26 lines
1.8 KiB
Org Mode
26 lines
1.8 KiB
Org Mode
* rae-dux
|
|
| [[images/board-front.png]] | [[images/board-back.png]] |
|
|
|
|
The rae-dux is a 36-key (diodeless!), wireless keyboard inspired by the [[https://github.com/tapioki/cephalopoda/tree/main/Architeuthis%20dux][Architeuthis Dux]].
|
|
This project used to use the [[https://github.com/soundmonster/samoklava][samoklava workflow]], however the auto-router had
|
|
troubles with the splay, currently I just use the image generating parts of the
|
|
samoklava workflow.
|
|
*This has now been printed and is working perfectly with ZMK!*
|
|
The ZMK shield can be found [[https://github.com/andrewjrae/zmk-config/tree/development/config/boards/shields/rae_dux][here]], as far as I can tell small custom projects
|
|
like this aren't to be merged into ZMK main, so you'll have to emulate what I'm
|
|
doing in my =zmk-config= here.
|
|
|
|
** Important Notes
|
|
- *Wireless only*, the 36-key diodeless approach uses the P0 pin which is usually dedicated to TRRS
|
|
- Since I ended up largely ditching the samoklava workflow, *the actions page with gerbers is out of date and no longer relevant**
|
|
- Their is only one MCU footprint, so *one controller has to be flipped* (I assume
|
|
if you can get this printed you can figure out the correct orientation)
|
|
- The [[./rae-dux.yaml][rae-dux.yaml]] file relies on [[https://github.com/andrewjrae/ergogen/tree/rae-dux][my fork of ergogen]] which naturally relies on
|
|
[[https://github.com/soundmonster/ergogen/tree/samoklava][soundmonster's fork of ergogen]], and a simple JST battery footprint inspired by
|
|
[[https://github.com/benvallack][@benvallack]].
|
|
- If you want to skip out on the switch, there is no jumper to use the JST
|
|
connector, so you'll have to bodge a wire somewhere, or try shorting the
|
|
switch footprint.
|
|
- Kicad files are 6.0, so unfortunately not backwards compatible.
|