176190D02*
+X106928571Y9509523D01*
+X107452380Y9652380D02*
+X107452380Y9176190D01*
+X106452380Y9176190D01*
+X106452380Y9652380D01*
+X107404761Y10033333D02*
+X107452380Y10176190D01*
+X107452380Y10414285D01*
+X107404761Y10509523D01*
+X107357142Y10557142D01*
+X107261904Y10604761D01*
+X107166666Y10604761D01*
+X107071428Y10557142D01*
+X107023809Y10509523D01*
+X106976190Y10414285D01*
+X106928571Y10223809D01*
+X106880952Y10128571D01*
+X106833333Y10080952D01*
+X106738095Y10033333D01*
+X106642857Y10033333D01*
+X106547619Y10080952D01*
+X106500000Y10128571D01*
+X106452380Y10223809D01*
+X106452380Y10461904D01*
+X106500000Y10604761D01*
+X106928571Y11033333D02*
+X106928571Y11366666D01*
+X107452380Y11509523D02*
+X107452380Y11033333D01*
+X106452380Y11033333D01*
+X106452380Y11509523D01*
+X106452380Y11795238D02*
+X106452380Y12366666D01*
+X107452380Y12080952D02*
+X106452380Y12080952D01*
 G04 #@! TD*
 M02*

output/gerbers/board/gerber/board.drl

@@ -1,7 +1,7 @@
 M48
-; DRILL file {KiCad 5.1.5+dfsg1-2build2} date Thu Nov 11 22:32:06 2021
+; DRILL file {KiCad 5.1.5+dfsg1-2build2} date Sat Nov 13 16:54:47 2021
 ; FORMAT={-:-/ absolute / metric / decimal}
-; #@! TF.CreationDate,2021-11-11T22:32:06+00:00
+; #@! TF.CreationDate,2021-11-13T16:54:47+00:00
 ; #@! TF.GenerationSoftware,Kicad,Pcbnew,5.1.5+dfsg1-2build2
 FMAT,2
 METRIC
@@ -9,41 +9,41 @@ T1C0.400
 T2C0.900
 T3C0.991
 T4C1.092
-T5C0.900
+T5C1.300
-T6C1.200
+T6C0.900
-T7C1.702
+T7C1.200
-T8C3.000
+T8C1.702
-T9C3.429
+T9C3.000
+T10C3.429
 %
 G90
 G05
 T1
-X24.088Y30.298
+X24.27Y28.793
-X44.275Y26.051
+X27.0Y10.712
-X48.323Y40.075
+X33.989Y37.403
-X62.275Y45.267
+X44.029Y40.344
-X78.597Y40.989
+X44.969Y13.729
-X81.012Y20.908
+X45.978Y30.867
+X47.898Y20.965
+X68.488Y25.524
+X80.275Y38.464
+X83.47Y20.908
 X88.573Y34.998
 X92.02Y-1.797
-X92.196Y30.184
+X98.275Y41.372
-X95.968Y51.285
+X99.029Y28.128
-X105.15Y10.211
+X99.495Y23.005
+X100.108Y26.351
 X110.472Y-9.515
-X112.314Y11.03
+X111.6Y28.845
-X113.0Y30.595
+X111.892Y11.822
-X113.019Y24.647
+X112.628Y24.647
+X115.682Y10.7
 X119.117Y10.2
 X121.164Y-20.809
+X121.339Y15.229
 T3
-X86.19Y22.2
-X93.81Y22.2
-X86.19Y39.2
-X93.81Y39.2
-X50.19Y44.3
-X57.81Y44.3
-X32.19Y40.9
-X39.81Y40.9
 X95.631Y-19.523
 X102.23Y-23.333
 X14.19Y-5.0
@@ -72,6 +72,14 @@ X111.12Y-30.154
 X116.508Y-35.542
 X14.19Y12.0
 X21.81Y12.0
+X86.19Y22.2
+X93.81Y22.2
+X86.19Y39.2
+X93.81Y39.2
+X50.19Y44.3
+X57.81Y44.3
+X32.19Y40.9
+X39.81Y40.9
 T4
 X104.88Y48.46
 X104.88Y45.92
@@ -126,24 +134,21 @@ X117.62Y24.31
 X117.62Y21.77
 X117.62Y19.23
 T5
-X120.0Y11.7
+X107.0Y13.45
-X120.0Y8.7
+X107.0Y6.95
-X120.0Y11.7
-X120.0Y8.7
 T6
-X113.4Y-2.5
+X120.0Y11.7
-X120.4Y-2.5
+X120.0Y8.7
+X120.0Y11.7
+X120.0Y8.7
+T7
 X113.4Y-0.5
 X120.4Y-0.5
-T7
+X113.4Y-2.5
-X84.5Y10.2
+X120.4Y-2.5
-X95.5Y10.2
+T8
-X30.5Y28.9
-X41.5Y28.9
 X66.5Y45.9
 X77.5Y45.9
-X12.5Y0.0
-X23.5Y0.0
 X30.5Y11.9
 X41.5Y11.9
 X66.5Y28.9
@@ -162,6 +167,8 @@ X113.46Y-25.423
 X121.238Y-33.201
 X12.5Y17.0
 X23.5Y17.0
+X12.5Y0.0
+X23.5Y0.0
 X84.5Y27.2
 X95.5Y27.2
 X30.5Y45.9
@@ -172,27 +179,11 @@ X96.668Y-14.348
 X106.194Y-19.848
 X48.5Y49.3
 X59.5Y49.3
-T8
+X84.5Y10.2
-X49.0Y53.05
+X95.5Y10.2
-X54.0Y55.25
+X30.5Y28.9
-X54.0Y55.25
+X41.5Y28.9
-X59.0Y53.05
+T9
-X85.0Y13.95
-X90.0Y16.15
-X90.0Y16.15
-X95.0Y13.95
-X31.0Y32.65
-X36.0Y34.85
-X36.0Y34.85
-X41.0Y32.65
-X67.0Y49.65
-X72.0Y51.85
-X72.0Y51.85
-X77.0Y49.65
-X13.0Y3.75
-X18.0Y5.95
-X18.0Y5.95
-X23.0Y3.75
 X31.0Y15.65
 X36.0Y17.85
 X36.0Y17.85
@@ -229,6 +220,10 @@ X13.0Y20.75
 X18.0Y22.95
 X18.0Y22.95
 X23.0Y20.75
+X13.0Y3.75
+X18.0Y5.95
+X18.0Y5.95
+X23.0Y3.75
 X85.0Y30.95
 X90.0Y33.15
 X90.0Y33.15
@@ -245,7 +240,23 @@ X98.976Y-11.35
 X104.406Y-11.945
 X104.406Y-11.945
 X107.636Y-16.35
-T9
+X49.0Y53.05
+X54.0Y55.25
+X54.0Y55.25
+X59.0Y53.05
+X85.0Y13.95
+X90.0Y16.15
+X90.0Y16.15
+X95.0Y13.95
+X31.0Y32.65
+X36.0Y34.85
+X36.0Y34.85
+X41.0Y32.65
+X67.0Y49.65
+X72.0Y51.85
+X72.0Y51.85
+X77.0Y49.65
+T10
 X36.0Y11.9
 X72.0Y28.9
 X18.0Y34.0
@@ -255,6 +266,7 @@ X72.0Y11.9
 X54.0Y15.3
 X117.349Y-29.312
 X18.0Y17.0
+X18.0Y0.0
 X90.0Y27.2
 X36.0Y45.9
 X90.0Y44.2
@@ -263,16 +275,7 @@ X54.0Y49.3
 X90.0Y10.2
 X36.0Y28.9
 X72.0Y45.9
-X18.0Y0.0
 T2
-X111.0Y-0.2G85X110.4Y-0.2
-G05
-X112.1Y-4.8G85X111.5Y-4.8
-G05
-X116.1Y-4.8G85X115.5Y-4.8
-G05
-X119.1Y-4.8G85X118.5Y-4.8
-G05
 X111.0Y-2.8G85X110.4Y-2.8
 G05
 X112.1Y1.8G85X111.5Y1.8
@@ -281,5 +284,13 @@ X116.1Y1.8G85X115.5Y1.8
 G05
 X119.1Y1.8G85X118.5Y1.8
 G05
+X111.0Y-0.2G85X110.4Y-0.2
+G05
+X112.1Y-4.8G85X111.5Y-4.8
+G05
+X116.1Y-4.8G85X115.5Y-4.8
+G05
+X119.1Y-4.8G85X118.5Y-4.8
+G05
 T0
 M30

