Updating readme.

README.org

@@ -1,12 +1,21 @@
 * rae-dux
 | [[images/board-front.png]] | [[images/board-back.png]] |
 
-The rae-dux is a keyboard inspired by the [[https://github.com/tapioki/cephalopoda/tree/main/Architeuthis%20dux][Architeuthis Dux]] and built using the [[https://github.com/soundmonster/samoklava][samoklava workflow]].
+The rae-dux is a 36-key (diodeless!), wireless keyboard inspired by the [[https://github.com/tapioki/cephalopoda/tree/main/Architeuthis%20dux][Architeuthis Dux]].
+This project used to use the [[https://github.com/soundmonster/samoklava][samoklava workflow]], however the auto-router had
+troubles with the splay, currently I just use the image generating parts of the
+samoklava workflow.
 
 *Has yet to be printed and tested!*
 
-** Changes from samoklava
+** Important Notes
-- Added a-dux like splay, fitted to my hand
+- Wireless only, the 36-key diodeless approach uses the P0 pin which is usually dedicated to TRRS
-  + Filled in holes that came from the new splay by using the bind functionality
+- Their is only one MCU footprint, so one controller has to be flipped (I assume
-  + *Important*: had to ensure that the MCU footprint was upright otherwise auto-routing failed
+   if you can get this printed you can figure out the correct orientation)
-- Removed case holes and case
+- The [[./rae-dux.yaml][rae-dux.yaml]] file relies on [[https://github.com/andrewjrae/ergogen/tree/rae-dux][my fork of ergogen]] which naturally relies on
+  [[https://github.com/soundmonster/ergogen/tree/samoklava][soundmonster's fork of ergogen]], and a simple JST battery footprint inspired by
+  [[https://github.com/benvallack][@benvallack]].
+- If you want to skip out on the switch, there is no jumper to use the JST
+  connector, so you'll have to bodge a wire somewhere, or try shorting the
+  switch footprint.
+- Kicad files are 6.0, so unfortunately not backwards compatible.