1
0
Fork 0

Configurable serial usart timeout (#11057)

This commit is contained in:
XScorpion2 2020-11-29 10:28:03 -06:00 committed by James Young
parent 485e4524f4
commit 990d5189d1
No known key found for this signature in database
GPG key ID: 8E1085BF6FCFBD74
2 changed files with 9 additions and 5 deletions

View file

@ -60,6 +60,7 @@ Configure the hardware via your config.h:
// 5: about 19200 baud
#define SERIAL_USART_DRIVER SD1 // USART driver of TX pin. default: SD1
#define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
#define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100
```
You must also enable the ChibiOS `SERIAL` feature:

View file

@ -58,7 +58,10 @@
# error invalid SELECT_SOFT_SERIAL_SPEED value
#endif
#define TIMEOUT 100
#ifndef SERIAL_USART_TIMEOUT
# define SERIAL_USART_TIMEOUT 100
#endif
#define HANDSHAKE_MAGIC 7
static inline msg_t sdWriteHalfDuplex(SerialDriver* driver, uint8_t* data, uint8_t size) {
@ -201,21 +204,21 @@ int soft_serial_transaction(int index) {
sdClear(&SERIAL_USART_DRIVER);
// First chunk is always transaction id
sdWriteTimeout(&SERIAL_USART_DRIVER, &sstd_index, sizeof(sstd_index), TIME_MS2I(TIMEOUT));
sdWriteTimeout(&SERIAL_USART_DRIVER, &sstd_index, sizeof(sstd_index), TIME_MS2I(SERIAL_USART_TIMEOUT));
uint8_t sstd_index_shake = 0xFF;
// Which we always read back first so that we can error out correctly
// - due to the half duplex limitations on return codes, we always have to read *something*
// - without the read, write only transactions *always* succeed, even during the boot process where the slave is not ready
res = sdReadTimeout(&SERIAL_USART_DRIVER, &sstd_index_shake, sizeof(sstd_index_shake), TIME_MS2I(TIMEOUT));
res = sdReadTimeout(&SERIAL_USART_DRIVER, &sstd_index_shake, sizeof(sstd_index_shake), TIME_MS2I(SERIAL_USART_TIMEOUT));
if (res < 0 || (sstd_index_shake != (sstd_index ^ HANDSHAKE_MAGIC))) {
dprintf("serial::usart_shake NO_RESPONSE\n");
return TRANSACTION_NO_RESPONSE;
}
if (trans->initiator2target_buffer_size) {
res = sdWriteTimeout(&SERIAL_USART_DRIVER, trans->initiator2target_buffer, trans->initiator2target_buffer_size, TIME_MS2I(TIMEOUT));
res = sdWriteTimeout(&SERIAL_USART_DRIVER, trans->initiator2target_buffer, trans->initiator2target_buffer_size, TIME_MS2I(SERIAL_USART_TIMEOUT));
if (res < 0) {
dprintf("serial::usart_transmit NO_RESPONSE\n");
return TRANSACTION_NO_RESPONSE;
@ -223,7 +226,7 @@ int soft_serial_transaction(int index) {
}
if (trans->target2initiator_buffer_size) {
res = sdReadTimeout(&SERIAL_USART_DRIVER, trans->target2initiator_buffer, trans->target2initiator_buffer_size, TIME_MS2I(TIMEOUT));
res = sdReadTimeout(&SERIAL_USART_DRIVER, trans->target2initiator_buffer, trans->target2initiator_buffer_size, TIME_MS2I(SERIAL_USART_TIMEOUT));
if (res < 0) {
dprintf("serial::usart_receive NO_RESPONSE\n");
return TRANSACTION_NO_RESPONSE;