6823f01c10
Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: keyaki-namiki <28521374+keyaki-namiki@users.noreply.github.com>
34 lines
1.3 KiB
Markdown
34 lines
1.3 KiB
Markdown
# navpad 1.0 with Helix (Right hand side)
|
|
|
|
|
|
|
|
Navpad connected with helix keyboard (Right Side)
|
|
|
|
* Keyboard Maintainer: [yushakobo](https://github.com/yushakobo)
|
|
* Hardware Supported: Navpad 1.0 PCB and Helix PCB, Pro Micro
|
|
* Hardware Availability: https://shop.yushakobo.jp/products/navpad-10
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make yushakobo/navpad/10_helix_r:default
|
|
|
|
Flashing examples for this keyboard...
|
|
|
|
Helix side:
|
|
|
|
make yushakobo/navpad/10_helix_r:default:avrdude-split-right
|
|
|
|
Navpad side:
|
|
|
|
make yushakobo/navpad/10_helix_r:default:avrdude-split-left
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
|