output/gerbers/board/gerber/board.gbrjob

@@ -7,7 +7,7 @@
       "Application": "Pcbnew",
       "Version":     "5.1.5+dfsg1-2build2"
     },
-    "CreationDate":  "2021-11-11T22:32:06+00:00"
+    "CreationDate":  "2021-11-13T16:54:47+00:00"
   },
   "GeneralSpecs":
   {

output/gerbers/board/gerber/drill_report.rpt

@@ -1,5 +1,5 @@
 Drill report for output/routed_pcbs/board.kicad_pcb
-Created on Thu Nov 11 22:32:06 2021
+Created on Sat Nov 13 16:54:47 2021
 
 Copper Layer Stackup:
     =============================================================
@@ -10,21 +10,22 @@ Copper Layer Stackup:
 Drill file 'board.drl' contains
     plated through holes:
     =============================================================
-    T1  0.40mm  0.016"  (17 holes)
+    T1  0.40mm  0.016"  (24 holes)
     T2  0.90mm  0.035"  (8 holes)  (with 8 slots)
     T3  0.99mm  0.039"  (36 holes)
     T4  1.09mm  0.043"  (52 holes)
+    T5  1.30mm  0.051"  (2 holes)
 
-    Total plated holes count 113
+    Total plated holes count 122
 
 
 Not plated through holes are merged with plated holes
     unplated through holes:
     =============================================================
-    T5  0.90mm  0.035"  (4 holes)
+    T6  0.90mm  0.035"  (4 holes)
-    T6  1.20mm  0.047"  (4 holes)
+    T7  1.20mm  0.047"  (4 holes)
-    T7  1.70mm  0.067"  (36 holes)
+    T8  1.70mm  0.067"  (36 holes)
-    T8  3.00mm  0.118"  (72 holes)
+    T9  3.00mm  0.118"  (72 holes)
-    T9  3.43mm  0.135"  (18 holes)
+    T10  3.43mm  0.135"  (18 holes)
 
