qmk_firmware/drivers/avr/i2c_master.c

/* Library made by: g4lvanix
 * Github repository: https://github.com/g4lvanix/I2C-master-lib
 */

#include <avr/io.h>
#include <util/twi.h>

#include "i2c_master.h"
#include "timer.h"

#define F_SCL 400000UL // SCL frequency
#define Prescaler 1
#define TWBR_val ((((F_CPU / F_SCL) / Prescaler) - 16 ) / 2)

void i2c_init(void)
{
  TWSR = 0;     /* no prescaler */
	TWBR = (uint8_t)TWBR_val;
  //TWBR = 10;
}

uint8_t i2c_start(uint8_t address)
{
	// reset TWI control register
	TWCR = 0;
	// transmit START condition
	TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);

  #ifdef I2C_TIMEOUT
    uint16_t timeout_timer = timer_read();
    while( !(TWCR & (1<<TWINT)) ) {
      if ((timer_read() - timeout_timer) > I2C_TIMEOUT) {
        return 2; // should make these codes standard
      }
    }
  #else
  // wait for end of transmission
    while( !(TWCR & (1<<TWINT)) );
  #endif

	// check if the start condition was successfully transmitted
	if(((TW_STATUS & 0xF8) != TW_START) && ((TW_STATUS & 0xF8) != TW_REP_START)){ return 1; }

	// load slave address into data register
	TWDR = address;
	// start transmission of address
	TWCR = (1<<TWINT) | (1<<TWEN);

  #ifdef I2C_TIMEOUT
    timeout_timer = timer_read();
    while( !(TWCR & (1<<TWINT)) ) {
      if ((timer_read() - timeout_timer) > I2C_TIMEOUT) {
        return 2; // should make these codes standard
      }
    }
  #else
  // wait for end of transmission
    while( !(TWCR & (1<<TWINT)) );
  #endif

	// check if the device has acknowledged the READ / WRITE mode
	uint8_t twst = TW_STATUS & 0xF8;
	if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return 1;

	return 0;
}

uint8_t i2c_write(uint8_t data)
{
	// load data into data register
	TWDR = data;
	// start transmission of data
	TWCR = (1<<TWINT) | (1<<TWEN);

  #ifdef I2C_TIMEOUT
    uint16_t timeout_timer = timer_read();
    while( !(TWCR & (1<<TWINT)) ) {
      if ((timer_read() - timeout_timer) > I2C_TIMEOUT) {
        return 2; // should make these codes standard
      }
    }
  #else
	// wait for end of transmission
    while( !(TWCR & (1<<TWINT)) );
  #endif

	if( (TW_STATUS & 0xF8) != TW_MT_DATA_ACK ){ return 1; }

	return 0;
}

uint8_t i2c_read_ack(void)
{

	// start TWI module and acknowledge data after reception
	TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWEA);

  #ifdef I2C_TIMEOUT
    uint16_t timeout_timer = timer_read();
    while( !(TWCR & (1<<TWINT)) ) {
      if ((timer_read() - timeout_timer) > I2C_TIMEOUT) {
        return 2; // should make these codes standard
      }
    }
  #else
  // wait for end of transmission
    while( !(TWCR & (1<<TWINT)) );
  #endif

	// return received data from TWDR
	return TWDR;
}

uint8_t i2c_read_nack(void)
{

	// start receiving without acknowledging reception
	TWCR = (1<<TWINT) | (1<<TWEN);

    #ifdef I2C_TIMEOUT
    uint16_t timeout_timer = timer_read();
    while( !(TWCR & (1<<TWINT)) ) {
      if ((timer_read() - timeout_timer) > I2C_TIMEOUT) {
        return 2; // should make these codes standard
      }
    }
  #else
  // wait for end of transmission
    while( !(TWCR & (1<<TWINT)) );
  #endif

	// return received data from TWDR
	return TWDR;
}

uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length)
{
	if (i2c_start(address | I2C_WRITE)) return 1;

	for (uint16_t i = 0; i < length; i++)
	{
		if (i2c_write(data[i])) return 1;
	}

	i2c_stop();

	return 0;
}

uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length)
{
	if (i2c_start(address | I2C_READ)) return 1;

	for (uint16_t i = 0; i < (length-1); i++)
	{
		data[i] = i2c_read_ack();
	}
	data[(length-1)] = i2c_read_nack();

	i2c_stop();

	return 0;
}

uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length)
{
	if (i2c_start(devaddr | 0x00)) return 1;

	i2c_write(regaddr);

	for (uint16_t i = 0; i < length; i++)
	{
		if (i2c_write(data[i])) return 1;
	}

	i2c_stop();

	return 0;
}

uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length)
{
	if (i2c_start(devaddr)) return 1;

	i2c_write(regaddr);

	if (i2c_start(devaddr | 0x01)) return 1;

	for (uint16_t i = 0; i < (length-1); i++)
	{
		data[i] = i2c_read_ack();
	}
	data[(length-1)] = i2c_read_nack();

	i2c_stop();

	return 0;
}

uint8_t i2c_stop(void)
{
	// transmit STOP condition
	TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);

  #ifdef I2C_TIMEOUT
    uint16_t timeout_timer = timer_read();
    while(TWCR & (1<<TWSTO)) {
        if ((timer_read() - timeout_timer) > I2C_TIMEOUT) {
        return 2; // should make these codes standard
      }
    }
  #else
    // wait for end of transmission
    while(TWCR & (1<<TWSTO));
  #endif

  return 0;
}