104 lines
No EOL
5.8 KiB
Markdown
104 lines
No EOL
5.8 KiB
Markdown
# Kyria's lw Keymap
|
||
|
||
Custom keymap for the [kyria keyboard](https://blog.splitkb.com/blog/introducing-the-kyria). It is intended to be used with an *English (US, intl. with dead keys)* keyboard layout (includes the `keymap_us_international.h` header).
|
||
|
||
This layout is mainly designed for every day writing in either English, French or German and programming.
|
||
|
||
The layout implements all accents and symbols (leveraging dead keys) found on a **swiss** keyboard. It uses Unicode for special characters. It makes use of the [Linux built-in IBus Unicode input](https://docs.qmk.fm/#/feature_unicode?id=input-modes) and relies on [WinCompose](https://github.com/samhocevar/wincompose) for Windows.
|
||
|
||
## Build this keymap
|
||
```bash
|
||
qmk compile -kb splitkb/kyria/rev1 -km lw
|
||
```
|
||
|
||
## Flash this keymap
|
||
|
||
> **Note**: this was tested for an Elite-C microcontroller.
|
||
|
||
First, check that the bootloader is visible. For instance:
|
||
```bash
|
||
$ lsusb
|
||
...
|
||
Bus 001 Device 034: ID 03eb:2ff4 Atmel Corp. atmega32u4 DFU bootloader
|
||
...
|
||
```
|
||
If the bootloader is not visible, press the reset button of the microcontroller. The bootloader should become visible when running the `lsusb` command again.
|
||
|
||
The microcontroller can now be flashed:
|
||
```bash
|
||
qmk flash -kb splitkb/kyria/rev1 -km lw
|
||
```
|
||
> **Note**: if there is any issue, run `qmk doctor` to see whether the qmk configuration is valid.
|
||
|
||
## Implemented keymaps
|
||
The default keymap contains 5 layers which allows it to include all keys found on an ANSI layout TKL keyboard plus media keys.
|
||
Hardware features of the Kyria such as OLEDs, rotary encoders and underglow are also supported.
|
||
|
||
The five different layers are the following:
|
||
1. Base layer (QWERTZ)
|
||
2. Symbols/Numbers layer
|
||
3. Navigation layer
|
||
|
||
### Base layer
|
||
This layer is activated by default.
|
||
|
||
```
|
||
/*
|
||
* 0. Base Layer: QWERTZ
|
||
*
|
||
* ,-------------------------------------------. ,-------------------------------------------.
|
||
* | Esc | Q | W | E | R | T | | Z | U | I | O | P | Del |
|
||
* |--------+------+------+------+------+------| |------+------+------+------+------+--------|
|
||
* | Tab | A | S | D | F | G | | H | J | K | L | ' " | BkSpace|
|
||
* |--------+------+------+------+------+------+-------------. ,-------------+------+------+------+------+------+--------|
|
||
* | LShift | Y | X | C | V | B | \ | | ` ~ | | ( | ) | N | M | , < | . > | ; : | CpLock |
|
||
* `----------------------+------+------+------+------+------| |------+------+------+------+------+----------------------'
|
||
* |LCtrl | LGUI | LAlt | Space| MO(1)| | MO(2)| Enter| - _ | ! | / ? |
|
||
* | | | | | | | |/shift| | | |
|
||
* `----------------------------------' `----------------------------------'
|
||
*/
|
||
```
|
||
|
||
Hold down the `Enter` key to make it a shift. This compensates for the poor placement of the dedicated `LShift` key.
|
||
|
||
### Symbol layer
|
||
This layer is activated when holding `MO(1)`.
|
||
|
||
```
|
||
/*
|
||
* 1. Sym Layer: Numbers and symbols
|
||
*
|
||
* ,-------------------------------------------. ,-------------------------------------------.
|
||
* | F1 | F2 | F3 | F4 | LAlt | PASTE| | , | 7 | 8 | 9 | * | / |
|
||
* |--------+------+------+------+------+------| |------+------+------+------+------+--------|
|
||
* | F5 | F6 | F7 | F8 | @ | COPY | | . | 6 | 7 | 8 | = | |
|
||
* |--------+------+------+------+------+------+-------------. ,-------------+------+------+------+------+------+--------|
|
||
* | F9 | F10 | F11 | F12 | & | CUT | UNDO | FIND | | [ | ] | 0 | 1 | 2 | 3 | + | - |
|
||
* `----------------------+------+------+------+------+------| |------+------+------+------+------+----------------------'
|
||
* | $ | # | % | | MO(1)| | MO(2)| | \ | | { | } |
|
||
* | | | | | | | | | | | |
|
||
* `----------------------------------' `----------------------------------'
|
||
*/
|
||
```
|
||
|
||
### Navigation layer
|
||
This layer is activated when holding `MO(2)`.
|
||
|
||
```
|
||
/*
|
||
* 2. Nav Layer: Media, navigation, accents
|
||
*
|
||
* ,-------------------------------------------. ,-------------------------------------------.
|
||
* | | Brt+ | Next | Fwd | Play | Vol+ | | Home | PgUp | Up | PgDn | | Del |
|
||
* |--------+------+------+------+------+------| |------+------+------+------+------+--------|
|
||
* | | Brt- | Prev | Bckw | Stop | Vol- | | End | Left | Down | Right|ScrLck| BkSpace|
|
||
* |--------+------+------+------+------+------+-------------. ,-------------+------+------+------+------+------+--------|
|
||
* | LShift | ´ | ` | ^ | ¨ | Mute | |UC_MOD| |RShift| Menu | PrtSc| ç/Ç | § ° | | SAVE | Insert |
|
||
* `----------------------+------+------+------+------+------| |------+------+------+------+------+----------------------'
|
||
* |LCtrl | LGUI | LAlt | | MO(1)| | MO(2)| UNDO | CUT | COPY | PASTE|
|
||
* | | | | | | | | | | | |
|
||
* `----------------------------------' `----------------------------------'
|
||
*/
|
||
```
|
||
|
||
The key `UC_MOD` allows to switch between Linux and Windows unicode. Note however that [WinCompose](https://github.com/samhocevar/wincompose) must be installed on Windows (simply download and install the latest release and it will run). |