     Total unplated holes count 134

output/gerbers/bottom_plate/gerber/bottom_plate-CmtUser.gbr

@@ -1,11 +1,11 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.5+dfsg1-2build2*
-G04 #@! TF.CreationDate,2021-11-11T22:32:04+00:00*
+G04 #@! TF.CreationDate,2021-11-13T16:54:45+00:00*
 G04 #@! TF.ProjectId,bottom_plate,626f7474-6f6d-45f7-906c-6174652e6b69,VERSION_HERE*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Other,Comment*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-11 22:32:04*
+G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-13 16:54:45*
 %MOMM*%
 %LPD*%
 G04 APERTURE LIST*

output/gerbers/bottom_plate/gerber/bottom_plate-CuBottom.gbr

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.5+dfsg1-2build2*
-G04 #@! TF.CreationDate,2021-11-11T22:32:04+00:00*
+G04 #@! TF.CreationDate,2021-11-13T16:54:45+00:00*
 G04 #@! TF.ProjectId,bottom_plate,626f7474-6f6d-45f7-906c-6174652e6b69,VERSION_HERE*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Copper,L2,Bot*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-11 22:32:04*
+G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-13 16:54:45*
 %MOMM*%
 %LPD*%
 G04 APERTURE LIST*

output/gerbers/bottom_plate/gerber/bottom_plate-CuTop.gbr

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.5+dfsg1-2build2*
-G04 #@! TF.CreationDate,2021-11-11T22:32:04+00:00*
+G04 #@! TF.CreationDate,2021-11-13T16:54:45+00:00*
 G04 #@! TF.ProjectId,bottom_plate,626f7474-6f6d-45f7-906c-6174652e6b69,VERSION_HERE*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Copper,L1,Top*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-11 22:32:04*
+G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-13 16:54:45*
 %MOMM*%
 %LPD*%
 G04 APERTURE LIST*

output/gerbers/bottom_plate/gerber/bottom_plate-EdgeCuts.gbr

@@ -1,11 +1,11 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.5+dfsg1-2build2*
-G04 #@! TF.CreationDate,2021-11-11T22:32:04+00:00*
+G04 #@! TF.CreationDate,2021-11-13T16:54:45+00:00*
 G04 #@! TF.ProjectId,bottom_plate,626f7474-6f6d-45f7-906c-6174652e6b69,VERSION_HERE*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Profile,NP*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-11 22:32:04*
+G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-13 16:54:45*
 %MOMM*%
 %LPD*%
 G04 APERTURE LIST*

output/gerbers/bottom_plate/gerber/bottom_plate-MaskBottom.gbr

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.5+dfsg1-2build2*
-G04 #@! TF.CreationDate,2021-11-11T22:32:04+00:00*
+G04 #@! TF.CreationDate,2021-11-13T16:54:45+00:00*
 G04 #@! TF.ProjectId,bottom_plate,626f7474-6f6d-45f7-906c-6174652e6b69,VERSION_HERE*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Soldermask,Bot*
 G04 #@! TF.FilePolarity,Negative*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-11 22:32:04*
+G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-13 16:54:45*
 %MOMM*%
 %LPD*%
 G04 APERTURE LIST*

output/gerbers/bottom_plate/gerber/bottom_plate-MaskTop.gbr

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.5+dfsg1-2build2*
-G04 #@! TF.CreationDate,2021-11-11T22:32:04+00:00*
+G04 #@! TF.CreationDate,2021-11-13T16:54:45+00:00*
 G04 #@! TF.ProjectId,bottom_plate,626f7474-6f6d-45f7-906c-6174652e6b69,VERSION_HERE*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Soldermask,Top*
 G04 #@! TF.FilePolarity,Negative*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-11 22:32:04*
+G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-13 16:54:45*
 %MOMM*%
 %LPD*%
 G04 APERTURE LIST*

output/gerbers/bottom_plate/gerber/bottom_plate-PasteBottom.gbr

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.5+dfsg1-2build2*
-G04 #@! TF.CreationDate,2021-11-11T22:32:04+00:00*
+G04 #@! TF.CreationDate,2021-11-13T16:54:45+00:00*
 G04 #@! TF.ProjectId,bottom_plate,626f7474-6f6d-45f7-906c-6174652e6b69,VERSION_HERE*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Paste,Bot*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-11 22:32:04*
+G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-13 16:54:45*
 %MOMM*%
 %LPD*%
 G04 APERTURE LIST*

output/gerbers/bottom_plate/gerber/bottom_plate-PasteTop.gbr

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.5+dfsg1-2build2*
-G04 #@! TF.CreationDate,2021-11-11T22:32:04+00:00*
+G04 #@! TF.CreationDate,2021-11-13T16:54:45+00:00*
 G04 #@! TF.ProjectId,bottom_plate,626f7474-6f6d-45f7-906c-6174652e6b69,VERSION_HERE*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Paste,Top*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-11 22:32:04*
+G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-13 16:54:45*
 %MOMM*%
 %LPD*%
 G04 APERTURE LIST*

output/gerbers/bottom_plate/gerber/bottom_plate-SilkBottom.gbr

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.5+dfsg1-2build2*
-G04 #@! TF.CreationDate,2021-11-11T22:32:04+00:00*
+G04 #@! TF.CreationDate,2021-11-13T16:54:45+00:00*
 G04 #@! TF.ProjectId,bottom_plate,626f7474-6f6d-45f7-906c-6174652e6b69,VERSION_HERE*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Legend,Bot*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-11 22:32:04*
+G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-13 16:54:45*
 %MOMM*%
 %LPD*%
 G04 APERTURE LIST*

