![Purdea Andrei](/assets/img/avatar_default.png)
* Add initial implementation of 5 keyboards supported by the OverNumpad Controller. * Apply suggestions from code review Co-authored-by: Drashna Jaelre <drashna@live.com> * Apply changes similar to other code review suggestions. * Apply suggestions from code review Co-authored-by: Drashna Jaelre <drashna@live.com> * Apply changes similar to other code review suggestions. * overnumpad controller info.jsons: update maintainer and url. * classic_ultracl_pre_2013: added support for the default 'fullsize_ansi' layout * classic_ultracl_pre_2013: moved the order of the iso enter key in the layout macro to be considered to be on the bottom row, like in the default fullsize_iso layout. Rename the iso layout to fullsize_iso, and enable it in rules.mk * Removed QMKBEST and QMKURL * Apply suggestions from code review Co-authored-by: Ryan <fauxpark@gmail.com> * Deleting empty files Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com>
29 lines
1.6 KiB
Markdown
29 lines
1.6 KiB
Markdown
# unicomp/classic_ultracl_post_2013/overnumpad_1xb
|
|
|
|
![unicomp/classic_ultracl_post_2013/overnumpad_1xb](https://www.pckeyboard.com/mm5/graphics/00000001/UB4ZPHA_800x343.jpg)
|
|
|
|
Will support the following Unicomp Classic and Ultra Classic keyboards:
|
|
* 104-key ANSI and 105-key ISO keyboards with post-2013 bottom row are supported.
|
|
* It will likely also support 103-key ANSI or 104-key ISO keyboard variants (not tested) (these are the keyboards with no menu key)
|
|
* At this point in time it's unclear if it supports 101-key keyboard variants built after 2013.
|
|
|
|
* Keyboard Maintainer: [Purdea Andrei](https://github.com/purdeaandrei)
|
|
* Hardware Supported: OverNumpad controller v1.Xb
|
|
* Hardware Availability:
|
|
* [controller](https://github.com/purdeaandrei/overnumpad_controller_1xb)
|
|
* [keyboard](https://www.pckeyboard.com/)
|
|
|
|
To place the keyboard into bootloader mode in order to flash it, hold the ESC key while plugging the board in.
|
|
It's possible to make this feature not work, by flashing the wrong firmware onto the keyboard.
|
|
If that happens, open up the keyboard, and press the RST&PROG button to enter bootloader mode.
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make unicomp/classic_ultracl_post_2013/overnumpad_1xb:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make unicomp/classic_ultracl_post_2013/overnumpad_1xb:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|