1
0
Fork 0
qmk_firmware/keyboards/acheron/austin/readme.md
Joel Challis a2081171de
[keyboard] Austin (#8176)
* Add austin keyboard

* Update to use spi ws2812 driver

* remove rgb
2020-02-18 00:54:15 +00:00

29 lines
No EOL
1.8 KiB
Markdown
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# Acheron Aχξρων 1800CP-SM-S-STM32-MX-TH-WI (codename "Austin") QMK firmware
<p align="center">
<img align="middle" src="https://raw.githubusercontent.com/Gondolindrim/acheronLibrary/master/graphics/acheronLong.png" width="400">
</p>
## Introduction
This is the QMK firmware repository for the Austin, updated until [revision Alpha](https://github.com/Gondolindrim/Austin/releases/tag/Alpha).
The AustinPCB is an Open-Hardware guidelines compliant PCB which files can be found at [this link](https://github.com/Gondolindrim/Austin). Its designer and maintainer is [Gondolindrim](https://github.com/Gondolindrim).
The Austin keyboard is a collaboration between Gondolindrim, DriftingBunnies from DriftMechanics and PheonixStarr from Nightingale Studios.
See the [IC page](https://geekhack.org/index.php?topic=100883) and the [GB page](https://geekhack.org/index.php?topic=102542) for further information. The GB was the only known way to obtain an Austin from the official vendor.
## PCB Documentation
See the [AcheronDocs](https://gondolindrim.github.io/AcheronDocs/austin/intro.html) page for the AustinPCB full documentation. You can also check the KiCad PCB files at the [Austin GitHub repository](https://github.com/Gondolindrim/Austin).
Before using the files for personal or commercial use, please read the [Acheron Open-Hardware License V1.2](https://gondolindrim.github.io/AcheronDocs/license/license.html) under which the Austin PCB is published.
## How to compile
After setting up your build environment, you can compile the Austin default keymap by using:
make acheron/austin:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).