output/gerbers/bottom_plate/gerber/bottom_plate-SilkTop.gbr

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.5+dfsg1-2build2*
-G04 #@! TF.CreationDate,2021-11-11T22:32:04+00:00*
+G04 #@! TF.CreationDate,2021-11-13T16:54:45+00:00*
 G04 #@! TF.ProjectId,bottom_plate,626f7474-6f6d-45f7-906c-6174652e6b69,VERSION_HERE*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Legend,Top*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-11 22:32:04*
+G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-13 16:54:45*
 %MOMM*%
 %LPD*%
 G04 APERTURE LIST*

output/gerbers/bottom_plate/gerber/bottom_plate.gbrjob

@@ -7,7 +7,7 @@
       "Application": "Pcbnew",
       "Version":     "5.1.5+dfsg1-2build2"
     },
-    "CreationDate":  "2021-11-11T22:32:04+00:00"
+    "CreationDate":  "2021-11-13T16:54:45+00:00"
   },
   "GeneralSpecs":
   {

output/gerbers/bottom_plate/gerber/drill_report.rpt

@@ -1,5 +1,5 @@
 Drill report for output/routed_pcbs/bottom_plate.kicad_pcb
-Created on Thu Nov 11 22:32:04 2021
+Created on Sat Nov 13 16:54:45 2021
 
 Copper Layer Stackup:
     =============================================================

output/gerbers/top_plate/gerber/drill_report.rpt

@@ -1,5 +1,5 @@
 Drill report for output/routed_pcbs/top_plate.kicad_pcb
-Created on Thu Nov 11 22:31:45 2021
+Created on Sat Nov 13 16:54:27 2021
 
 Copper Layer Stackup:
     =============================================================

output/gerbers/top_plate/gerber/top_plate-CmtUser.gbr

@@ -1,11 +1,11 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.5+dfsg1-2build2*
-G04 #@! TF.CreationDate,2021-11-11T22:31:45+00:00*
+G04 #@! TF.CreationDate,2021-11-13T16:54:27+00:00*
 G04 #@! TF.ProjectId,top_plate,746f705f-706c-4617-9465-2e6b69636164,VERSION_HERE*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Other,Comment*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-11 22:31:45*
+G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-13 16:54:27*
 %MOMM*%
 %LPD*%
 G04 APERTURE LIST*

output/gerbers/top_plate/gerber/top_plate-CuBottom.gbr

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.5+dfsg1-2build2*
-G04 #@! TF.CreationDate,2021-11-11T22:31:45+00:00*
+G04 #@! TF.CreationDate,2021-11-13T16:54:26+00:00*
 G04 #@! TF.ProjectId,top_plate,746f705f-706c-4617-9465-2e6b69636164,VERSION_HERE*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Copper,L2,Bot*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-11 22:31:45*
+G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-13 16:54:26*
 %MOMM*%
 %LPD*%
 G04 APERTURE LIST*

output/gerbers/top_plate/gerber/top_plate-CuTop.gbr

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.5+dfsg1-2build2*
-G04 #@! TF.CreationDate,2021-11-11T22:31:45+00:00*
+G04 #@! TF.CreationDate,2021-11-13T16:54:26+00:00*
 G04 #@! TF.ProjectId,top_plate,746f705f-706c-4617-9465-2e6b69636164,VERSION_HERE*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Copper,L1,Top*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-11 22:31:45*
+G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-13 16:54:26*
 %MOMM*%
 %LPD*%
 G04 APERTURE LIST*

output/gerbers/top_plate/gerber/top_plate-EdgeCuts.gbr

@@ -1,11 +1,11 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.5+dfsg1-2build2*
-G04 #@! TF.CreationDate,2021-11-11T22:31:45+00:00*
+G04 #@! TF.CreationDate,2021-11-13T16:54:26+00:00*
 G04 #@! TF.ProjectId,top_plate,746f705f-706c-4617-9465-2e6b69636164,VERSION_HERE*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Profile,NP*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-11 22:31:45*
+G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-13 16:54:26*
 %MOMM*%
 %LPD*%
 G04 APERTURE LIST*

output/gerbers/top_plate/gerber/top_plate-MaskBottom.gbr

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.5+dfsg1-2build2*
-G04 #@! TF.CreationDate,2021-11-11T22:31:45+00:00*
+G04 #@! TF.CreationDate,2021-11-13T16:54:26+00:00*
 G04 #@! TF.ProjectId,top_plate,746f705f-706c-4617-9465-2e6b69636164,VERSION_HERE*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Soldermask,Bot*
 G04 #@! TF.FilePolarity,Negative*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-11 22:31:45*
+G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-13 16:54:26*
 %MOMM*%
 %LPD*%
 G04 APERTURE LIST*

output/gerbers/top_plate/gerber/top_plate-MaskTop.gbr

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.5+dfsg1-2build2*
-G04 #@! TF.CreationDate,2021-11-11T22:31:45+00:00*
+G04 #@! TF.CreationDate,2021-11-13T16:54:26+00:00*
 G04 #@! TF.ProjectId,top_plate,746f705f-706c-4617-9465-2e6b69636164,VERSION_HERE*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Soldermask,Top*
 G04 #@! TF.FilePolarity,Negative*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-11 22:31:45*
+G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-13 16:54:26*
 %MOMM*%
 %LPD*%
 G04 APERTURE LIST*

output/gerbers/top_plate/gerber/top_plate-PasteBottom.gbr

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.5+dfsg1-2build2*
-G04 #@! TF.CreationDate,2021-11-11T22:31:45+00:00*
+G04 #@! TF.CreationDate,2021-11-13T16:54:26+00:00*
 G04 #@! TF.ProjectId,top_plate,746f705f-706c-4617-9465-2e6b69636164,VERSION_HERE*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Paste,Bot*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-11 22:31:45*
+G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-13 16:54:26*
 %MOMM*%
 %LPD*%
 G04 APERTURE LIST*

output/gerbers/top_plate/gerber/top_plate-PasteTop.gbr

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.5+dfsg1-2build2*
-G04 #@! TF.CreationDate,2021-11-11T22:31:45+00:00*
+G04 #@! TF.CreationDate,2021-11-13T16:54:26+00:00*
 G04 #@! TF.ProjectId,top_plate,746f705f-706c-4617-9465-2e6b69636164,VERSION_HERE*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Paste,Top*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-11 22:31:45*
+G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-13 16:54:26*
 %MOMM*%
 %LPD*%
 G04 APERTURE LIST*

output/gerbers/top_plate/gerber/top_plate-SilkBottom.gbr

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.5+dfsg1-2build2*
-G04 #@! TF.CreationDate,2021-11-11T22:31:45+00:00*
+G04 #@! TF.CreationDate,2021-11-13T16:54:26+00:00*
 G04 #@! TF.ProjectId,top_plate,746f705f-706c-4617-9465-2e6b69636164,VERSION_HERE*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Legend,Bot*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-11 22:31:45*
+G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-13 16:54:26*
 %MOMM*%
 %LPD*%
 G04 APERTURE LIST*

output/gerbers/top_plate/gerber/top_plate-SilkTop.gbr

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.5+dfsg1-2build2*
-G04 #@! TF.CreationDate,2021-11-11T22:31:45+00:00*
+G04 #@! TF.CreationDate,2021-11-13T16:54:26+00:00*
 G04 #@! TF.ProjectId,top_plate,746f705f-706c-4617-9465-2e6b69636164,VERSION_HERE*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Legend,Top*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-11 22:31:45*
+G04 Created by KiCad (PCBNEW 5.1.5+dfsg1-2build2) date 2021-11-13 16:54:26*
 %MOMM*%
 %LPD*%
 G04 APERTURE LIST*

output/gerbers/top_plate/gerber/top_plate.gbrjob

@@ -7,7 +7,7 @@
       "Application": "Pcbnew",
       "Version":     "5.1.5+dfsg1-2build2"
     },
-    "CreationDate":  "2021-11-11T22:31:45+00:00"
+    "CreationDate":  "2021-11-13T16:54:27+00:00"
   },
   "GeneralSpecs":
   {

output/pcbs/board.dsn

@@ -149,12 +149,9 @@
     (component E73:SPDT_C128955::1
       (place T2 120000 10200 front 270)
     )
-    (component E73:SW_TACT_ALPS_SKQGABE010
+    (component kbd:ResetSW
       (place B1 107000 10200 front 270)
     )
-    (component E73:SW_TACT_ALPS_SKQGABE010::1
-      (place B2 107000 10200 front 270)
-    )
   )
   (library
     (image PG1350
@@ -397,33 +394,21 @@
       (pin Rect[B]Pad_900x900_um @5 -3700 -1100)
       (pin Rect[B]Pad_900x900_um @6 -3700 1100)
     )
-    (image E73:SW_TACT_ALPS_SKQGABE010
+    (image kbd:ResetSW
-      (outline (path signal 150  2750 -1250  1250 -2750))
+      (outline (path signal 150  3000 -1500  3000 -1750))
-      (outline (path signal 150  2750 1250  1250 2750))
+      (outline (path signal 150  3000 -1750  -3000 -1750))
-      (outline (path signal 150  2750 1250  2750 -1250))
+      (outline (path signal 150  -3000 -1750  -3000 -1500))
-      (outline (path signal 150  -1250 -2750  1250 -2750))
+      (outline (path signal 150  -3000 1500  -3000 1750))
-      (outline (path signal 150  -1250 2750  1250 2750))
+      (outline (path signal 150  -3000 1750  3000 1750))
-      (outline (path signal 150  -2750 -1250  -1250 -2750))
+      (outline (path signal 150  3000 1750  3000 1500))
-      (outline (path signal 150  -2750 1250  -1250 2750))
+      (outline (path signal 150  -3000 -1750  3000 -1750))
-      (outline (path signal 150  -2750 1250  -2750 -1250))
+      (outline (path signal 150  3000 -1750  3000 -1500))
-      (pin Rect[T]Pad_1800x1100_um 1 -3100 1850)
+      (outline (path signal 150  -3000 -1750  -3000 -1500))
-      (pin Rect[T]Pad_1800x1100_um 1@1 3100 1850)
+      (outline (path signal 150  -3000 1750  -3000 1500))
-      (pin Rect[T]Pad_1800x1100_um 2 -3100 -1850)
+      (outline (path signal 150  -3000 1750  3000 1750))
-      (pin Rect[T]Pad_1800x1100_um 2@1 3100 -1850)
+      (outline (path signal 150  3000 1750  3000 1500))
-    )
+      (pin Round[A]Pad_2000_um 2 -3250 0)
-    (image E73:SW_TACT_ALPS_SKQGABE010::1
+      (pin Round[A]Pad_2000_um 1 3250 0)
-      (outline (path signal 150  2750 -1250  1250 -2750))
-      (outline (path signal 150  2750 1250  1250 2750))
-      (outline (path signal 150  2750 1250  2750 -1250))
-      (outline (path signal 150  -1250 -2750  1250 -2750))
-      (outline (path signal 150  -1250 2750  1250 2750))
-      (outline (path signal 150  -2750 -1250  -1250 -2750))
-      (outline (path signal 150  -2750 1250  -1250 2750))
-      (outline (path signal 150  -2750 1250  -2750 -1250))
-      (pin Rect[B]Pad_1800x1100_um 1 -3100 1850)
-      (pin Rect[B]Pad_1800x1100_um 1@1 3100 1850)
-      (pin Rect[B]Pad_1800x1100_um 2 -3100 -1850)
-      (pin Rect[B]Pad_1800x1100_um 2@1 3100 -1850)
     )
     (padstack Round[A]Pad_1000_um
       (shape (circle F.Cu 1000))
@@ -440,6 +425,11 @@
       (shape (circle B.Cu 1905))
       (attach off)
     )
+    (padstack Round[A]Pad_2000_um
+      (shape (circle F.Cu 2000))
+      (shape (circle B.Cu 2000))
+      (attach off)
+    )
     (padstack Oval[A]Pad_1600x2200_um
       (shape (path F.Cu 1600  0 -300  0 300))
       (shape (path B.Cu 1600  0 -300  0 300))
@@ -494,10 +484,6 @@
       (shape (rect B.Cu -750 -750 750 750))
       (attach off)
     )
-    (padstack Rect[B]Pad_1800x1100_um
-      (shape (rect B.Cu -900 -550 900 550))
-      (attach off)
-    )
     (padstack Rect[T]Pad_2600x2600_um
       (shape (rect F.Cu -1300 -1300 1300 1300))
       (attach off)
@@ -532,10 +518,6 @@
       (shape (rect B.Cu -889 -889 889 889))
       (attach off)
     )
-    (padstack Rect[T]Pad_1800x1100_um
-      (shape (rect F.Cu -900 -550 900 550))
-      (attach off)
-    )
     (padstack "Via[0-1]_800:400_um"
       (shape (circle F.Cu 800))
       (shape (circle B.Cu 800))
@@ -632,11 +614,10 @@
       (pins MCU1-1 MCU2-1)
     )
     (net GND
-      (pins MCU1-2 MCU1-15 MCU1-16 MCU2-2 MCU2-15 MCU2-16 TRRS1-3 TRRS2-3 B1-1 B1-1@1
+      (pins MCU1-2 MCU1-15 MCU1-16 MCU2-2 MCU2-15 MCU2-16 TRRS1-3 TRRS2-3 B1-2)
-        B2-1 B2-1@1)
     )
     (net RST
-      (pins MCU1-3 MCU2-3 B1-2 B1-2@1 B2-2 B2-2@1)
+      (pins MCU1-3 MCU2-3 B1-1)
     )
     (net VCC
       (pins MCU1-4 MCU2-4 TRRS1-2 TRRS2-2)

output/pcbs/board.kicad_pcb

@@ -2221,64 +2221,37 @@
         
         
 
+            (module kbd:ResetSW (layer F.Cu) (tedit 5B9559E6) (tstamp 61905781)
 
-    (module E73:SW_TACT_ALPS_SKQGABE010 (layer F.Cu) (tstamp 5BF2CC94)
+                (descr "Two pin through hole Tactile Switch, the same as on the Corne")
+                (tags "Tactile Switch")
 
-        (descr "Low-profile SMD Tactile Switch, https://www.e-switch.com/product-catalog/tact/product-lines/tl3342-series-low-profile-smt-tact-switch")
+                (at 107 -10.2 270)
-        (tags "SPST Tactile Switch")
                 
-        (at 107 -10.2 270)
+                (fp_text reference "B1" (at 0 2.55) (layer F.SilkS) hide (effects (font (size 1 1) (thickness 0.15))))
-        
+                (fp_text value "" (at 0 -2.55) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))))
-        (fp_text reference "B1" (at 0 0) (layer F.SilkS) hide (effects (font (size 1.27 1.27) (thickness 0.15))))
-        (fp_text value "" (at 0 0) (layer F.SilkS) hide (effects (font (size 1.27 1.27) (thickness 0.15))))
 
                 
-        (fp_line (start 2.75 1.25) (end 1.25 2.75) (layer F.SilkS) (width 0.15))
+                (fp_text user RESET (at 0 0 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))))
-        (fp_line (start 2.75 -1.25) (end 1.25 -2.75) (layer F.SilkS) (width 0.15))
+                (fp_text user RESET (at 0.127 0 270) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)))
-        (fp_line (start 2.75 -1.25) (end 2.75 1.25) (layer F.SilkS) (width 0.15))
+
-        (fp_line (start -1.25 2.75) (end 1.25 2.75) (layer F.SilkS) (width 0.15))
+                (fp_line (start 3 1.5) (end 3 1.75) (layer B.SilkS) (width 0.15))
-        (fp_line (start -1.25 -2.75) (end 1.25 -2.75) (layer F.SilkS) (width 0.15))
+                (fp_line (start 3 1.75) (end -3 1.75) (layer B.SilkS) (width 0.15))
-        (fp_line (start -2.75 1.25) (end -1.25 2.75) (layer F.SilkS) (width 0.15))
+                (fp_line (start -3 1.75) (end -3 1.5) (layer B.SilkS) (width 0.15))
-        (fp_line (start -2.75 -1.25) (end -1.25 -2.75) (layer F.SilkS) (width 0.15))
+                (fp_line (start -3 -1.5) (end -3 -1.75) (layer B.SilkS) (width 0.15))
-        (fp_line (start -2.75 -1.25) (end -2.75 1.25) (layer F.SilkS) (width 0.15))
+                (fp_line (start -3 -1.75) (end 3 -1.75) (layer B.SilkS) (width 0.15))
+                (fp_line (start 3 -1.75) (end 3 -1.5) (layer B.SilkS) (width 0.15))
+                (fp_line (start -3 1.75) (end 3 1.75) (layer F.SilkS) (width 0.15))
+                (fp_line (start 3 1.75) (end 3 1.5) (layer F.SilkS) (width 0.15))
+                (fp_line (start -3 1.75) (end -3 1.5) (layer F.SilkS) (width 0.15))
+                (fp_line (start -3 -1.75) (end -3 -1.5) (layer F.SilkS) (width 0.15))
+                (fp_line (start -3 -1.75) (end 3 -1.75) (layer F.SilkS) (width 0.15))
+                (fp_line (start 3 -1.75) (end 3 -1.5) (layer F.SilkS) (width 0.15))
 
                 
-        (pad 1 smd rect (at -3.1 -1.85 270) (size 1.8 1.1) (layers F.Cu F.Paste F.Mask) (net 29 "GND"))
+                (pad 2 thru_hole circle (at -3.25 0 270) (size 2 2) (drill 1.3) (layers *.Cu *.Mask F.SilkS) (net 29 "GND"))
-        (pad 1 smd rect (at 3.1 -1.85 270) (size 1.8 1.1) (layers F.Cu F.Paste F.Mask) (net 29 "GND"))
+                (pad 1 thru_hole circle (at 3.25 0 270) (size 2 2) (drill 1.3) (layers *.Cu *.Mask F.SilkS) (net 30 "RST"))
-        (pad 2 smd rect (at -3.1 1.85 270) (size 1.8 1.1) (layers F.Cu F.Paste F.Mask) (net 30 "RST"))
+            )
-        (pad 2 smd rect (at 3.1 1.85 270) (size 1.8 1.1) (layers F.Cu F.Paste F.Mask) (net 30 "RST"))
-    )
-    
-    
-
-    
-    (module E73:SW_TACT_ALPS_SKQGABE010 (layer F.Cu) (tstamp 5BF2CC94)
-
-        (descr "Low-profile SMD Tactile Switch, https://www.e-switch.com/product-catalog/tact/product-lines/tl3342-series-low-profile-smt-tact-switch")
-        (tags "SPST Tactile Switch")
-
-        (at 107 -10.2 270)
-        
-        (fp_text reference "B2" (at 0 0) (layer F.SilkS) hide (effects (font (size 1.27 1.27) (thickness 0.15))))
-        (fp_text value "" (at 0 0) (layer F.SilkS) hide (effects (font (size 1.27 1.27) (thickness 0.15))))
-        
-        
-        (fp_line (start 2.75 1.25) (end 1.25 2.75) (layer B.SilkS) (width 0.15))
-        (fp_line (start 2.75 -1.25) (end 1.25 -2.75) (layer B.SilkS) (width 0.15))
-        (fp_line (start 2.75 -1.25) (end 2.75 1.25) (layer B.SilkS) (width 0.15))
-        (fp_line (start -1.25 2.75) (end 1.25 2.75) (layer B.SilkS) (width 0.15))
-        (fp_line (start -1.25 -2.75) (end 1.25 -2.75) (layer B.SilkS) (width 0.15))
-        (fp_line (start -2.75 1.25) (end -1.25 2.75) (layer B.SilkS) (width 0.15))
-        (fp_line (start -2.75 -1.25) (end -1.25 -2.75) (layer B.SilkS) (width 0.15))
-        (fp_line (start -2.75 -1.25) (end -2.75 1.25) (layer B.SilkS) (width 0.15))
-        
-        
-        (pad 1 smd rect (at -3.1 -1.85 270) (size 1.8 1.1) (layers B.Cu B.Paste B.Mask) (net 29 "GND"))
-        (pad 1 smd rect (at 3.1 -1.85 270) (size 1.8 1.1) (layers B.Cu B.Paste B.Mask) (net 29 "GND"))
-        (pad 2 smd rect (at -3.1 1.85 270) (size 1.8 1.1) (layers B.Cu B.Paste B.Mask) (net 30 "RST"))
-        (pad 2 smd rect (at 3.1 1.85 270) (size 1.8 1.1) (layers B.Cu B.Paste B.Mask) (net 30 "RST"))
-    )
-    
             
 
             (gr_text "samoklava v0.1\nby soundmonster" (at 31.5 0 0) (layer F.SilkS)

package-lock.json

@@ -8,6 +8,34 @@
                 "ergogen": "github:soundmonster/ergogen#samoklava"
             }
         },
+        "../../ergogen": {
+            "version": "3.0.0",
+            "extraneous": true,
+            "license": "MIT",
+            "dependencies": {
+                "@jscad/openjscad": "github:mrzealot/oldjscad",
+                "fs-extra": "^9.0.1",
+                "js-yaml": "^3.14.0",
+                "kle-serial": "github:mrzealot/kle-serial",
+                "makerjs": "github:mrzealot/maker.js-dist",
+                "mathjs": "^8.1.1",
+                "yargs": "^15.4.1"
+            },
+            "bin": {
+                "ergogen": "src/cli.js"
+            },
+            "devDependencies": {
+                "@rollup/plugin-commonjs": "^13.0.2",
+                "@rollup/plugin-replace": "^2.3.3",
+                "chai": "^4.2.0",
+                "chai-as-promised": "^7.1.1",
+                "dir-compare": "^3.3.0",
+                "glob": "^7.1.6",
+                "mocha": "^8.1.3",
+                "nyc": "^15.1.0",
+                "rollup": "^2.22.1"
+            }
+        },
         "node_modules/@danmarshall/jscad-typings": {
             "version": "1.0.0",
             "resolved": "https://registry.npmjs.org/@danmarshall/jscad-typings/-/jscad-typings-1.0.0.tgz",
@@ -336,7 +364,7 @@
         },
         "node_modules/ergogen": {
             "version": "3.0.0",
-            "resolved": "git+ssh://git@github.com/soundmonster/ergogen.git#a6cb37ffd45940694b9b6ecda40917a95a24ecb2",
+            "resolved": "git+ssh://git@github.com/soundmonster/ergogen.git#3083b1672cde99659943a08959753f31bcfe88b8",
             "license": "MIT",
             "dependencies": {
                 "@jscad/openjscad": "github:mrzealot/oldjscad",
@@ -389,9 +417,9 @@
             }
         },
         "node_modules/fraction.js": {
-            "version": "4.1.1",
+            "version": "4.1.2",
-            "resolved": "https://registry.npmjs.org/fraction.js/-/fraction.js-4.1.1.tgz",
+            "resolved": "https://registry.npmjs.org/fraction.js/-/fraction.js-4.1.2.tgz",
-            "integrity": "sha512-MHOhvvxHTfRFpF1geTK9czMIZ6xclsEor2wkIGYYq+PxcQqT7vStJqjhe6S1TenZrMZzo+wlqOufBDVepUEgPg==",
+            "integrity": "sha512-o2RiJQ6DZaR/5+Si0qJUIy637QMRudSi9kU/FFzx9EZazrIdnBgpU+3sEWCxAVhH2RtxW2Oz+T4p2o8uOPVcgA==",
             "engines": {
                 "node": "*"
             },
@@ -1090,7 +1118,7 @@
             "integrity": "sha512-MSjYzcWNOA0ewAHpz0MxpYFvwg6yjy1NG3xteoqz644VCo/RPgnr1/GGt+ic3iJTzQ8Eu3TdM14SawnVUmGE6A=="
         },
         "ergogen": {
-            "version": "git+ssh://git@github.com/soundmonster/ergogen.git#a6cb37ffd45940694b9b6ecda40917a95a24ecb2",
+            "version": "git+ssh://git@github.com/soundmonster/ergogen.git#3083b1672cde99659943a08959753f31bcfe88b8",
             "from": "ergogen@github:soundmonster/ergogen#samoklava",
             "requires": {
                 "@jscad/openjscad": "github:mrzealot/oldjscad",
@@ -1127,9 +1155,9 @@
             }
         },
         "fraction.js": {
-            "version": "4.1.1",
+            "version": "4.1.2",
-            "resolved": "https://registry.npmjs.org/fraction.js/-/fraction.js-4.1.1.tgz",
+            "resolved": "https://registry.npmjs.org/fraction.js/-/fraction.js-4.1.2.tgz",
-            "integrity": "sha512-MHOhvvxHTfRFpF1geTK9czMIZ6xclsEor2wkIGYYq+PxcQqT7vStJqjhe6S1TenZrMZzo+wlqOufBDVepUEgPg=="
+            "integrity": "sha512-o2RiJQ6DZaR/5+Si0qJUIy637QMRudSi9kU/FFzx9EZazrIdnBgpU+3sEWCxAVhH2RtxW2Oz+T4p2o8uOPVcgA=="
         },
         "fs-extra": {
             "version": "9.1.0",

samoklava.yaml

@@ -403,7 +403,7 @@ pcbs:
         nets:
           from: Braw
           to: Bplus
-      reset_l:
+      reset:
         type: button
         anchor:
           ref:
@@ -411,19 +411,7 @@ pcbs:
           shift: [17, 0]
           rotate: 270
         params:
-          side: F
+          variant: 2_pin_th
-        nets:
-          from: GND
-          to: RST
-      reset_r:
-        type: button
-        anchor:
-          ref:
-            - matrix_inner_bottom
-          shift: [17, 0]
-          rotate: 270
-        params:
-          side: B
         nets:
           from: GND
           to: RST